Startseite Verification of strength mis-match of electron beam welded heavy thickness titanium alloy
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Verification of strength mis-match of electron beam welded heavy thickness titanium alloy

  • Pengfei Fu , Zhiyong Mao , Shuili Gong , Zhenyun Tang und Congjin Zuo
Veröffentlicht/Copyright: 4. Mai 2017
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 108 Heft 5

Abstract

Electron beam welding was employed on Ti-6Al-4V ELI alloy with 50 mm thickness. The weld morphologies were I and T shape, respectively with and without oscillation. The microhardness profiles and tensile properties of the welds were measured along the penetration, and the mis-match was investigated. The maximum microhardness was in the welds and was at least 1.06 times that of the base metal. In addition, the hardness distribution of the I shape weld was more homogeneous than that of the T shape. The tensile strengths of the welds were higher than the base metal, and the properties of the I shape weld were more homogeneous. The mis-match factors of the welds were above 1.0, and the strengths of the joints were equivalent to the base metal, which verified the overmatching. The microstructure and hardness difference resulted in inhomogeneous stress–strain behavior of the joint, which contributed to the overmatching.

Keywords: Electron beam welding; Weld morphology; Microhardness; Yield strength; Mis-match
*Correspondence address, Dr. Pengfei Fu, Science and Technology on Power Beam Processes Laboratory, Beijing Aeronautical Manufacturing Technology Research Institute, No. 1, Baliqiaobei, Chaoyang Dist., Beijing 100024, P. R. China, Tel.: +86-10-85701588, Fax: +86-10-85701491, E-mail:

References

[1] L.Zhou, H.Chang, Y.F.Lu, D.S.Xu, in: V.Varyukhin, Y.Beygelzimer, R.Kulagin, A.Reshetov (Eds.), Proc. 12th World Conf. Titanium (Volume IITi-2011), Science Press, Beijing, China (2012). 10.1007/s11837-011-0166-3Suche in Google Scholar

[2] J.C.Williams: Titanium and Titanium Alloys, Springer, Berlin, Germany (2013). 10.1007/978-1-4757-1758-7Suche in Google Scholar

[3] H.Burte: Titanium Science and Technology, Springer, New York, USA (2013). 10.1007/978-1-4757-1346-6Suche in Google Scholar

[4] F.H.Froes: Titanium: Physical Metallurgy, Processing and Applications, ASM International, Chicago, USA (2015). 10.1007/978-1-62708-079-8Suche in Google Scholar

[5] Z.S.Zhu: Research and Development of New-brand Titanium Alloys of High Performance for Aeronautical Applications, Aviation Industry Press, Beijing, China (2013). 10.7516503118/13/978-7-5165-0311-9Suche in Google Scholar

[6] Q.Du, J.Q.Ni, D.W.Shao, J.Cai, Y.MLiu, R.HChang: Weld. Mater. Mech. Eng.40 (2016) 32. 10.11973/jxgccl201607007Suche in Google Scholar

[7] A.Yazdipour, M.R.O.Ghaderi: Inter. J. Adv. Manuf. Technol.72 (2014) 619. 10.1007/s00170-014-5682-1Suche in Google Scholar

[8] Z.Yang, B.Qi, B.Cong, F.Liu, M.Yang: J. Mater. Proc. Technol.216 (2015) 37. 10.1016/j.jmatprotec.2014.08.026Suche in Google Scholar

[9] J.Xiong, S.Li, F.Gao, J.Zhang: Mater. Sci. Eng. A640 (2015) 419. 10.1016/j.msea.2015.06.022Suche in Google Scholar

[10] H.Y.Qi, L.Q.Ma, S.L.Li, X.G.Yang: Rare Metals35 (2015) 230. 10.1007/s12598-015-0541-2Suche in Google Scholar

[11] P.Liu, T.Zhai, Y.B.Zhang: High Temp. Mater. Processes35 (2015) 607. 10.1515/htmp-2015-0033Suche in Google Scholar

[12] S.Q.Wang, W.Y.Li, Y.Zhou, X.Li, D.LChen: Mater. Sci. Eng. A649 (2016) 146. 10.1016/j.msea.2015.09.107Suche in Google Scholar

[13] P.D.Edwards, M.Ramulu: Fatigue Fract. Eng. Mater. Struct.39 (2016) 1226. 10.1111/ffe.12434Suche in Google Scholar

[14] V.A.Kumar, R.K.Gupta, S.K.Manwatkar, P.Ramkumar, P.V.Venkitakrishnan: J. Mater. Eng. Perform.25 (2016) 2147. 10.1007/s11665-016-2111-7Suche in Google Scholar

