Startseite First and second differentials of the ultrasonic parameter as an effective tool to identify phase transitions in R1-xAxMnO3 perovskites
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

First and second differentials of the ultrasonic parameter as an effective tool to identify phase transitions in R1-xAxMnO3 perovskites

  • Singer Muthu Kumaran und Venkatachalam Rajendran
Veröffentlicht/Copyright: 31. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 103 Heft 12

Abstract

In order to examine the existence of different phase transitions, the ultrasonic longitudinal modulus (L) and its first (ΔL/ΔT) and second (Δ2L/Δ2T) differentials have been established for two different perovskite manganites over a wide range of temperatures, La0.67Sr0.33MnO3 from 460 to 300 K and Nd0.67Sr0.33MnO3 300 to 150 K. The anomalies in L and its differentials at TC (≈378 K) in La0.67Sr0.33MnO3 are due to the ferromagnetic metal transition; the changes at TC (≈234 K), TCO (≈194 K) in Nd0.67Sr0.33MnO3 represent the ferromagnetic transition and charge ordering transition respectively. The existing phase transitions are due to a strong electron-phonon interaction arising from the Jahn-Teller effect and spin-phonon interaction from the linear magnetostriction effect. The first (ΔL/ΔT) and second (Δ2L/Δ2T) differentials of L are identified as an effective approach for the clear identification/detection of different phase transitions in the above systems over a wide range of temperatures.

Keywords: Ultrasonic parameters; Phase transitions; R1-xAxMnO3 perovskites
* Correspondence address, Singer Muthu Kumaran, Assistant Professor, Department of Physics, H.H. The Rajah's College, Pudukkottai, Tamilnadu, India. Tel.: +91-04322-221558, Fax: +91-04322-230490, E-mail:

References

[1] R.von Helmolt, J.Wecker, B.Holzapfel, L.Shultz, K.Samwer: Phys. Rev. Lett.71 (1993) 2331. 10.1103/PhysRevLett.71.2331Suche in Google Scholar

[2] R.A.Rao, D.Lavric, T.K.Nath, C.B.Eom, L.Wu, F.Tsui: Appl. Phys. Lett.73 (1998) 3294. 10.1063/1.122749Suche in Google Scholar

[3] A.J.Millis, P.B.Littlewood, B.I.Shraiman: Phys. Rev. Lett.74 (1995) 5144. 10.1103/PhysRevLett.74.5144Suche in Google Scholar

[4] C.Zener: Phys. Rev.82 (1951) 403. 10.1103/PhysRev.82.403Suche in Google Scholar

[5] V.Rajendran, S.Muthukumaran, V.Sivasubramanian, T.Jayakumar, B.Raj: Phys. Stat. Solidi (a)195 (2003) 350. 10.1002/pssa.200305931Suche in Google Scholar

[6] V.Rajendran, S.Muthukumaran, V.Sivasubramanian, T.Jayakumar, B.Raj: PhysicaB336 (2003) 261. 10.1016/S0921-4526(03)00256-4Suche in Google Scholar

[7] S.Muthukumaran, N.Priyadharsini, V.Rajendran, T.Jayakumar, P.Palanichamy, P.Shankar, BaldevRaj: Mater. Sci. Eng.A435–436 (2006) 29.Suche in Google Scholar

[8] J.Philip, N.Rodrigues, M.Sadhukhan, A.K.Bera, B.K.Chaudhuri: J. Mater. Sci.35 (2000) 229. 10.1023/A:1004785809370Suche in Google Scholar

[9] D.S.Dessau, Z.-X.Shen, in: Colossal Magnetoresistive Oxides, Y.Tokura (Ed.), Monographs in Condensed Materials Science, Gorden & Breach, New York, London, (1998).Suche in Google Scholar

[10] ChangfeiZhu, RenkuiZheng: Phys. Rev.B59 (1999) 11169. 10.1103/PhysRevB.59.11169Suche in Google Scholar

[11] PengChen, Yu-WeiDu: Chinese J. Phys.39 (2001) 357.Suche in Google Scholar

[12] R.D.Shannon, Acta Cryst: A32 (1976) 751. 10.1107/S0567739476001551Suche in Google Scholar

