Home Effect of Al on the glass forming ability of Zr–Ni –Cu–Al alloys
Article
Licensed
Unlicensed Requires Authentication

Effect of Al on the glass forming ability of Zr–Ni –Cu–Al alloys

  • Huan-Rong Wang EMAIL logo , Yi-Fu Ye , Guang-Hui Min , Jun-Yan Zhang , Xin-Ying Teng and Zhi-Qiang Shi
Published/Copyright: December 27, 2021
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 93 Issue 3

Abstract

Employing X-ray diffraction, scanning electron microscopy and differential scanning calorimetry techniques, the effect of the aluminium concentration on the glass forming ability (GFA) of Zr65Ni10Cu25–xAl x alloys were systematically studied. The experimental results show that with increasing Al concentration the supercooled liquid region of the as-quenched ribbons of Zr65Ni10Cu25–xAl x alloys increases and the critical cooling rate required to avoid crystallization during the rapid solidification for these alloys decreases, indicating that the GFA of Zr65Ni10Cu25–xAl x alloys is significantly improved by the addition of Al. The effect of Al on the GFA of Zr65Ni10Cu25–xAl x alloys is discussed from the micromechanism point of view.

Keywords: Glass forming ability; Zr–Cu–Ni–Al alloys; Supercooled liquid region; Glass transition
Huan-Rong Wang Key Laboratory of Liquid Structure and Heredity of Materials Shandong University Jinan, P. R. China Fax: +86 531 295 5999

  1. This work was supported by the National Natural Science Foundation of China (Project No. 59871025).

References

1 Peker, A.; Johnson, W. L.: Appl. Phys. Lett. 64 (1993) 2342.10.1063/1.110520Search in Google Scholar

2 Inoue, A.; Nishiyama, N.; Matsuda, T.: Mater. Trans. JIM 37 (1996) 181.10.2320/matertrans1989.37.181Search in Google Scholar

3 Inoue, A.; Ohtera, K.; Kita, K.; Masumoto, T.: Jpn. J. Appl. Phys. 27 (1988) L2248.10.1143/JJAP.27.L2248Search in Google Scholar

4 Inoue, A.; Zhang, T.; Itoi, T.: Mater. Trans. JIM 38 (1997) 359.10.2320/matertrans1989.38.359Search in Google Scholar

5 Xing, L.Q.; Eckert, J.; Loser,W.; Schultz, L.: Appl. Phys. Lett. 74 (1999) 664.10.1063/1.122980Search in Google Scholar

6 Inoue, A.: Acta mater. 48 (2000) 279.10.1016/S1359-6454(99)00300-6Search in Google Scholar

7 Köster, U.; Meinhardt, J.; Roos, S.; Rüdiger, A.: Mater. Sci. Forum 225–227 (1996) 311.10.4028/www.scientific.net/MSF.225-227.311Search in Google Scholar

8 Köster, U.; Meinhardt, J.; Roos, S.; Liebertz, H.: Appl. Phys. Lett. 69 (1996) 179.10.1063/1.117364Search in Google Scholar

9 Zander, D.; Köster, U.; Eliaz, N.; Eliezer, D.: Mater. Sci. Eng. 294–296 (2000) 112.10.1016/S0921-5093(00)01225-9Search in Google Scholar

10 Janlewing, R.; Köster, U.: Mater. Sci. Eng. A 304–306 (2001) 833.10.1016/S0921-5093(00)01574-4Search in Google Scholar

11 Zander, D.; Köster, U.: Mater. Sci. Eng. A 304–306 (2001) 292.10.1016/S0921-5093(00)01456-8Search in Google Scholar

12 Köster, U.; Zander, D.; Triwikantoro; Rüdiger, A.; Jastrow, L.: Scripta mater. 44 (2001) 1649.10.1016/S1359-6462(01)00875-2Search in Google Scholar

13 Li, C.; Saida, J.; Inoue, A.: Mater. Trans. JIM 11 (2000) 1521.10.2320/matertrans1989.41.1521Search in Google Scholar

14 Inoue, A.; Zhang, T.; Saida, J.; Matsushita, M.: Mater. Trans. JIM 41 (2000) 1511.10.2320/matertrans1989.41.1511Search in Google Scholar

15 Inoue, A.; Zhang, T.; Saida, J.; Matsushita, M.; Chen, M.W.; Sakurai, T.: Mater. Trans. JIM 40 (1999) 1137.10.2320/matertrans1989.40.1137Search in Google Scholar

16 Inoue, A.; Zhang, T.; Saida, J.; Matsushita, M.; Chen, M.W.; Sakurai, T.: Mater. Trans. JIM 40 (1999) 1181.10.2320/matertrans1989.40.1181Search in Google Scholar

17 Saida, J.; Matsushita, M.; Inoue, A.: Mater. Trans. JIM 41 (2000) 1505.10.2320/matertrans1989.41.1505Search in Google Scholar

18 Eckert, J.; Mattern, N.; Zinkevitch, M.; Seidel, M.: Mater. Trans. JIM 39 (1998) 623.10.2320/matertrans1989.39.623Search in Google Scholar

