Home Technology Effect of temper rolling and subsequent annealing on texture development and magnetic permeability of semi-processed electrical steel with 2.3 wt.% Si
Article
Licensed
Unlicensed Requires Authentication

Effect of temper rolling and subsequent annealing on texture development and magnetic permeability of semi-processed electrical steel with 2.3 wt.% Si

  • Peyman Ahmadian and Abbas Akbarzadeh
Published/Copyright: October 3, 2018
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 109 Issue 10

Abstract

The effect of temper rolling and subsequent annealing on texture development and magnetic properties of semi-processed non grain oriented electrical steel has been investigated. The result shows that 5% temper rolling and final annealing at 850°C resulted in strong α-fiber component. The etch-pit technique shows that strain induced boundary migration is responsible for new texture component augmentation. Vibrating sample magnetometery reveals that maximum and minimum magnetic permeability are related to rolling and transverse directions, respectively. Average magnetic permeability is improved to some extent as a result of temper rolling and subsequent annealing.

Keywords: Temper rolling; Texture component; Etch-pit technique; Strain induced boundary migration; Magnetic permeability
*Correspondence address, Peyman Ahmadian, PhD, Department of Materials Science and Engineering, Sharif University of Technology, Azadi Avenue, Tehran, P.O. Box 11155-9466, Iran, Tel.: +98-9141066159, Fax: +98-21-22923647, E-mail: or
** Abbas Akbarzadeh, Department of Materials Science and Engineering, Sharif University of Technology, Azadi Avenue, Tehran, P.O. Box 11155-9466, Iran, Tel.: +98-2166165206, Fax: +98-21-66005717, E-mail:

References

[1] J.Park, J.Szpunar, S.Cha: Mater. Sci. Forum.412 (2002) 1263. 10.4028/www.scientific.net/MSF.408-412.1263Search in Google Scholar

[2] M.Mehdi, Y.He, E.J.Hilinski, A.Edrisy: J. Magn. Magn. Mater.429 (2017) 148. 10.1016/j.jmmm.2017.01.020Search in Google Scholar

[3] Y.He, E.J.Hilinski: J. Mater. Process. Tech242 (2017) 182. 10.1016/j.jmatprotec.2016.11.033Search in Google Scholar

[4] M.Wu, Y.Zeng: J. Magn. Magn. Mater.391 (2015) 96. 10.1016/j.jmmm.2015.04.085Search in Google Scholar

[5] P.Ghosh, R.R.Chromik, A.M.Knight, S.G.Wakade: J. Magn. Magn. Mater.356 (2014) 42. 10.1016/j.jmmm.2013.12.052Search in Google Scholar

[6] H.A.Weiss, N.Leuning, S.Steentjes, K.Hameyer, T.Andorfer, S.Jenner, W.Volk: J. Magn. Magn. Mater.421 (2017) 250. 10.1016/j.jmmm.2016.08.002Search in Google Scholar

[7] J.Hong, H.Choi, S.Lee, J.K.Kim, Y.Koo: J. Magn. Magn. Mater.439 (2017) 343. 10.1016/j.jmmm.2017.03.082Search in Google Scholar

[8] G.Zu, X.Zhang, J.Zhao, Y.Cui, Y.Wang, Z.Jiang: Mater. Design.85 (2015) 455. 10.1016/j.matdes.2015.07.007Search in Google Scholar

[9] N.Zhang, P.Yang, W.Mao: J. Magn. Magn. Mater.397 (2016) 125. 10.1016/j.jmmm.2015.08.066Search in Google Scholar

[10] K.M.Lee, M.Y.Huh, H.J.Lee, J.T.Park, J.S.Kim, E.J.Shin, O.Engler: J. Magn. Magn. Mater.396 (2015) 53. 10.1016/j.jmmm.2015.08.010Search in Google Scholar

[11] X.Bian, Y.Zeng, D.Nan, M.Wu: J. Alloys Compd.588 (2014) 108. 10.1016/j.jallcom.2013.11.010Search in Google Scholar

[12] J.H.Yu, J.S.Shin, J.S.Bae, Z.Lee, T.D.Lee, H.M.Lee, E.J.Lavernia: Mater. Sci. Eng.A 307 (2001) 29. 10.1016/S0921-5093(00)01960-2Search in Google Scholar

[13] E.J.Gutierrez-Castaneda, A.Salinas-Rodriguez: J. Magn. Magn. Mater.323 (2011) 2524. 10.1016/j.jmmm.2011.05.039Search in Google Scholar

[14] Y.He, E.J.Hilinski: J. Magn. Magn. Mater.405 (2015) 337. 10.1016/j.jmmm.2015.12.057Search in Google Scholar

