Startseite Solubility of nitrogen in ferrite; the Fe–N phase diagram
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Solubility of nitrogen in ferrite; the Fe–N phase diagram

  • Jendrik Stein , Ralf Erich Schacherl , Minsu Jung , Sairamudu Meka , Bastian Rheingans und Eric Jan Mittemeijer
Veröffentlicht/Copyright: 5. November 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 104 Heft 11

Abstract

To accurately define important phase boundaries in the iron–nitrogen (temperature–composition) phase diagram as well as the (temperature–potential) Lehrer diagram, the solubility of nitrogen in ferrite was determined as a function of the nitriding potential (which defines the chemical potential of nitrogen) and the temperature. To this end, thin iron foils were homogeneously nitrided in flowing gas mixtures composed of ammonia and hydrogen. Phase identification was performed by means of X-ray diffraction analysis. Further, from the data obtained, the absorption function and the enthalpy for dissolution of nitrogen into ferrite and the enthalpy of the reaction occurring at the α/(α + γ′)-phase boundary were determined. The data obtained were corrected for the occurrence of a stationary state instead of a local equilibrium at the surface of the specimens. It followed that parts of the phase boundaries in the Lehrer diagram do not represent equilibrium states but rather stationary states.

Keywords: Nitrogen solubility; Lehrer diagram; Fe–N phase diagram; Local equilibrium; Stationary state
* Correspondence address, Dr. Ralf Erich Schacherl, Institute for Materials ScienceUniversity of Stuttgart, Heisenbergstr. 3, 70569 Stuttgart, Germany, Tel.: + 49711689-3314, Fax: + 49711689-3312, E-mail:

References

[1] E.J.Mittemeijer: Fundamentals of Materials Science, Springer-Verlag, Berlin-Heidelberg (2010). PMid: 21328479Suche in Google Scholar

[2] S.Lampman: Introduction to Surface Hardening of Steel, ASM Handbook Vol 4, Heat Treating, Metals Park, Ohio, ASM International4 (1997) 259.Suche in Google Scholar

[3] T.B.Massalski, H.Okamoto: Binary Alloy Phase Diagrams, ASM International, USA (1990).Suche in Google Scholar

[4] Lehrer, E: Z. Elektrochem. Angew. P.36 (1930) 383.Suche in Google Scholar

[5] E.J.Mittemeijer, J.T.Slycke: Surf. Eng.12 (1996) 152.Suche in Google Scholar

[6] E.J.Mittemeijer, M.A.J.Somers: Surf. Eng.13 (1997) 483; see also: M.A.J. Somers, B.J. Kooi, L. Maldzinski, E.J. Mittemeijer, A.A. van der Horst, A.M. van der Kraan, N.M. van der Pers: Acta Mater. 45 (1997) 2013.Suche in Google Scholar

[7] D.R.Gaskell: Introduction to the Thermodynamics of Materials, Taylor & Francis Inc. (2008).Suche in Google Scholar

[8] M.Fonovic, A.Leineweber, E.J.Mittemerijer: submitted for publication.Suche in Google Scholar

[9] H.J.Grabke: Berich. Bunsen Gesell., 72 (1968) 533.Suche in Google Scholar

[10] H.J.Grabke: Berich. Bunsen Gesell., 72 (1968) 541.Suche in Google Scholar

[11] H.J.Grabke: Arch. Eisenhuettenwes., 46 (1975) 75.Suche in Google Scholar

[12] H.J.Grabke: Z. Phys. Chem. Neue Fol., 100 (1976) 185. 10.1524/zpch.1976.100.3-6.185Suche in Google Scholar

[13] M.Nikolussi, A.Leineweber, E.J.Mittemeijer: Acta Mater.56 (2008) 5837. 10.1016/j.actamat.2008.08.001Suche in Google Scholar

[14] J.D.Fast, M.B.Verrijp: J. Iron Steel Inst., 176 (1954) 24.Suche in Google Scholar

[15] A.F.Guillermet, H.Du: Z. Metallkd., 85 (1994) 154.Suche in Google Scholar

[16] E.H.Du Marchie van Voorthuysen, N.C.Chechenin, D.O.Boerma: Metall. Mater. Trans. A33 (2002) 2593–2598. 10.1007/s11661-002-0380-2Suche in Google Scholar

[17] H.H.Podgurski, H.E.Knechtel: Trans. Am. Inst. Min. Met. Eng., 245 (1969) 1595.Suche in Google Scholar

[18] Z.Przylecki, L.Maldzinski: in Proc. 4th Int. Conf.: Politechnika Poznanska. (1987) 153.Suche in Google Scholar

[19] H.A.Wriedt, L.S.Darken, R.P.Smith: unpublished results (1964), as cited in Ref. [21].Suche in Google Scholar

[20] B.J.Kooi, M.A.J.Somers, E.J.Mittemeijer: Metall. Mater. Trans. A27 (1996) 1063. 10.1007/BF02649774Suche in Google Scholar

[21] H.A.Wriedt, N.A.Gokcen, R.H.Nafzinger: Bulletin of Alloy Phase Diagrams, 8 (1987) 355. 10.1007/BF02869273Suche in Google Scholar

