Thermoplastic Blends of PP and Waste Rubber Powder: Effects of Compatibilizer on Tensile Properties, Thermal Behavior and Decomposition Kinetics

References

Adhikari, B., De, D. and Maiti, S., “Reclamation and Recycling of Waste Rubber”, Prog. Polym. Sci., 25, 909–948 (2000) 10.1016/S0079-6700(00)00020-4Suche in Google Scholar

Bao, C., Guo, Y., Song, L. and Hu, Y., “Poly(vinyl alcohol) Nanocomposites Based on Graphene and Graphite Oxide: A Comparative Investigation of Property and Mechanism”, J. Mater. Chem., 21, 13942–13950 (2011) 10.1039/c1jm11662bSuche in Google Scholar

Carrasco, F., Pagès, P., Gámez-Pérez, J., Santana, O. O. and Maspoch, M. L., “Kinetics of the Thermal Decomposition of Processed Poly(lactic acid)”, Polym. Degrad. Stab., 95, 2508–2514 (2010) 10.1016/j.polymdegradstab.2010.07.039Suche in Google Scholar

Da Costa, H. M., Ramos, V. D. and Rocha, M. C. G., “Analysis of Thermal Properties and Impact Strength of PP/SRT, PP/EPDM and PP/SRT/EPDM Mixtures in Single Screw Extruder”, Polym. Test., 25, 498–503 (2006) 10.1016/j.polymertesting.2006.02.003Suche in Google Scholar

Da Silva, A. L. N., Rocha, M. C. G., Coutinho, F. M. B., Bretas, R. E. S. and Farah, M., “Evaluation of Rheological and Mechanical Behavior of Blends Based on Polypropylene and Metallocene Elastomers”, Polym. Test., 21, 647–652 (2002) 10.1016/S0142-9418(01)00137-4Suche in Google Scholar

Da Silva, A. L. N., Tavares, M. I. B., Politana, D. P., Coutinho, F. M. B. and Rocha, M. C. G., “Polymer Blends Based on Polyolefin Elastomer and Polypropylene”, J. Appl. Polym. Sci., 66, 2005–2014 (1997) 10.1002/(SICI)1097-4628(19971205)66:10<2005::AID-APP17>3.0.CO;2-2Suche in Google Scholar

Debapriya, D., Sukumar, M. and Basudam, A., “Reclaiming of Rubber by a Renewable Resource Material (RRM). II: Comparative Evaluation of Reclaiming Process of NR Vulcanizate by RRM and Diallyl Disulfide”, J. Appl. Polym. Sci., 73, 2951–2958 (1999) 10.1002/(SICI)1097-4628(19990929)73:14<2951::AID-APP19>3.0.CO;2-BSuche in Google Scholar

El-Nemr, K. F., Khalil, A. M., “Gamma Irradiation of Treated Waste Rubber Powder and Its Composites with Waste Polyethylene”, J. Vinyl. Add. Tech., 17, 58–63 (2011) 10.1002/vnl.20245Suche in Google Scholar

Gao, S. Q., Liu, H. P.: Capillary Mechanics (in Chinese), Science Press, Beijing, p. 38 (2010)Suche in Google Scholar

Ghaisas, S. S., Kale, D. D., Kim, J. G. and Jo, B. W., “Blends of Plasticized Poly(vinyl chloride) and Waste Flexible Poly(vinyl chloride) with Waste Nitrile Rubber Powder”, J. Appl. Polym. Sci., 91, 1552–1558 (2004) 10.1002/app.13137Suche in Google Scholar

Guo, B. H., Cao, Y., Jia, D. M. and Qiu, Q. H., “Thermoplastic Elastomers Derived from Scrap Rubber Powder/LLDPE Blend with LLDPE-graft-(Epoxidized Natural Rubber) Dual Compatibilizer”, Macromol. Mater. Eng., 289, 360–367 (2004) 10.1002/mame.200300311Suche in Google Scholar

Hong, C. K., Isayev, A. I., “Plastic/Rubber Blends of Ultrasonically Devulcanized GRT with HDPE”, J. Elastomers Plast., 33, 47–71 (2001) 10.1106/5AMQ-XEAY-A05B-P1FYSuche in Google Scholar

Huntsberger, J. R.: Interfacial Energies, Contact Angles, and Adhesion, Marcel Dekker, New York, p. 13 (1981)Suche in Google Scholar

Kim, H., Abdala, A. A. and Macosko, C. W., “Graphene/Polymer Nanocomposites”, Macromolecules, 43, 6515–6530 (2010) 10.1021/ma100572eSuche in Google Scholar

Kissinger, H. E., “Reaction Kinetics in Differential Thermal Analysis”, Anal. Chem., 29, 1702–1706 (1957) 10.1021/ac60131a045Suche in Google Scholar

Lee, S. H., Balasubramanian, M. and Kim, J. K., “Dynamic Reaction inside Co-rotating Twin Screw Extruder. II. Waste Ground Rubber Tire Powder/Polypropylene Blends”, J. Appl. Polym. Sci., 106, 3209–3219 (2007) 10.1002/app.26489Suche in Google Scholar

Lee, S. H., Shanmugharaj, A. M., Sridharc, V., Zhang, Z. X. and Kim, J. K., “Preparation and Characterization of Polypropylene and Waste Tire Powder Modified by Allylamine Blends”, Polym. Adv. Technol., 20, 620–625 (2009) 10.1002/pat.1307Suche in Google Scholar

