Self-propagation high-temperature sintering of the Ti–Al–C-diamond/BN system
-
Baoyan Liang
Abstract
A mixture of Ti, Al, C, diamond, or c-BN powder was used as the raw material for the fabrication of a titanium aluminum carbide matrix-bonded diamond/c-BN composite using self-propagation high-temperature synthesis. The phase composition and microstructure of the reacted products were analyzed via X-ray diffraction and scanning electron microscopy. The addition of diamond did not inhibit the synthesis of titanium aluminum carbide in the sintered product. The diamond and this matrix exhibited good bonding. However, c-BN reacted with Ti and Al in the Ti–Al–C–BN system, which resulted in the formation of small amounts of titanium aluminum carbide. TiC, TiN, and Ti(C,N) matrix-bonded diamond/c-BN composites were obtained.
References
[1] H.Shimamaoka: Ind. Diamond Rev.42 (1982)155.10.2307/776549Search in Google Scholar
[2] K.Hans: J. Ceram. Soc. Japan93 (1985) 587.Search in Google Scholar
[3] Z.M.Sun: Int. Mater. Rev.56 (2011)143. 10.1179/1743280410Y.0000000001Search in Google Scholar
[4] M.W.Barsoum: Prog. Solid. State. Chem.28 (2000) 201. 10.1016/S0079-6786(00)00006-6Search in Google Scholar
[5] L.Jaworska, M.Szutkowska, J.Morgiel, L.Stobierski, J.Lis: J. Mater. Sci. Lett.20 (2001) 1783. 10.1023/A:1012535100330Search in Google Scholar
[6] L.Jaworska, M.Szutkowska, A.Twardowsk, D.Królick: J. Mater. Process Tech.162 (2005) 184. 10.1016/j.jmatprotec.2005.02.172Search in Google Scholar
[7] T.Rampai, C.I.Lang, I.Sigalas: Ceram. Inter.39 (2013) 4739. 10.1016/j.ceramint.2012.10.279Search in Google Scholar
[8] K.C.Patil, S.T.Aruna, S.Ekambaram: Curr. Opin. Solid. State Mater. Sci.2 (1997) 158. 10.1016/S1359-0286(97)80060-5Search in Google Scholar
[9] M.Ohyanagi, T.Yoshikawa, T.Yamamoto, M.Koizumi, S.Hosomi, E.A.Levashov, K.L.Padyukov, I.P.Borovinskaya: Adv. Mater.93 (1994) 685.Search in Google Scholar
[10] F.L.Zhang, Z.F.Yang, Y.M.Zhou, C.Y.Wang, H.P.Huang: Int. J. Refract. Met. H.29 (2011) 344. 10.1016/j.ijrmhm.2010.08.006Search in Google Scholar
[11] K.L.Padyukov, E.A.Levashov: Diam. Relat. Mater.2 (1993) 207. 10.1016/0925-9635(93)90054-6Search in Google Scholar
[12] Z.B.Ge, K.X.Chen, J.M.Guo, H.P.Zhou, J.M.FFerreira: J. Euro. Ceram. Soc.23 (2003) 567. 10.1016/S0955-2219(02)00098-5Search in Google Scholar
[13] C.L.Yeh, Y.G.Shen: J. All. Compd.470 (2009) 424. 10.1016/j.jallcom.2008.02.086Search in Google Scholar
© 2014, Carl Hanser Verlag, München
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- Microstructure and residual stresses of laser remelted surfaces of a hot work tool steel
- Dynamic observation of twin evolution during austenite grain growth in an Fe–C–Mn–Si alloy
- Hot ductility behavior of Incoloy901 superalloy in the cast and wrought conditions
- The influence of aluminium intermediate layer in dissimilar friction welds
- Effect of TiO2 in aluminum matrix on workability behavior of powder metallurgy composites during cold upsetting
- Approach to evaluation of the overall strengthening and toughening effect of continuous fiber-reinforced ceramic matrix composites
- The effect of SiC/Al2O3 particles used during FSP on mechanical properties of AZ91 magnesium alloy
- Studies on salt fog corrosion behavior of friction stir welded AA7075–T651 aluminum alloy
- Evaluation of corrosion performance of two Mn-containing stainless steel alloys
- Carbothermal synthesis of β-SiC powders from silicon and SiO2-coated carbon powders
- Synthesis and application of TiO2 nanotubes in environmental pollutant removal
- Mechanical properties of polyvinyl alcohol sponge under different strain rates
- Short Communications
- Effects of Al2O3 phase composition on AlON powder synthesis via aluminothermic reduction and nitridation
- Atomic group rotation mechanism of {1013} twinning in HCP materials
- Self-propagation high-temperature sintering of the Ti–Al–C-diamond/BN system
- People
- The German Materials Society congratulates its long-time Managing Director Dr. Peter Paul Schepp on the occasion of his 65th birthday
- Dr. Margarethe Hofmann-Amtenbrink on her 65th birthday
- DGM News
- DGM News
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- Microstructure and residual stresses of laser remelted surfaces of a hot work tool steel
- Dynamic observation of twin evolution during austenite grain growth in an Fe–C–Mn–Si alloy
- Hot ductility behavior of Incoloy901 superalloy in the cast and wrought conditions
- The influence of aluminium intermediate layer in dissimilar friction welds
- Effect of TiO2 in aluminum matrix on workability behavior of powder metallurgy composites during cold upsetting
- Approach to evaluation of the overall strengthening and toughening effect of continuous fiber-reinforced ceramic matrix composites
- The effect of SiC/Al2O3 particles used during FSP on mechanical properties of AZ91 magnesium alloy
- Studies on salt fog corrosion behavior of friction stir welded AA7075–T651 aluminum alloy
- Evaluation of corrosion performance of two Mn-containing stainless steel alloys
- Carbothermal synthesis of β-SiC powders from silicon and SiO2-coated carbon powders
- Synthesis and application of TiO2 nanotubes in environmental pollutant removal
- Mechanical properties of polyvinyl alcohol sponge under different strain rates
- Short Communications
- Effects of Al2O3 phase composition on AlON powder synthesis via aluminothermic reduction and nitridation
- Atomic group rotation mechanism of {1013} twinning in HCP materials
- Self-propagation high-temperature sintering of the Ti–Al–C-diamond/BN system
- People
- The German Materials Society congratulates its long-time Managing Director Dr. Peter Paul Schepp on the occasion of his 65th birthday
- Dr. Margarethe Hofmann-Amtenbrink on her 65th birthday
- DGM News
- DGM News