19 Gebert, A.; Eckert, J.; Schultz, L.: Acta mater. 46 (1998) 5475.10.1016/S1359-6454(98)00187-6Search in Google Scholar

20 Murty, B.S.; Hono, K.: Mater. Sci. Eng. A 312 (2001) 253.10.1016/S0921-5093(00)01861-XSearch in Google Scholar

21 Köster, U.; Meinhardt, J.; Roos, S.; Rüdiger, A.: Mater. Sci. Forum 225–227 (1996) 311.10.4028/www.scientific.net/MSF.225-227.311Search in Google Scholar

22 Kato, H.; Inoue, A.: Mater. Trans. JIM 38 (1997) 793.10.2320/matertrans1989.38.793Search in Google Scholar

23 Hirano, T.; Kato, H.; Matsuo, A.; Kawamura, Y.; Inoue, A.: Mater. Trans. JIM 41 (2000) 1454.10.2320/matertrans1989.41.1454Search in Google Scholar

24 Pang, S.; Zhang, T.; Kimura, H.; Asami, K.; Inoue, A.: Mater. Trans. JIM 41 (2000) 1490.10.2320/matertrans1989.41.1490Search in Google Scholar

25 Zhou, S.H.; Schmid, J.; Sommer, F.: Thermochimica Acta 339 (1999) 1.10.1016/S0040-6031(99)00216-6Search in Google Scholar

26 Inoue, A.; Zhang, T.; Masumoto, T.: J. Non-Cryst. Solids 156–158 (1993) 473.10.1016/0022-3093(93)90003-GSearch in Google Scholar

27 Xing, L.Q.; Ochin, P.; Bigot, J.: J. Non-Cryst. Solids 205–207 (1996) 637.10.1016/S0022-3093(96)00382-1Search in Google Scholar

28 Aziz, M.J.: J. Appl. Phys. 53 (1982) 1158.10.1063/1.329867Search in Google Scholar

29 Kurz, W.; Trivedi, R.: Metall. Trans. 22 A (1991) 3051.10.1007/BF02650266Search in Google Scholar

30 Zhang, T.; Inoue, A.; Masumoto, T.: Mater. Trans. JIM 11 (1991) 1005.10.2320/matertrans1989.32.1005Search in Google Scholar
Received: 2001-09-19
Published Online: 2021-12-27

© 2002 Carl Hanser Verlag, München

Articles in the same Issue

  1. Frontmatter
  2. Articles/Aufsätze
  3. Strain rate dependence of the deformation mechanisms in a fully lamellar γ-TiAl-based alloy
  4. Experimental and thermodynamic assessment of the Fe –Gd–Zr system
  5. Phase diagram of the Fe –Co –Ti system at 1073 K
  6. Copper concentration inside Guinier-Preston I zones formed in an Al –Cu alloy
  7. Identification of precipitates in 6013 aluminum alloy (Al –Mg –Si –Cu)
  8. Redistribution of phosphorus and carbon in steel weldments
  9. Microstructure and compressive properties of in situ synthesized TiC/Ti composites
  10. Effect of Al on the glass forming ability of Zr–Ni –Cu–Al alloys
  11. Fcc-hcp transformation-related internal friction in Fe –Mn alloys
  12. High-temperature stress and strain partitioning in duplex stainless steel
  13. Load sequence effects in the high cycle fatigue of two ferrite-pearlite microalloyed steels
  14. Characterization of intermetallic compounds formed during the interfacial reactions of liquid Sn and Sn– 58Bi solders with Ni substrates
  15. Notifications/Mitteilungen
  16. Personal/Personelles
https://doi.org/10.3139/ijmr-2002-0042
Keywords for this article
Glass forming ability; Zr–Cu–Ni–Al alloys; Supercooled liquid region; Glass transition

Articles in the same Issue

  1. Frontmatter
  2. Articles/Aufsätze
  3. Strain rate dependence of the deformation mechanisms in a fully lamellar γ-TiAl-based alloy
  4. Experimental and thermodynamic assessment of the Fe –Gd–Zr system
  5. Phase diagram of the Fe –Co –Ti system at 1073 K
  6. Copper concentration inside Guinier-Preston I zones formed in an Al –Cu alloy
  7. Identification of precipitates in 6013 aluminum alloy (Al –Mg –Si –Cu)
  8. Redistribution of phosphorus and carbon in steel weldments
  9. Microstructure and compressive properties of in situ synthesized TiC/Ti composites
  10. Effect of Al on the glass forming ability of Zr–Ni –Cu–Al alloys
  11. Fcc-hcp transformation-related internal friction in Fe –Mn alloys
  12. High-temperature stress and strain partitioning in duplex stainless steel
  13. Load sequence effects in the high cycle fatigue of two ferrite-pearlite microalloyed steels
  14. Characterization of intermetallic compounds formed during the interfacial reactions of liquid Sn and Sn– 58Bi solders with Ni substrates
  15. Notifications/Mitteilungen
  16. Personal/Personelles
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 25.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/ijmr-2002-0042/html
Scroll to top button