Diffusion behaviour of Pt in platinum aluminide coatings during thermal cycles

Liya Ye; Hongfei Chen; Guang Yang; Yuanyuan Cui; Hongjie Luo; Bin Liu; Lingyi Qian; Yanfeng Gao

doi:10.3139/146.111572

Startseite Technik Diffusion behaviour of Pt in platinum aluminide coatings during thermal cycles

Artikel Open Access

Diffusion behaviour of Pt in platinum aluminide coatings during thermal cycles

Liya Ye , Hongfei Chen , Guang Yang , Yuanyuan Cui , Hongjie Luo , Bin Liu , Lingyi Qian und Yanfeng Gao

Veröffentlicht/Copyright: 18. Dezember 2017

Artikel downloaden (PDF)

Veröffentlicht von

Veröffentlichen auch Sie bei De Gruyter Brill

Manuskript einreichen Informationen für Autor*innen

Aus der Zeitschrift International Journal of Materials Research Band 109 Heft 1

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Ye, Liya, Chen, Hongfei, Yang, Guang, Cui, Yuanyuan, Luo, Hongjie, Liu, Bin, Qian, Lingyi and Gao, Yanfeng. "Diffusion behaviour of Pt in platinum aluminide coatings during thermal cycles" International Journal of Materials Research, vol. 109, no. 1, 2018, pp. 3-9. https://doi.org/10.3139/146.111572

Ye, L., Chen, H., Yang, G., Cui, Y., Luo, H., Liu, B., Qian, L. & Gao, Y. (2018). Diffusion behaviour of Pt in platinum aluminide coatings during thermal cycles. International Journal of Materials Research, 109(1), 3-9. https://doi.org/10.3139/146.111572

Ye, L., Chen, H., Yang, G., Cui, Y., Luo, H., Liu, B., Qian, L. and Gao, Y. (2018) Diffusion behaviour of Pt in platinum aluminide coatings during thermal cycles. International Journal of Materials Research, Vol. 109 (Issue 1), pp. 3-9. https://doi.org/10.3139/146.111572

Ye, Liya, Chen, Hongfei, Yang, Guang, Cui, Yuanyuan, Luo, Hongjie, Liu, Bin, Qian, Lingyi and Gao, Yanfeng. "Diffusion behaviour of Pt in platinum aluminide coatings during thermal cycles" International Journal of Materials Research 109, no. 1 (2018): 3-9. https://doi.org/10.3139/146.111572

Ye L, Chen H, Yang G, Cui Y, Luo H, Liu B, Qian L, Gao Y. Diffusion behaviour of Pt in platinum aluminide coatings during thermal cycles. International Journal of Materials Research. 2018;109(1): 3-9. https://doi.org/10.3139/146.111572

Kopie

In die Zwischenablage kopiert

BibTeX EndNote RIS

Received: 2017-03-03

Accepted: 2017-08-08

Published Online: 2017-12-18

Published in Print: 2018-01-09

Artikel in diesem Heft

Contents
Contents
Original Contributions
Diffusion behaviour of Pt in platinum aluminide coatings during thermal cycles
Ternary Al–Mo–Y phase diagram and the new phase Al₄Mo₂Y
Evaluation of the thixoformability of 318.1 aluminum alloy
High temperature tensile behavior of Mg-2Al and Mg-6Al alloys
Anisotropic thermomechanical behavior of AA6082 aluminum alloy Al–Mg–Si–Mn
Significant enhancement of bond strength in the roll bonding process using Pb particles
Nanoindentation characterization of Al-matrix nanocomposites produced via spark plasma sintering
Study and development of NiAl intermetallic coating on hypo-eutectoid steel using highly activated composite granules of the Ni–Al system
Elaboration of a triphasic calcium phosphate and silica nanocomposite for maxillary grafting and deposition on titanium implants
Short Communications
Microstructural effects of isothermal aging on a doped SAC solder alloy
Two-stage synthesis of ultrafine powder of chromium carbide
DGM News
DGM News

Zeitschrift durchsuchen In dieser Zeitschrift suchen

https://doi.org/10.3139/146.111572

Schlagwörter für diesen Artikel

Platinum aluminide; Bond coat; Diffusion

Creative Commons

BY 4.0

Artikel in diesem Heft

Contents
Contents
Original Contributions
Diffusion behaviour of Pt in platinum aluminide coatings during thermal cycles
Ternary Al–Mo–Y phase diagram and the new phase Al₄Mo₂Y
Evaluation of the thixoformability of 318.1 aluminum alloy
High temperature tensile behavior of Mg-2Al and Mg-6Al alloys
Anisotropic thermomechanical behavior of AA6082 aluminum alloy Al–Mg–Si–Mn
Significant enhancement of bond strength in the roll bonding process using Pb particles
Nanoindentation characterization of Al-matrix nanocomposites produced via spark plasma sintering
Study and development of NiAl intermetallic coating on hypo-eutectoid steel using highly activated composite granules of the Ni–Al system
Elaboration of a triphasic calcium phosphate and silica nanocomposite for maxillary grafting and deposition on titanium implants
Short Communications
Microstructural effects of isothermal aging on a doped SAC solder alloy
Two-stage synthesis of ultrafine powder of chromium carbide
DGM News
DGM News