Lee, S. H., Zhang, Z. X., Xu, D., Chung, D., Oh, J. G. and Kim, J. K., “Dynamic Reaction Involving Surface Modified Waste Ground Rubber Tire Powder/Polypropylene”, Polym. Eng. Sci., 49, 168–176 (2009) 10.1002/pen.21236Suche in Google Scholar

Lima, P. S., Oliveira, J. M. and Costa, V. A. F., “Crystallization Kinetics of Thermoplastic Elastomeric Blends Based on Ground Tyre Rubber”, J. Appl. Polym. Sci., 132, 42589 (2015) 10.1002/app.42589Suche in Google Scholar

Lima, P. S., Oliveira, J. M. and Costa, V. A. F., “Partial Replacement of EPR by GTR in Highly Flowable PP/EPR Blends: Effects on Morphology and Mechanical Properties”, J. Appl. Polym. Sci., 132, 42011 (2015) 10.1002/app.42011Suche in Google Scholar

Lima, P., Oliveira, J. and Costa, V., “Partial Replacement of EPDM by GTR in the Thermoplastic Elastomers Based on PP/EPDM: Effect on Morphology and Mechanical Properties”, J. Appl. Polym. Sci., 131, 40160 (2014) 10.1002/app.40160Suche in Google Scholar

Liu, H., Mead, J. L. and Stacer, R. G., “Thermoplastic Elastomers and Rubber-Toughened Plastics from Recycled Rubber and Plastics”, Rubber Chem. Technol., 75, 49–63 (2002) 10.5254/1.3547672Suche in Google Scholar

Magioli, M., Sirqueira, A. S. and Soares, B. G., “The Effect of Dynamic Vulcanization on the Mechanical, Dynamic Mechanical and Fatigue Properties of TPV Based on Polypropylene and Ground Tire Rubber”, Polym, Test., 29, 840–848 (2010) 10.1016/j.polymertesting.2010.07.008Suche in Google Scholar

Ouyang, C. F., Gao, Q., Shi, Y. T. and Shan, X. Q., “Compatibilizer in Waste Tire Powder and Low-Density Polyethylene Blends and the Blends Modified Asphalt”, J. Appl. Polym. Sci., 123, 485–492 (2012) 10.1002/app.34634Suche in Google Scholar

Pavia, D. L., Lampman, G. M. and Kriz, G. S.: Introduction to Spectroscopy: A Guide for Students of Organic Chemistry, 3^rd Edition, Harcourt Brace College Publishers, Washington, p. 48 (2000)Suche in Google Scholar

Shanmugharaj, A. M., Kim, J. K. and Ryu, S. H., “UV Surface Modification of Waste Tire Powder: Characterization and Its Influence on the Properties of Polypropylene/Waste Powder Composites”, Polym. Test., 24, 739–745 (2005) 10.1016/j.polymertesting.2005.04.006Suche in Google Scholar

Sonnier, R., Leroy, E., Clerc, L., Bergeret, A. and Lopez-Cuesta, J.M., “Polyethylene/Ground Tyre Rubber Blends: Influence of Particle Morphology and Oxidation on Mechanical Properties”, Polym. Test., 26, 274–281 (2007) 10.1016/j.polymertesting.2006.10.011Suche in Google Scholar

Sonnier, R., Leroy, E., Clerc, L., Bergeret, A. and Lopez-Cuesta, J. M., “Compatibilisation of Polyethylene/Ground Tyre Rubber Blends by γ Irradiation”, Polym, Degrad, Stab., 91, 2375–2379 (2006) 10.1016/j.polymdegradstab.2006.04.001Suche in Google Scholar

Tan, K. L., Li, C. X., Meng, H. and Wang, Z. H., “Preparation and Characterization of Thermoplastic Elastomer of Poly(vinyl chloride) and Chlorinated Waste Rubber”, Polym. Test., 28, 2–7 (2009). 10.1016/j.polymertesting.2008.08.003Suche in Google Scholar

Van der Wal, A., Mulder, J. J., Oderkerk, J. and Gaymans, R. J., “Polypropylene–Rubber Blends: 1. the Effect of the Matrix Properties on the Impact Behaviour”, Polymer, 39, 6781–6787 (1998) 10.1016/S0032-3861(98)00170-0Suche in Google Scholar

Wu, S.: Polymer Interface and Adhesion, CRC Press, New York, p. 89 (1982) 6275705Suche in Google Scholar

Yang, J. N., Nie, S. B. and Zhu, J. B., “A Comparative Study on Different Rubbery Modifiers: Effect on Morphologies, Mechanical and Thermal Properties of PLA Blends”, J. Appl. Polym. Sci., 133, 43340 (2016) 10.1002/app.43340Suche in Google Scholar

Yu, J. Y., Zhou, Z. F., Zhao, Q. N., Cheng, J. F. and Wen, D. J., “A Study of Interface Reaction between Amino Silane and Maleic Anhydride Grafted Polypropylene (in Chinese)”, Chin. J. Chem. Phys., 13, 109–112 (2000)Suche in Google Scholar

Zhang, S. L., Xin, Z. X., Zhang, Z. X. and Kim, J. K., “Characterization of the Properties of Thermoplastic Elastomers Containing Waste Rubber Tire Powder”, Waste Manage., 29, 1480–1485 (2009) 19070475 10.1016/j.wasman.2008.10.004Suche in Google Scholar PubMed

Zheng, A. N., Wang, H. G., Zhu, X. S. and Masuda, S., “Studies on the Interface of Glass Fiber-Reinforced Polypropylene Composite”, Compos. Interfaces, 9, 319–333 (2002) 10.1163/156855402760194683Suche in Google Scholar