[15] M.Sanjari, Y.He, E.J.Hilinski, S.Yue, L.A.I.Kestens: Scripta mater.124 (2016) 179. 10.1016/j.scriptamat.2016.07.005Search in Google Scholar

[16] K.M.Lee, S.Y.Park, M.Y.Huh, J.S.Kim, O.Engler: J. Magn. Magn. Mater.354 (2014) 324. 10.1016/j.jmmm.2013.11.030Search in Google Scholar

[17] H.Li, H.Liu, Y.Liu, Z.Liu, G.Cao, Z.Luo, F.Zhang, S.Chen, L.Lyu, G.Wang: J. Magn. Magn. Mater.370 (2014) 6. 10.1016/j.jmmm.2014.06.053Search in Google Scholar

[18] T.Shimazu, M.Shiozaki, K.Kawasaki: J. Magn. Magn. Mater.8853 (1994) 2. 10.1016/0304-8853(94)90509-6Search in Google Scholar

[19] J.Barros, A.Targhetta, O.León, T.Ros, J.Schneider, Y.Houbaert: J. Magn. Magn. Mater.316 (2007) 865. 10.1016/j.jmmm.2007.03.124Search in Google Scholar

[20] B.D.Cullity, C.D.Graham: Introduction to magnetic materials, John Wiley & Sons (2011).Search in Google Scholar

[21] F.Humphreys, M.Hatherly: Recrystallization and related annealing phenomena, Elsevier (2012).Search in Google Scholar

[22] I. VGervasyeva, B.K.Sokolov, A.K.Sbitnev: Texture, Stress, and Microstructure.25 (1996) 109. 10.1155/TSM.25.109Search in Google Scholar

Received: 2018-01-09
Accepted: 2018-04-24
Published Online: 2018-10-03
Published in Print: 2018-10-16

© 2018, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Statistical analysis of micropore size distributions in Al–Si castings evaluated by X-ray computed tomography
  5. Effect of processing parameters on the microstructural and mechanical properties of aluminum–carbon nanotube composites produced by spark plasma sintering
  6. Synthesis of ZnO nanomaterials with different morphologies by hydrothermal method
  7. Dielectric studies of CCTO-based nanocomposite ceramic synthesized by a solid state route
  8. Effect of laser forming on mechanical properties of multiple-phase steels by using a thermal–microstructure–mechanical model
  9. Effect of temper rolling and subsequent annealing on texture development and magnetic permeability of semi-processed electrical steel with 2.3 wt.% Si
  10. Compressive behavior of double-layered functionally graded 316L stainless steel foam
  11. Microstructure and mechanical behavior of Mg–Y–Zn alloys with respect to varying content of LPSO phase
  12. Microstructural evolution of semi-solid A356 alloy during reheating
  13. Lewis–Br⊘nsted induction acidity in SBA-15 modified with Zr and P
  14. Short Communications
  15. Nanophase formation during the heat treatment of Al-13Si-5Cu-2Ni-1Mg alloy and the abnormal enhancement of its tensile properties
  16. Effect of minor Nd substitution for Y on microstructure and corrosion resistance of extruded Mg–Zn–Y alloy
  17. DGM News
  18. DGM News
https://doi.org/10.3139/146.111687
Keywords for this article
Temper rolling; Texture component; Etch-pit technique; Strain induced boundary migration; Magnetic permeability

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Statistical analysis of micropore size distributions in Al–Si castings evaluated by X-ray computed tomography
  5. Effect of processing parameters on the microstructural and mechanical properties of aluminum–carbon nanotube composites produced by spark plasma sintering
  6. Synthesis of ZnO nanomaterials with different morphologies by hydrothermal method
  7. Dielectric studies of CCTO-based nanocomposite ceramic synthesized by a solid state route
  8. Effect of laser forming on mechanical properties of multiple-phase steels by using a thermal–microstructure–mechanical model
  9. Effect of temper rolling and subsequent annealing on texture development and magnetic permeability of semi-processed electrical steel with 2.3 wt.% Si
  10. Compressive behavior of double-layered functionally graded 316L stainless steel foam
  11. Microstructure and mechanical behavior of Mg–Y–Zn alloys with respect to varying content of LPSO phase
  12. Microstructural evolution of semi-solid A356 alloy during reheating
  13. Lewis–Br⊘nsted induction acidity in SBA-15 modified with Zr and P
  14. Short Communications
  15. Nanophase formation during the heat treatment of Al-13Si-5Cu-2Ni-1Mg alloy and the abnormal enhancement of its tensile properties
  16. Effect of minor Nd substitution for Y on microstructure and corrosion resistance of extruded Mg–Zn–Y alloy
  17. DGM News
  18. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 1.2.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.111687/html
Scroll to top button