DGM News

Artikel in diesem Heft

1. Contents
2. Contents
3. Original Contributions
4. Microstructure and residual stresses of laser remelted surfaces of a hot work tool steel
5. Dynamic observation of twin evolution during austenite grain growth in an Fe–C–Mn–Si alloy
6. Hot ductility behavior of Incoloy901 superalloy in the cast and wrought conditions
7. The influence of aluminium intermediate layer in dissimilar friction welds
8. Effect of TiO₂ in aluminum matrix on workability behavior of powder metallurgy composites during cold upsetting
9. Approach to evaluation of the overall strengthening and toughening effect of continuous fiber-reinforced ceramic matrix composites
10. The effect of SiC/Al₂O₃ particles used during FSP on mechanical properties of AZ91 magnesium alloy
11. Studies on salt fog corrosion behavior of friction stir welded AA7075–T651 aluminum alloy
12. Evaluation of corrosion performance of two Mn-containing stainless steel alloys
13. Carbothermal synthesis of β-SiC powders from silicon and SiO₂-coated carbon powders
14. Synthesis and application of TiO₂ nanotubes in environmental pollutant removal
15. Mechanical properties of polyvinyl alcohol sponge under different strain rates
16. Short Communications
17. Effects of Al₂O₃ phase composition on AlON powder synthesis via aluminothermic reduction and nitridation
18. Atomic group rotation mechanism of {1013} twinning in HCP materials
19. Self-propagation high-temperature sintering of the Ti–Al–C-diamond/BN system
20. People
21. The German Materials Society congratulates its long-time Managing Director Dr. Peter Paul Schepp on the occasion of his 65^th birthday
22. Dr. Margarethe Hofmann-Amtenbrink on her 65^th birthday
23. DGM News
24. DGM News