[15] C.Liu, J.Zhang, B.Wu, S.L.Gong: Mater. Des.34 (2012) 609. 10.1016/j.matdes.2011.05.014Suche in Google Scholar

[16] B.G.Zhang, M.X.Shi, G.Q.Chen, J.C.Feng: Trans. Nonferrous Met. Soc. China22 (2012) 2633. (11)61510–0. 10.1016/S1003-6326Suche in Google Scholar

[17] B.Wu, J.W.Li, Z.Y.Tang: Rare Met. Mater. Eng.43 (2014) 786. 10.1016/S1875-5372(14)60084-9Suche in Google Scholar

[18] P.F.Fu, Z.Y.Mao, C.J.Zuo, Y.JWang, C.M.Wang: Chin. J. Aeronaut.27 (2014) 1015. 10.1016/j.cja.2014.03.020Suche in Google Scholar

[19] M.Koçak, S.Webster, I.Hadley: Key Eng. Mater.345–346 (2007)401. 10.4028/www.scientific.net/KEM.345-346.401Suche in Google Scholar

[20] M.Koçak: 63rd Ann. Assy. Inter. Conf., Istanbul, GEV&TKTA, Turkey (2010) 1. 10.1007/BF03266733Suche in Google Scholar

[21] M.Koçak, M.Pakdil, G.Çam: Sci. Technol. Weld. Joining7 (2002) 187. 10.1179/136217102225004220Suche in Google Scholar

[22] G.Çam, V.Ventzke, J.F.D.Santos, M.Koçak, G.Jennequin, P.G.Maurin: Sci. Technol. Weld. Joining4 (2013) 317. 10.1179/136217199101537941Suche in Google Scholar

[23] P.F.Fu, Z.Y.Mao, Y.J.Wang, C.J.Zuo, H.Y.Xu: Mater. Sci. Eng. A608 (2014) 199. 10.1016/j.msea.2014.04.048Suche in Google Scholar

Received: 2016-11-21
Accepted: 2017-02-14
Published Online: 2017-05-04
Published in Print: 2017-05-15

© 2017, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Downloads and the impact of Open Access at IJMR
  5. Original Contributions
  6. A material selection approach using the TODIM (TOmada de Decisao Interativa Multicriterio) method and its analysis
  7. Investigation of the influence of Fe on the microstructure and properties of Ti5553 near-β titanium alloy with combinatorial approach
  8. Evolution of the temperature, microstructures and microsegregation in equiaxed solidification of Al-5 wt.% Cu alloy
  9. Phase composition and microstructure of materials in the Ir–Ru–B system prepared by arc melting and VHP sintering
  10. Thermal shock behavior of rare earth modified alumina ceramic composites
  11. Investigation of tribological and corrosion properties of CuTi–alumina nanocomposite fabricated by mechanical alloying
  12. Effect of acetic acid on corrosion behavior of AISI 201, 304 and 430 stainless steels
  13. Verification of strength mis-match of electron beam welded heavy thickness titanium alloy
  14. Short Communications
  15. Effect of toughening Fe2B by the addition of tungsten on the wear resistance of Fe–B–C alloy
  16. Microstructural stability of heat-resistant high-pressure die-cast Mg-4Al-4Ce alloy
  17. DGM News
  18. DGM News
https://doi.org/10.3139/146.111495
Schlagwörter für diesen Artikel
Electron beam welding; Weld morphology; Microhardness; Yield strength; Mis-match

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Downloads and the impact of Open Access at IJMR
  5. Original Contributions
  6. A material selection approach using the TODIM (TOmada de Decisao Interativa Multicriterio) method and its analysis
  7. Investigation of the influence of Fe on the microstructure and properties of Ti5553 near-β titanium alloy with combinatorial approach
  8. Evolution of the temperature, microstructures and microsegregation in equiaxed solidification of Al-5 wt.% Cu alloy
  9. Phase composition and microstructure of materials in the Ir–Ru–B system prepared by arc melting and VHP sintering
  10. Thermal shock behavior of rare earth modified alumina ceramic composites
  11. Investigation of tribological and corrosion properties of CuTi–alumina nanocomposite fabricated by mechanical alloying
  12. Effect of acetic acid on corrosion behavior of AISI 201, 304 and 430 stainless steels
  13. Verification of strength mis-match of electron beam welded heavy thickness titanium alloy
  14. Short Communications
  15. Effect of toughening Fe2B by the addition of tungsten on the wear resistance of Fe–B–C alloy
  16. Microstructural stability of heat-resistant high-pressure die-cast Mg-4Al-4Ce alloy
  17. DGM News
  18. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 16.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111495/pdf?lang=de
Button zum nach oben scrollen