Contents

Artikel in diesem Heft

1. Contents
2. Contents
3. Original Contributions
4. Solubility of nitrogen in ferrite; the Fe–N phase diagram
5. The Li–C phase equilibria
6. Experimental study of phase equilibria in the “SnO”–SiO₂–“FeO” system at silica saturation, and fixed oxygen partial pressures at 1473 K
7. The evolution of Y distribution during the processing route of mechanically alloyed iron studied by means of atom probe tomography
8. Oscillative surface morphology in peritectic NiAl using phase-field modeling
9. Microstructural characterisation of oxide layer developed by sulphuric anodisation on 2017A alloys
10. Wear and corrosion behaviour of AISI 310 and AISI 316 stainless steels in synthetic mine water
11. Superplasticity of coarse-grained Ti-13V-11Cr-3Al alloy
12. Research on the creep fracture mechanism of FGH95 Ni-based superalloy
13. Hot pressing of Al₂O₃ matrix ceramic materials improved by diopside additive
14. Tungsten heavy alloy as a filler metal for repair welding of dies for high pressure die casting
15. A one-pot synthesis of Ag/α-Fe₂O₃ nanoplates with gelatin and their photocatalytic activity
16. Short Communications
17. Effects of coating solution concentration on the interlaminar shear strength of carbon fiber/epoxy/nano-CaCO₃ composites
18. People
19. Dr.-Ing. Christa Blank
20. DGM News
21. DGM News