[13] J.Fontcuberta, V.Laukhin, X.Obradors: Phys. Rev.B60 (1999) 6266. 10.1103/PhysRevB.60.6266Suche in Google Scholar

[14] H.S.Bennet, E.Pytte: Phys. Rev.155 (1967) 553. 10.1103/PhysRev.155.553Suche in Google Scholar

Received: 2011-7-2
Accepted: 2012-6-12
Published Online: 2013-05-31
Published in Print: 2012-12-01

© 2012, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Effect of texture on grain growth in an interstitial-free steel sheet
  5. Nanoindentation of pseudoelastic NiTi containing Ni4Ti3 precipitates
  6. Isochronal annealing of a deformed Fe-7.5 mass.% Si-steel
  7. Modelling of three powder compaction laws for cold die pressing
  8. Surface tension and density of liquid Sn–Ag–Cu alloys
  9. Thermodynamics of liquid Au–Sb–Sn
  10. Phase relations in the ZrO2-Sm2O3-Y2O3-Al2O3 system: experimental investigation and thermodynamic modelling
  11. Contributions of phase composition and defect structure to the long term stability of Li/MgO catalysts
  12. First and second differentials of the ultrasonic parameter as an effective tool to identify phase transitions in R1-xAxMnO3 perovskites
  13. Surface oxide layer formation on Au-Pt-Pd-Si alloys for dental resin restorations
  14. On the high temperature stability of γ-Al2O3/Ti0.33Al0.67N coated WC–Co cutting inserts
  15. Optimizing composition for (Nd, Pr)–Nb–Fe–B hard magnetic nanocomposites
  16. Simple ionic-liquid assisted method for preparation of Cd1-xZnxS nanoparticles with improved photocatalytic activity
  17. A low-cost route for synthesizing tungsten disulfide film composites from abundant sprayed oxides: Technique and characterization
  18. Anodic behavior of Al–Zn–In sacrificial anodes at different concentration of zinc and indium
  19. Short Communications
  20. Effect of molybdenum addition on fracture toughness and hardness of Fe2B in Fe–B–C cast alloy
  21. DGM News
  22. DGM News
https://doi.org/10.3139/146.110811
Schlagwörter für diesen Artikel
Ultrasonic parameters; Phase transitions; R1-xAxMnO3 perovskites

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Effect of texture on grain growth in an interstitial-free steel sheet
  5. Nanoindentation of pseudoelastic NiTi containing Ni4Ti3 precipitates
  6. Isochronal annealing of a deformed Fe-7.5 mass.% Si-steel
  7. Modelling of three powder compaction laws for cold die pressing
  8. Surface tension and density of liquid Sn–Ag–Cu alloys
  9. Thermodynamics of liquid Au–Sb–Sn
  10. Phase relations in the ZrO2-Sm2O3-Y2O3-Al2O3 system: experimental investigation and thermodynamic modelling
  11. Contributions of phase composition and defect structure to the long term stability of Li/MgO catalysts
  12. First and second differentials of the ultrasonic parameter as an effective tool to identify phase transitions in R1-xAxMnO3 perovskites
  13. Surface oxide layer formation on Au-Pt-Pd-Si alloys for dental resin restorations
  14. On the high temperature stability of γ-Al2O3/Ti0.33Al0.67N coated WC–Co cutting inserts
  15. Optimizing composition for (Nd, Pr)–Nb–Fe–B hard magnetic nanocomposites
  16. Simple ionic-liquid assisted method for preparation of Cd1-xZnxS nanoparticles with improved photocatalytic activity
  17. A low-cost route for synthesizing tungsten disulfide film composites from abundant sprayed oxides: Technique and characterization
  18. Anodic behavior of Al–Zn–In sacrificial anodes at different concentration of zinc and indium
  19. Short Communications
  20. Effect of molybdenum addition on fracture toughness and hardness of Fe2B in Fe–B–C cast alloy
  21. DGM News
  22. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 16.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110811/html?lang=de
Button zum nach oben scrollen