Startseite Studies on Methacrylate-hydroethyl Methacrylate Oil-absorptive Fiber
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Studies on Methacrylate-hydroethyl Methacrylate Oil-absorptive Fiber

  • Y. Feng und C. F. Xiao
Veröffentlicht/Copyright: 2. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 19 Heft 3

Abstract

A concept of potential crosslinker was introduced into the synthesizing process of highly oil-absorptive resin which is traditionally prepared by single chemical crosslinking. The resin was dissolved in DMAc and then span into fiber. The fiber was heated after spinning to obtain three-dimensional network structure. The effects of potential crosslinker content, crosslinked time and crosslinked temperature on the absorptive properties of fiber were studied. The structure of oil-absorptive fiber was analyzed by FTIR, DMA and SEM.

∗ Mail address: C. F. Xiao, Dept. of Materials Science, Tianjin Polytechnic University, Chenglin Zhuang Road 63, Tianjin, PRC E-mail:

References

1 U. S. Patent 5 763 083 (1998) Berrigan, M. R..Suche in Google Scholar

2 U. S. Patent 5 834 385 (1998) Blaney, C. A..Suche in Google Scholar

3 JP Patent 05 209217 (1993) Thucha, H..Suche in Google Scholar

4 JP Patent 0517537 (1993) Honda, T..Suche in Google Scholar

5 Mei, H. Z., Cho, W.-J.: J. Appl. Polym. Sci.85, p. 2119 (2002).10.1002/app.10778Suche in Google Scholar

6 Mei, H. Z., Cho, W.-J.: Polymer International50, p. 1193 (2001).10.1002/pi.762Suche in Google Scholar

7 Shimizu, T., Koshiro, S., Yamada, Y.: J. Appl. Polym. Sci.65, p. 179 (1997).10.1002/(SICI)1097-4628(19970705)65:1<179::AID-APP21>3.0.CO;2-YSuche in Google Scholar

8 Kim, S.-H., Chung, I.-D., Ha, C.-S.: J. Appl. Polym. Sci.73, p. 2349 (1999).10.1002/(SICI)1097-4628(19990919)73:12<2349::AID-APP4>3.0.CO;2-LSuche in Google Scholar

9 Jang, J., Kim, B.-S.: J. Appl. Polym. Sci.77, p. 903 (2000).10.1002/(SICI)1097-4628(20000725)77:4<903::AID-APP26>3.0.CO;2-ESuche in Google Scholar

10 Jang, J., Kim, B.-S.: J. Appl. Polym. Sci.77, p. 914 (2000).10.1002/(SICI)1097-4628(20000725)77:4<914::AID-APP27>3.0.CO;2-7Suche in Google Scholar

11 Mei, H. Z., Cho, W.-J.: J. Appl. Polym. Sci.89, p. 1818 (2003).10.1002/app.12252Suche in Google Scholar

Received: 2003-9-9
Accepted: 2004-3-9
Published Online: 2013-05-02
Published in Print: 2004-09-01

© 2004, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Polymer Processing Society Annual Meeting 21
  5. Screw Extrusion
  6. Parametric Study of the Mixing Efficiency in a Kneading Block Section of a Twin-screw Extruder
  7. Experiments on Characteristic Deformation and Breakup Behaviors of an Immiscible Drop in a Screw Channel Flow
  8. Die Extrusion
  9. Flow Balancing in Extrusion Dies for Thermoplastic Profiles
  10. Fiber
  11. Effects of Sparse Long Chain Branching on the Spinning Stability of LLDPEs
  12. Dry Spinning of Polymer Fibers in Ternary Systems
  13. Dry Spinning of Polymer Fibers in Ternary Systems
  14. Studies on Methacrylate-hydroethyl Methacrylate Oil-absorptive Fiber
  15. Film
  16. Numerical and Physical Modeling of Polymer Crystallization
  17. Numerical and Physical Modeling of Polymer Crystallization
  18. Modeling
  19. Study on Viscoelastic Behavior and Extrusion Blow Molding Processability of PP/PE Blends
  20. Simulation of Thermal Phenomena on the Interface Molten Polymer/Powder Polymer During Rotational Molding
  21. Effect of Mold Temperature on Structure and Property Variations of PBT Injection Moldings in the Thickness Direction
  22. Tensile and Flexural Properties of β-Nucleated Polypropylenes
  23. Predicting the Long-term Creep Behavior of Plastics Using the Short-term Creep Test
  24. PPS News
  25. PPS News
https://doi.org/10.3139/217.1823

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Polymer Processing Society Annual Meeting 21
  5. Screw Extrusion
  6. Parametric Study of the Mixing Efficiency in a Kneading Block Section of a Twin-screw Extruder
  7. Experiments on Characteristic Deformation and Breakup Behaviors of an Immiscible Drop in a Screw Channel Flow
  8. Die Extrusion
  9. Flow Balancing in Extrusion Dies for Thermoplastic Profiles
  10. Fiber
  11. Effects of Sparse Long Chain Branching on the Spinning Stability of LLDPEs
  12. Dry Spinning of Polymer Fibers in Ternary Systems
  13. Dry Spinning of Polymer Fibers in Ternary Systems
  14. Studies on Methacrylate-hydroethyl Methacrylate Oil-absorptive Fiber
  15. Film
  16. Numerical and Physical Modeling of Polymer Crystallization
  17. Numerical and Physical Modeling of Polymer Crystallization
  18. Modeling
  19. Study on Viscoelastic Behavior and Extrusion Blow Molding Processability of PP/PE Blends
  20. Simulation of Thermal Phenomena on the Interface Molten Polymer/Powder Polymer During Rotational Molding
  21. Effect of Mold Temperature on Structure and Property Variations of PBT Injection Moldings in the Thickness Direction
  22. Tensile and Flexural Properties of β-Nucleated Polypropylenes
  23. Predicting the Long-term Creep Behavior of Plastics Using the Short-term Creep Test
  24. PPS News
  25. PPS News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 2.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.1823/html?lang=de
Button zum nach oben scrollen