Startseite Innovative Materials for Novel Concepts for Internal Heat Exchangers
Artikel Open Access

Innovative Materials for Novel Concepts for Internal Heat Exchangers

  • A. Rüppel , D. Jähnig , R.-U. Giesen , K. Vajen und H.-P. Heim
Veröffentlicht/Copyright: 27. Juli 2018
Artikel downloaden (PDF)
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 33 Heft 4

Received: 2017-01-23
Accepted: 2017-12-13
Published Online: 2018-07-27
Published in Print: 2018-08-10

© 2018, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Characterizing Ultrasonic Micro-Molding Process of Polyetheretherketone (PEEK)
  5. Innovative Materials for Novel Concepts for Internal Heat Exchangers
  6. Thermoplastic Blends of PP and Waste Rubber Powder: Effects of Compatibilizer on Tensile Properties, Thermal Behavior and Decomposition Kinetics
  7. Morphology Influence of Nanoporous Nickel Phosphate on Intumescent Flame Retardant Polypropylene Composites
  8. Electrospun Nanofiber-Based Cardo Poly(aryl ether sulfone) Containing Zwitterionic Side Groups as Novel Proton Exchange Membranes
  9. Modeling of Solid Conveying Pressure Throughput Behavior of Single Screw Smooth Barrel Extruders under Consideration of Backpressure and High Screw Speeds
  10. Morphology and Properties of Unvulcanized and Dynamically Vulcanized PVC/NBR Blend Reinforced by Graphene Nanoplatelets
  11. Investigation of Thermal and Dielectric Properties of Epoxy Based Hybrid Composites for Microelectronics Applications
  12. Electrical, Morphological and Thermal Properties of Microinjection Molded Polypropylene/Multi-Walled Carbon Nanotubes Nanocomposites
  13. Production of Thermoplastic Elastomers Based on Recycled PE and Ground Tire Rubber: Morphology, Mechanical Properties and Effect of Compatibilizer Addition
  14. Influence of PA6 as a Charring Agent on Flame Retardancy, Thermal and Mechanical Properties of LGFR PP Composites
  15. Numerical Investigations of Fiber Orientation Models for Injection Molded Long Fiber Composites
  16. Relaxation Behavior of Core-Shell Particles in PP/PMMA/PS Ternary Blends: The Effects of Composition, Viscosity Ratio and Temperature
  17. Effect of Addition of Styrene-Ethylene/Butylene-Styrene and the Type of Mica on the Mechanical Properties of Mica-Filled Polyethylene/Polypropylene Blends
  18. A Study of Concentrated Suspensions in Polyethylene Melts and the Impact on Viscosity and Polymer Processing Operations
  19. PPS News
  20. PPS News
  21. Seikei Kakou Abstracts
  22. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.3432
Creative Commons
BY 4.0

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Characterizing Ultrasonic Micro-Molding Process of Polyetheretherketone (PEEK)
  5. Innovative Materials for Novel Concepts for Internal Heat Exchangers
  6. Thermoplastic Blends of PP and Waste Rubber Powder: Effects of Compatibilizer on Tensile Properties, Thermal Behavior and Decomposition Kinetics
  7. Morphology Influence of Nanoporous Nickel Phosphate on Intumescent Flame Retardant Polypropylene Composites
  8. Electrospun Nanofiber-Based Cardo Poly(aryl ether sulfone) Containing Zwitterionic Side Groups as Novel Proton Exchange Membranes
  9. Modeling of Solid Conveying Pressure Throughput Behavior of Single Screw Smooth Barrel Extruders under Consideration of Backpressure and High Screw Speeds
  10. Morphology and Properties of Unvulcanized and Dynamically Vulcanized PVC/NBR Blend Reinforced by Graphene Nanoplatelets
  11. Investigation of Thermal and Dielectric Properties of Epoxy Based Hybrid Composites for Microelectronics Applications
  12. Electrical, Morphological and Thermal Properties of Microinjection Molded Polypropylene/Multi-Walled Carbon Nanotubes Nanocomposites
  13. Production of Thermoplastic Elastomers Based on Recycled PE and Ground Tire Rubber: Morphology, Mechanical Properties and Effect of Compatibilizer Addition
  14. Influence of PA6 as a Charring Agent on Flame Retardancy, Thermal and Mechanical Properties of LGFR PP Composites
  15. Numerical Investigations of Fiber Orientation Models for Injection Molded Long Fiber Composites
  16. Relaxation Behavior of Core-Shell Particles in PP/PMMA/PS Ternary Blends: The Effects of Composition, Viscosity Ratio and Temperature
  17. Effect of Addition of Styrene-Ethylene/Butylene-Styrene and the Type of Mica on the Mechanical Properties of Mica-Filled Polyethylene/Polypropylene Blends
  18. A Study of Concentrated Suspensions in Polyethylene Melts and the Impact on Viscosity and Polymer Processing Operations
  19. PPS News
  20. PPS News
  21. Seikei Kakou Abstracts
  22. Seikei-Kakou Abstracts
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 22.9.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.3432/html
Button zum nach oben scrollen