Dielectric and magnetic properties of Ba0.8Sr0.2TiO3 – Y3Fe5O12 – YFeO3 composites
-
Yanyan Yang
Abstract
Ba0.8Sr0.2TiO3 – Y3Fe5O12 – YFeO3 (BST-YIG-YIP) composites were prepared via the in-situ growth solid-state method. The composites were obtained by sintering green bodies composed of Ba0.8Sr0.2TiO3 and Y3Fe5O12 powders at 1 350 °C. The phase composition and microstructure of the composites were analyzed. The dielectric and magnetic properties of the composites were also investigated. The results show that the as-prepared BST-YIG-YIP composites have large dielectric constants, high permeabilities and high saturation magnetizations.
References
[1] H.B.Yang, H.Wang, L.He, X.Yao: J. Phys. Chem. Solids73 (2012) 454. 10.1016/j.jpcs.2011.10.021Suche in Google Scholar
[2] S.W.Phang, M.Tadokoro, J.Watanabe, N.Kuramoto: Polym. Adv. Technol.20 (2009) 550. 10.1002/pat.1381Suche in Google Scholar
[3] L.P.Curecheriu, M.T.Buscaglia, V.Buscaglia, L.Mitoseriu, P.Postolache: J. Appl. Phys.107 (2010) 1041061. 10.1063/1.3340844Suche in Google Scholar
[4] J.L.Chen, Z.Xu, S.B.Qu, X.Y.Wei, X.H.Liu: Ceram. Int.34 (2008) 803. 10.1016/j.ceramint.2006.07.009Suche in Google Scholar
[5] H.B.Yang, H.Wang, F.Xiang, X.Yao: J. Am. Ceram. Soc.92 (2009) 2005. 10.1111/j.1551-2916.2008.02867.xSuche in Google Scholar
[6] H.B.Yang, H.Wang, L.He, L.Shui, X.Yao: J. Appl. Phys.108 (2010) 074105. 10.1063/1.3437650Suche in Google Scholar
[7] Q.Q.Ke, X.J.Lou, Y.Wang, J.Wang: Phys. Rev. B82 (2010) 024102. 10.1103/PhysRevA.82.024102Suche in Google Scholar
[8] H.Rikukawa: IEEE Trans. Magn.18 (1982) 1535. 10.1109/TMAG.1982.1062065Suche in Google Scholar
[9] J.L.Snoek: Physica, Amsterdam University (1948).Suche in Google Scholar
[10] X.P.Yuan, Y.K.Tang, Y.Sun, M.X.Xu: J. Appl. Phys.111 (2012) 05391. 10.1063/1.3670511Suche in Google Scholar
© 2014, Carl Hanser Verlag, München
Artikel in diesem Heft
- Contents
- Contents
- Review
- Research trends in microwave dielectrics and factors affecting their properties: A review
- Original Contributions
- Efficiency and work performance of TiNi alloy undergoing B2 ↔ R martensitic transformation
- Fabrication of Gasar made from Cu-24 wt.% Mn alloy
- Effect of intermediate frequency electromagnetic field on the solidification structure and mechanical properties of direct chill cast Al-8 wt.%Si alloy
- Effect of Ni-based conversion coating and Ni–P electroless plating on the bonding process of pure Al and AZ31 alloy
- Effect of ball milling time on the synthesis of nanocrystalline merwinite via mechanical activation and heat treatment
- Structural and magnetic properties of Fe–Al2O3 soft magnetic composites prepared using the sol–gel method
- Improved dielectric performance of barium strontium titanate multilayered capacitor by means of pulsed laser deposition and slow injection sol–gel methods
- Effect of heat treatment on the slurry erosion resistance of high strength steel DP980
- Development of biomimetic gelatin–chitosan/hydroxyapatite nanocomposite via double diffusion method for biomedical applications
- Short Communications
- Effects of rolling rate on microstructure and mechanical properties of Mg sheets
- Effect of post-weld heat treatment on dissimilar friction stir welded AA6063 and A319 aluminium alloys
- Dielectric and magnetic properties of Ba0.8Sr0.2TiO3 – Y3Fe5O12 – YFeO3 composites
- Microwave-assisted modulated synthesis of zirconium-based metal–organic framework (Zr-MOF) for hydrogen storage applications
- DGM News
- DGM News
Artikel in diesem Heft
- Contents
- Contents
- Review
- Research trends in microwave dielectrics and factors affecting their properties: A review
- Original Contributions
- Efficiency and work performance of TiNi alloy undergoing B2 ↔ R martensitic transformation
- Fabrication of Gasar made from Cu-24 wt.% Mn alloy
- Effect of intermediate frequency electromagnetic field on the solidification structure and mechanical properties of direct chill cast Al-8 wt.%Si alloy
- Effect of Ni-based conversion coating and Ni–P electroless plating on the bonding process of pure Al and AZ31 alloy
- Effect of ball milling time on the synthesis of nanocrystalline merwinite via mechanical activation and heat treatment
- Structural and magnetic properties of Fe–Al2O3 soft magnetic composites prepared using the sol–gel method
- Improved dielectric performance of barium strontium titanate multilayered capacitor by means of pulsed laser deposition and slow injection sol–gel methods
- Effect of heat treatment on the slurry erosion resistance of high strength steel DP980
- Development of biomimetic gelatin–chitosan/hydroxyapatite nanocomposite via double diffusion method for biomedical applications
- Short Communications
- Effects of rolling rate on microstructure and mechanical properties of Mg sheets
- Effect of post-weld heat treatment on dissimilar friction stir welded AA6063 and A319 aluminium alloys
- Dielectric and magnetic properties of Ba0.8Sr0.2TiO3 – Y3Fe5O12 – YFeO3 composites
- Microwave-assisted modulated synthesis of zirconium-based metal–organic framework (Zr-MOF) for hydrogen storage applications
- DGM News
- DGM News
