Home Technology Effect of sand blasting on structural, thermal, and mechanical properties of Zr58.3Cu18.8Al14.6Ni8.3 bulk metallic glass
Article
Licensed
Unlicensed Requires Authentication

Effect of sand blasting on structural, thermal, and mechanical properties of Zr58.3Cu18.8Al14.6Ni8.3 bulk metallic glass

  • Naeem ul Haq Tariq , Hasan Bin Awais , Javaid Iqbal Akhter , Muhammad Naeem and Rub Nawaz Shahid
Published/Copyright: June 11, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 103 Issue 7

Abstract

In the present work sand-blasting-induced structural, thermal, and mechanical effects were studied in Zr58.3Cu18.8Al14.6Ni8.3 bulk metallic glass. It was observed that sand blasting favors disordering of the atomic configuration, formation of free volume and evolution of multiple intersecting shear bands. As a result, considerable compressive plasticity was achieved in sand-blasted samples. It was also observed that in order to superimpose the effect of pre-straining and extra free volume for improving compressive plasticity, there exists a limit to both parameters.

Keywords: Bulk metallic glass; X-ray diffraction; Shear bands; Thermal analysis; Mechanical properties; Scanning electron microscopy
* Correspondence address Naeem ul Haq Tariq Department of Metallurgy and Materials EngineeringPakistan Institute of Engineering and Applied SciencesP.O. Nilore, Islamabad, Pakistan Tel.: + 9251220738182 Fax: +92512208070 E-mail:

References

[1] S.Ranganathan: Current Science85 (2003) 1404.Search in Google Scholar

[2] M.Telford: Materials Today (2004) 36. 10.1016/S1369-7021(04)00124-5Search in Google Scholar

[3] W.H.Wang, C.Dong, C.H.Shek: Mater. Sci. Eng. R44 (2004) 45. 10.1016/j.mser.2004.03.001Search in Google Scholar

[4] C.J.Byrne, M.Eldrup: Science321 (2008) 502. 10.1126/science.1158864Search in Google Scholar

[5] W.L.Johnson: MRS Bull.24 (1999) 42.10.1557/S0883769400053252Search in Google Scholar

[6] A.Inoue, A.Takeuchi: Mater. Sci. Eng. A375–377 (2004) 16. 10.1016/j.msea.2003.10.159Search in Google Scholar

[7] A.Inoue: Acta Mater.48 (2000) 279. 10.1016/S1359-6454(99)00300-6Search in Google Scholar

[8] A.I.Saliman, M.F.Ashby, Y.Bréchet, A.L.Greer: Mater. Sci. Eng. A375–377 (2004) 385. 10.1016/j.msea.2003.10.167Search in Google Scholar

[9] A.Leonhard, L.Q.Xing, M.Heilmaier, A.Gebert, J.Eckert, L.Schultz: Nanostruct. Mater.10 (1998) 805. 10.1016/S0965-9773(98)00117-2Search in Google Scholar

[10] J.Schroers, B.Lohwongwatana, W.L.Johnson, A.Peker: Mater. Sci. Eng. A449–451 (2007) 235. 10.1016/j.msea.2006.02.301Search in Google Scholar

[11] C.T.Liu, L.Healtherly, D.S.Easton, C.A.Carmichael, J.H.Schneibel, C.H.Chen, J.L.Wright, M.H.Yoo, J.A.Horton, A.Inoue: Metall. Mater. Trans. A29 (1998) 1811. 10.1007/s11661-998-0004-6Search in Google Scholar

[12] A.Leonhard, M.Heilmaier, J.Eckert, L.Schultz: Mater. Res. Soc. Symp. Proc.554 (1999) 137.Search in Google Scholar

[13] T.C.Hufnagel, P.El-Deiry, R.P.Vinci: Scripta Mater.43 (2000) 1071. 10.1016/S1359-6462(00)00527-3Search in Google Scholar

[14] A.R.Yavari, J.J.Lewandowski, J.Eckert: MRS Bull.32 (2007) 635. 10.1557/mrs2007.125Search in Google Scholar

[15] X.Hui, S.N.Liu, S.J.Pang, L.C.Zhuo, T.Zhang, G.L.Chen, Z.K.Liu: Scripta Mater.63 (2010) 239. 10.1016/j.scriptamat.2010.03.065Search in Google Scholar

[16] N.H.Tariq, B.A.Hassan, J.I.Akhter, F.Ali: J. Alloys Compd.469 (2009) 179. 10.1016/j.jallcom.2008.02.002Search in Google Scholar

[17] S.H.Xie, X.R.Zeng, H.X.Qian: J. Alloys Compd.480 (2009) L37. 10.1016/j.jallcom.2009.02.075Search in Google Scholar

[18] D.H.Bae, S.W.Lee, J.W.Kwon, X.D.Wang, S.Yi: Mater. Sci. Eng. A449–451 (2007) 111. 10.1016/j.msea.2006.02.235Search in Google Scholar