[22] J.Kunze: Nitrogen and Carbon in Iron and Steel Thermodynamics, Physical Research Vol. 16, Akademie-Verlag, Berlin (1990). PMid: 2316057Suche in Google Scholar

[23] V.G.Paranjpe, M.Cohen, M.B.Bever, C.F.Floe: Trans. Am. Inst. Min. Met. Eng., 188 (1950) 261.Suche in Google Scholar

[24] N.S.Corney, E.T.Turkdogan: J. Iron Steel Inst., 180 (1955) 344.Suche in Google Scholar

[25] L.J.Dijkstra: Trans. Am. Inst. Min. Met. Eng., 185 (1949) 252.Suche in Google Scholar

[26] M.Nacken, J.Rahmann: Arch. Eisenhuettenwes., 33 (1962) 131.Suche in Google Scholar

[27] K.Abiko, Y.Imai: Trans. Jpn. Inst. Met, 18 (1977) 113.10.2320/matertrans1960.18.113Suche in Google Scholar

[28] W.Pitsch, E.Houdremont: Arch. Eisenhuettenwes.27 (1956) 281.Suche in Google Scholar

[29] A.Burdese: La Metallurgia Italiana, 8 (1955) 357.Suche in Google Scholar

[30] R.Rawlings, D.Tambini: J. Iron Steel Inst., 184 (1956) 302.Suche in Google Scholar

[31] H.U.Åström, G.Borelius: Acta Metall., 2 (1954) 547. 10.1016/0001-6160(54)90076-0Suche in Google Scholar

[32] G.Collette, C.Roederer, C.Crussard: Mem. Sci. Rev. Met., 58 (1961) 61.Suche in Google Scholar

[33] Y.Imai, T.Masumoto, M.Sakamoto: Sci. Rep. Res. Tohoku A, 20 (1968) 1.Suche in Google Scholar

[34] H.C.F.Rozendaal, E.J.Mittemeijer, P.F.Colijn, P.J.Vanderschaaf: Metall. Trans. A14 (1983) 395. 10.1007/BF02644217Suche in Google Scholar

[35] P.B.Friehling, F.W.Poulsen, M.A.J.Somers: Z. Metallkd., 92 (2001) 589.Suche in Google Scholar

Received: 2013-03-25
Accepted: 2013-06-17
Published Online: 2013-11-05
Published in Print: 2013-11-14

© 2013, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Solubility of nitrogen in ferrite; the Fe–N phase diagram
  5. The Li–C phase equilibria
  6. Experimental study of phase equilibria in the “SnO”–SiO2–“FeO” system at silica saturation, and fixed oxygen partial pressures at 1473 K
  7. The evolution of Y distribution during the processing route of mechanically alloyed iron studied by means of atom probe tomography
  8. Oscillative surface morphology in peritectic NiAl using phase-field modeling
  9. Microstructural characterisation of oxide layer developed by sulphuric anodisation on 2017A alloys
  10. Wear and corrosion behaviour of AISI 310 and AISI 316 stainless steels in synthetic mine water
  11. Superplasticity of coarse-grained Ti-13V-11Cr-3Al alloy
  12. Research on the creep fracture mechanism of FGH95 Ni-based superalloy
  13. Hot pressing of Al2O3 matrix ceramic materials improved by diopside additive
  14. Tungsten heavy alloy as a filler metal for repair welding of dies for high pressure die casting
  15. A one-pot synthesis of Ag/α-Fe2O3 nanoplates with gelatin and their photocatalytic activity
  16. Short Communications
  17. Effects of coating solution concentration on the interlaminar shear strength of carbon fiber/epoxy/nano-CaCO3 composites
  18. People
  19. Dr.-Ing. Christa Blank
  20. DGM News
  21. DGM News
https://doi.org/10.3139/146.110968
Schlagwörter für diesen Artikel
Nitrogen solubility; Lehrer diagram; Fe–N phase diagram; Local equilibrium; Stationary state

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Solubility of nitrogen in ferrite; the Fe–N phase diagram
  5. The Li–C phase equilibria
  6. Experimental study of phase equilibria in the “SnO”–SiO2–“FeO” system at silica saturation, and fixed oxygen partial pressures at 1473 K
  7. The evolution of Y distribution during the processing route of mechanically alloyed iron studied by means of atom probe tomography
  8. Oscillative surface morphology in peritectic NiAl using phase-field modeling
  9. Microstructural characterisation of oxide layer developed by sulphuric anodisation on 2017A alloys
  10. Wear and corrosion behaviour of AISI 310 and AISI 316 stainless steels in synthetic mine water
  11. Superplasticity of coarse-grained Ti-13V-11Cr-3Al alloy
  12. Research on the creep fracture mechanism of FGH95 Ni-based superalloy
  13. Hot pressing of Al2O3 matrix ceramic materials improved by diopside additive
  14. Tungsten heavy alloy as a filler metal for repair welding of dies for high pressure die casting
  15. A one-pot synthesis of Ag/α-Fe2O3 nanoplates with gelatin and their photocatalytic activity
  16. Short Communications
  17. Effects of coating solution concentration on the interlaminar shear strength of carbon fiber/epoxy/nano-CaCO3 composites
  18. People
  19. Dr.-Ing. Christa Blank
  20. DGM News
  21. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 30.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110968/html?lang=de
Button zum nach oben scrollen