Home Dielectric and magnetic properties of Ba0.8Sr0.2TiO3 – Y3Fe5O12 – YFeO3 composites
Article
Licensed
Unlicensed Requires Authentication

Dielectric and magnetic properties of Ba0.8Sr0.2TiO3 – Y3Fe5O12 – YFeO3 composites

  • Yanyan Yang , Haibo Yang , Ying Lin and Miao Liu
Published/Copyright: May 8, 2014
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 105 Issue 5

Abstract

Ba0.8Sr0.2TiO3 – Y3Fe5O12 – YFeO3 (BST-YIG-YIP) composites were prepared via the in-situ growth solid-state method. The composites were obtained by sintering green bodies composed of Ba0.8Sr0.2TiO3 and Y3Fe5O12 powders at 1 350 °C. The phase composition and microstructure of the composites were analyzed. The dielectric and magnetic properties of the composites were also investigated. The results show that the as-prepared BST-YIG-YIP composites have large dielectric constants, high permeabilities and high saturation magnetizations.

Keywords: Composites; Dielectrics; Ferrite; Sintering
* Correspondence address, Professor Haibo Yang, School of Materials Science and Engineering, Shaanxi University of Science and Technology, Weiyang District, Xi'an 710021, Shaanxi Province, P. R. China, Tel.: +86 29 86168688, Fax: +86 29 86168688, E-mail:

References

[1] H.B.Yang, H.Wang, L.He, X.Yao: J. Phys. Chem. Solids73 (2012) 454. 10.1016/j.jpcs.2011.10.021Search in Google Scholar

[2] S.W.Phang, M.Tadokoro, J.Watanabe, N.Kuramoto: Polym. Adv. Technol.20 (2009) 550. 10.1002/pat.1381Search in Google Scholar

[3] L.P.Curecheriu, M.T.Buscaglia, V.Buscaglia, L.Mitoseriu, P.Postolache: J. Appl. Phys.107 (2010) 1041061. 10.1063/1.3340844Search in Google Scholar

[4] J.L.Chen, Z.Xu, S.B.Qu, X.Y.Wei, X.H.Liu: Ceram. Int.34 (2008) 803. 10.1016/j.ceramint.2006.07.009Search in Google Scholar

[5] H.B.Yang, H.Wang, F.Xiang, X.Yao: J. Am. Ceram. Soc.92 (2009) 2005. 10.1111/j.1551-2916.2008.02867.xSearch in Google Scholar

[6] H.B.Yang, H.Wang, L.He, L.Shui, X.Yao: J. Appl. Phys.108 (2010) 074105. 10.1063/1.3437650Search in Google Scholar

[7] Q.Q.Ke, X.J.Lou, Y.Wang, J.Wang: Phys. Rev. B82 (2010) 024102. 10.1103/PhysRevA.82.024102Search in Google Scholar

[8] H.Rikukawa: IEEE Trans. Magn.18 (1982) 1535. 10.1109/TMAG.1982.1062065Search in Google Scholar

[9] J.L.Snoek: Physica, Amsterdam University (1948).Search in Google Scholar

[10] X.P.Yuan, Y.K.Tang, Y.Sun, M.X.Xu: J. Appl. Phys.111 (2012) 05391. 10.1063/1.3670511Search in Google Scholar

Received: 2013-10-10
Accepted: 2014-01-28
Published Online: 2014-05-08
Published in Print: 2014-05-13

© 2014, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Review
  4. Research trends in microwave dielectrics and factors affecting their properties: A review
  5. Original Contributions
  6. Efficiency and work performance of TiNi alloy undergoing B2 ↔ R martensitic transformation
  7. Fabrication of Gasar made from Cu-24 wt.% Mn alloy
  8. Effect of intermediate frequency electromagnetic field on the solidification structure and mechanical properties of direct chill cast Al-8 wt.%Si alloy
  9. Effect of Ni-based conversion coating and Ni–P electroless plating on the bonding process of pure Al and AZ31 alloy
  10. Effect of ball milling time on the synthesis of nanocrystalline merwinite via mechanical activation and heat treatment
  11. Structural and magnetic properties of Fe–Al2O3 soft magnetic composites prepared using the sol–gel method
  12. Improved dielectric performance of barium strontium titanate multilayered capacitor by means of pulsed laser deposition and slow injection sol–gel methods
  13. Effect of heat treatment on the slurry erosion resistance of high strength steel DP980
  14. Development of biomimetic gelatin–chitosan/hydroxyapatite nanocomposite via double diffusion method for biomedical applications
  15. Short Communications
  16. Effects of rolling rate on microstructure and mechanical properties of Mg sheets
  17. Effect of post-weld heat treatment on dissimilar friction stir welded AA6063 and A319 aluminium alloys
  18. Dielectric and magnetic properties of Ba0.8Sr0.2TiO3 – Y3Fe5O12 – YFeO3 composites
  19. Microwave-assisted modulated synthesis of zirconium-based metal–organic framework (Zr-MOF) for hydrogen storage applications
  20. DGM News
  21. DGM News
https://doi.org/10.3139/146.111059
Keywords for this article
Composites; Dielectrics; Ferrite; Sintering

Articles in the same Issue

  1. Contents
  2. Contents
  3. Review
  4. Research trends in microwave dielectrics and factors affecting their properties: A review
  5. Original Contributions
  6. Efficiency and work performance of TiNi alloy undergoing B2 ↔ R martensitic transformation
  7. Fabrication of Gasar made from Cu-24 wt.% Mn alloy
  8. Effect of intermediate frequency electromagnetic field on the solidification structure and mechanical properties of direct chill cast Al-8 wt.%Si alloy
  9. Effect of Ni-based conversion coating and Ni–P electroless plating on the bonding process of pure Al and AZ31 alloy
  10. Effect of ball milling time on the synthesis of nanocrystalline merwinite via mechanical activation and heat treatment
  11. Structural and magnetic properties of Fe–Al2O3 soft magnetic composites prepared using the sol–gel method
  12. Improved dielectric performance of barium strontium titanate multilayered capacitor by means of pulsed laser deposition and slow injection sol–gel methods
  13. Effect of heat treatment on the slurry erosion resistance of high strength steel DP980
  14. Development of biomimetic gelatin–chitosan/hydroxyapatite nanocomposite via double diffusion method for biomedical applications
  15. Short Communications
  16. Effects of rolling rate on microstructure and mechanical properties of Mg sheets
  17. Effect of post-weld heat treatment on dissimilar friction stir welded AA6063 and A319 aluminium alloys
  18. Dielectric and magnetic properties of Ba0.8Sr0.2TiO3 – Y3Fe5O12 – YFeO3 composites
  19. Microwave-assisted modulated synthesis of zirconium-based metal–organic framework (Zr-MOF) for hydrogen storage applications
  20. DGM News
  21. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 7.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111059/html
Scroll to top button