Fast microwave synthesis and characterization of MgTi2O5
-
Gülşah Çelik
and Figen Kurtuluş
Abstract
Magnesium dititanate, MgTi2O5 was obtained via a microwave synthesis method. Powder X-ray diffraction, infrared spectroscopy and thermogravimetric/differantial thermal analysis measurements have been used to characterize the sample.
References
[1] Y.Suzuki, Y.Shinoda: Sci. Technol. Adv. Mater.12 (2011) 034301. 10.1088/1468-6996/12/3/034301Search in Google Scholar
[2] J.F.W.Bowles: Am. Mineral.73 (1988) 1377.Search in Google Scholar
[3] F.Matteucci, G.Cruciani, M.Dondi, G.Gasparotto, D.M.Tobaldi: J. Solid State Chem.180 (2007) 3196. 10.1016/j.jssc.2007.08.029Search in Google Scholar
[4] R.D.Purohit, S.Saha: Ceram. Int.25 (1999) 475. 10.1016/S0272-8842(98)00062-5Search in Google Scholar
[5] N.E.Brown, A.Natrovsky: Am. Mineral.74 (1989) 902.Search in Google Scholar
[6] T.Lopez, J.H.Ventura, D.H.Aguilar, P.Quintana: J. Nanosci. Nanotech.8 (2008) 6608. 10.1166/jnn.2008.039Search in Google Scholar
[7] C.H.Lee, S.I.Kim: Integ. Ferroelectr.57 (2003) 1265. 10.1080/10584580390259821Search in Google Scholar
[8] O.Yamaguchi, S.Yamamoto, K.Shimizu: Ceram. Int.7 (1981) 73. 10.1016/0272-8842(81)90018-3Search in Google Scholar
[9] T.López, J.Hernández, R.Gómez, X.Bokhimi, J.L.Boldú, E.Muñoz, O.Novaro, A.G.Ruiz: Langmuir15 (1999) 5689. 10.1021/la9812931Search in Google Scholar
[10] L.Todan, T.Dascalescu, S.Preda, C.Andronescu, C.Munteanu, D.C.Culita, A.Rusu, R.State, M.Zaharescu: Ceram. Int.40 (2014) 15693. 10.1016/j.ceramint.2014.07.092Search in Google Scholar
© 2015, Carl Hanser Verlag, München
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- Phase equilibria studies of the “MnO”–Al2O3–SiO2 system in equilibrium with metallic alloy. Part 2: phase equilibria
- X-ray stress measurement from an imperfect Debye–Scherrer ring
- Effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy
- Quantification of roping in aluminium sheet alloys for car body applications by combining 3D surface measurements with Fourier analysis
- Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
- Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
- Corrosion performance and microstructural response of A380 matrix alloy reinforced with sol–gel TiO2-coated SiC particles: a perspective on previous studies
- Role of chloride in the electrochemical behaviour of AZ31B Mg alloy
- Implications of solute super-saturation in growth of vaporisation-induced recrystallised grains during heat treatment in Ni-base superalloys
- Rapid synthesis of Mn3O4 powder from pyro-synthesis of ethylene glycol–metal nitrate precursor assisted by nitric acid
- Production of bioactive glass-derived scaffolds using citric acid porogen
- Short Communications
- Microstructure and mechanical properties of deformed Mg–Mn–Sn alloys
- Fast microwave synthesis and characterization of MgTi2O5
- Time dependent synthesis of crystalline Bi2S3 and its application as a sensitizer in SnO2 based solar cells
- Synthesis of cobalt-doped CdS (CdS:Co) by a simple and rapid microwave activated method and investigating optical properties
- People
- In Memoriam Volker Schumacher
- DGM News
- DGM News
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- Phase equilibria studies of the “MnO”–Al2O3–SiO2 system in equilibrium with metallic alloy. Part 2: phase equilibria
- X-ray stress measurement from an imperfect Debye–Scherrer ring
- Effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy
- Quantification of roping in aluminium sheet alloys for car body applications by combining 3D surface measurements with Fourier analysis
- Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
- Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
- Corrosion performance and microstructural response of A380 matrix alloy reinforced with sol–gel TiO2-coated SiC particles: a perspective on previous studies
- Role of chloride in the electrochemical behaviour of AZ31B Mg alloy
- Implications of solute super-saturation in growth of vaporisation-induced recrystallised grains during heat treatment in Ni-base superalloys
- Rapid synthesis of Mn3O4 powder from pyro-synthesis of ethylene glycol–metal nitrate precursor assisted by nitric acid
- Production of bioactive glass-derived scaffolds using citric acid porogen
- Short Communications
- Microstructure and mechanical properties of deformed Mg–Mn–Sn alloys
- Fast microwave synthesis and characterization of MgTi2O5
- Time dependent synthesis of crystalline Bi2S3 and its application as a sensitizer in SnO2 based solar cells
- Synthesis of cobalt-doped CdS (CdS:Co) by a simple and rapid microwave activated method and investigating optical properties
- People
- In Memoriam Volker Schumacher
- DGM News
- DGM News