Atomic group rotation mechanism of {1013} twinning in HCP materials
-
Shan Jiang
, Bin Zeng and Lyes Douadji
Abstract
In this paper the mechanism of {1013} twinning was studied through the application of the atomic group rotation model. The atomic displacement vectors of some selected atoms were calculated and the general formulas for calculating the displacement vectors of the twinning atoms were obtained; the atomic group rotation mechanism was then proposed. It was found that two types of alternately distributed atomic groups exist in {1013} twinning as in {1011} twinning. The atomic groups rotate by an angle of 6.3°, and a relative displacement magnitude of 0.539a is produced. The larger relative displacement magnitude produced during twinning may be the reason that {1013} twinning occurs more rarely than {1011} twinning.
References
[1] Y.N.Wang, J.C.Huang: Acta Mater.55 (2007) 897–905. 10.1016/j.actamat.2006.09.010Search in Google Scholar
[2] T.Al-Samman, G.Gottstein: Mat. Sci. Eng. A488 (2008) 406–414. 10.1016/j.msea.2007.11.056Search in Google Scholar
[3] L.Wu, A.Jain, D.W.Brown, G.M.Stoica, S.R.Agnew, B.Clausen, D.E.Fielden, P.K.Liaw: Acta Mater.56 (2008) 688–695. 10.1016/j.actamat.2007.07.057Search in Google Scholar
[4] M.R.Barnett: Mat. Sci. Eng. A464 (2007) 1–7. 10.1016/j.msea.2006.12.037Search in Google Scholar
[5] M.R.Barnett: Mat. Sci. Eng. A464 (2007) 8–16. 10.1016/j.msea.2006.12.037Search in Google Scholar
[6] M.Knezevic, A.Levinson, R.Harris, R.K.Mishra, R.D.Doherty, S.R.Kalidindi: Acta Mater.58 (2010) 6230–6242. 10.1016/j.actamat.2010.07.041Search in Google Scholar
[7] S.Jiang, T.M.Liu, L.W.Lu, W.Zeng, Z.C.Wang: Scripta Mater.62 (2010) 556–559. 10.1016/j.scriptamat.2009.12.038Search in Google Scholar
[8] S.Jiang, T.M.Liu, C.Chen, X.Q.Jiang: Mater. Trans.52 (2011) 1585–1588. 10.2320/matertrans.MC201022Search in Google Scholar
[9] J.W.Christian, S.Mahajant: Prog. Mater. Sci.39 (1995) 1–157. 10.1016/0079-6425(94)00007-7Search in Google Scholar
© 2014, Carl Hanser Verlag, München
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- Microstructure and residual stresses of laser remelted surfaces of a hot work tool steel
- Dynamic observation of twin evolution during austenite grain growth in an Fe–C–Mn–Si alloy
- Hot ductility behavior of Incoloy901 superalloy in the cast and wrought conditions
- The influence of aluminium intermediate layer in dissimilar friction welds
- Effect of TiO2 in aluminum matrix on workability behavior of powder metallurgy composites during cold upsetting
- Approach to evaluation of the overall strengthening and toughening effect of continuous fiber-reinforced ceramic matrix composites
- The effect of SiC/Al2O3 particles used during FSP on mechanical properties of AZ91 magnesium alloy
- Studies on salt fog corrosion behavior of friction stir welded AA7075–T651 aluminum alloy
- Evaluation of corrosion performance of two Mn-containing stainless steel alloys
- Carbothermal synthesis of β-SiC powders from silicon and SiO2-coated carbon powders
- Synthesis and application of TiO2 nanotubes in environmental pollutant removal
- Mechanical properties of polyvinyl alcohol sponge under different strain rates
- Short Communications
- Effects of Al2O3 phase composition on AlON powder synthesis via aluminothermic reduction and nitridation
- Atomic group rotation mechanism of {1013} twinning in HCP materials
- Self-propagation high-temperature sintering of the Ti–Al–C-diamond/BN system
- People
- The German Materials Society congratulates its long-time Managing Director Dr. Peter Paul Schepp on the occasion of his 65th birthday
- Dr. Margarethe Hofmann-Amtenbrink on her 65th birthday
- DGM News
- DGM News
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- Microstructure and residual stresses of laser remelted surfaces of a hot work tool steel
- Dynamic observation of twin evolution during austenite grain growth in an Fe–C–Mn–Si alloy
- Hot ductility behavior of Incoloy901 superalloy in the cast and wrought conditions
- The influence of aluminium intermediate layer in dissimilar friction welds
- Effect of TiO2 in aluminum matrix on workability behavior of powder metallurgy composites during cold upsetting
- Approach to evaluation of the overall strengthening and toughening effect of continuous fiber-reinforced ceramic matrix composites
- The effect of SiC/Al2O3 particles used during FSP on mechanical properties of AZ91 magnesium alloy
- Studies on salt fog corrosion behavior of friction stir welded AA7075–T651 aluminum alloy
- Evaluation of corrosion performance of two Mn-containing stainless steel alloys
- Carbothermal synthesis of β-SiC powders from silicon and SiO2-coated carbon powders
- Synthesis and application of TiO2 nanotubes in environmental pollutant removal
- Mechanical properties of polyvinyl alcohol sponge under different strain rates
- Short Communications
- Effects of Al2O3 phase composition on AlON powder synthesis via aluminothermic reduction and nitridation
- Atomic group rotation mechanism of {1013} twinning in HCP materials
- Self-propagation high-temperature sintering of the Ti–Al–C-diamond/BN system
- People
- The German Materials Society congratulates its long-time Managing Director Dr. Peter Paul Schepp on the occasion of his 65th birthday
- Dr. Margarethe Hofmann-Amtenbrink on her 65th birthday
- DGM News
- DGM News