[19] J.Eckert, J.Das, K.B.Kim, F.Baier, M.B.Tang, W.H.Wang, Z.F.Zhang: Intermetallics14 (2006) 876. 10.1016/j.intermet.2006.01.003Search in Google Scholar

[20] J.Schroers, W.L.Johnson: Phys. Rev. Lett.93 (2004) 255506. 10.1103/PhysRevLett.93.255506Search in Google Scholar PubMed

[21] Y.H.Li, W.Zhang, C.Dong, J.B.Qiang, K.Yubuta, A.Makino, A.Inoue: J. Alloys Compd.504 (2010) S2. 10.1016/j.jallcom.2010.02.069Search in Google Scholar

[22] C.Fan, C.Li, A.Inoue, V.Haas: Phys. Rev. B61 (2000) R3761. 10.1103/PhysRevB.61.R3761Search in Google Scholar

[23] C.C.Hays, C.P.Kim, W.L.Johnson: Phys. Rev. Lett.84 (2000) 2901. PMid: 11018971; 10.1103/PhysRevLett.84.2901Search in Google Scholar

[24] C.Fan, A.Inoue: Appl. Phys. Lett.77 (2000) 46. 10.1063/1.126872Search in Google Scholar

[25] S.F.Guo, L.Liu, N.Li, Y.Li: Scripta Mater.62 (2010) 329. 10.1016/j.scriptamat.2009.10.024Search in Google Scholar

[26] M.Heilmaier: J. Mater. Proces. Tech.117 (2001) 374. 10.1016/S0924-0136(01)00782-8Search in Google Scholar

[27] X.D.Hui, H.C.Kou, J.P.He, Y.L.Wang, W.Dong, G.L.Chen: Intermetallics, 10 (2002) 1065. 10.1016/S0966-9795(02)00145-0Search in Google Scholar

[28] F.Jiang, D.H.Zhang, L.C.Zhang, Z.B.Zhang, L.He, J.Sun, Z.F.Zhang: Mater. Sci. Eng. A467 (2007) 139. 10.1016/j.msea.2007.02.093Search in Google Scholar

[29] H.T.Zong, M.Z.Ma, L.Liu, X.Y.Zhang, B.W.Bai, P.F.Yu, L.Qi, P.Jing, G.Li, R.P.Liu: J. Alloys Compd.504 (2010) S106. 10.1016/j.jallcom.2010.02.045Search in Google Scholar

[30] U.Kuhn, J.Eckert, N.Mattern, L.Schultz: Appl. Phys. Lett.80 (2002) 2478. 10.1063/1.1467707Search in Google Scholar

[31] H.Choi-Yim, W.L.Johnson: Appl. Phys. Lett.71 (1997) 3808. 10.1063/1.120512Search in Google Scholar

[32] S.B.Biner: Acta Mater.54 (2006) 139. 10.1016/j.actamat.2005.08.043Search in Google Scholar

[33] Y.Zhang, W. H.Wang, A.L.Greer: Nat. Mater.5 (2006) 857. 10.1038/nmat1758Search in Google Scholar

[34] S.E.Dang, G.Zhang, Z.Y.Li, Z.J.Yan, Y.T.Li, W.Liang: J. Alloys Compd.479 (2009) L15. 10.1016/j.jallcom.2008.12.056Search in Google Scholar

[35] M.H.Lee, J.Das, K.S.Lee, U.Kuhn, J.Eckert: Intermetallics18 (2010) 1902. 10.1016/j.intermet.2010.02.031Search in Google Scholar

[36] B.S.S.Daniel, A.Reger-Leonhard, M.Heilmaier, J.Eckert, L.Schultz: Mechanics Time-Dependent Materials6 (2002) 193. 10.1023/A:1015045324786Search in Google Scholar

[37] A.Van den Beukel, J.Sietsma: Acta Metall.38 (1990) 383. 10.1016/0956-7151(90)90142-4Search in Google Scholar

[38] Z.J.Yan, J.Yan, L.F.Tuo, Y.Hu, S.E.Dang: J. Alloys Compd.504 (2010) S251. 10.1016/j.jallcom.2010.04.130Search in Google Scholar

[39] N.H.Tariq, M.Naeem, J.I.Akhter, B.A.Hasan: Mater. Chem. Phys.126 (2010) 207. 10.1016/j.matchemphys.2010.11.038Search in Google Scholar

Received: 2011-1-17
Accepted: 2011-11-24
Published Online: 2013-06-11
Published in Print: 2012-07-01

© 2012, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Diffusivities and atomic mobilities in Cu-rich fcc Al–Cu–Mn alloys
  5. Phase transformations in non-isothermally annealed as-cast and cold-rolled AlMnScZr alloys
  6. High-temperature deformation behavior and thermal properties of an Ni30Co17Fe53 alloy
  7. Microstructural and mechanical properties of dual-phase steels welded using GMAW with solid and flux-cored welding wires
  8. Microstructure – wear performance relationship of hypoeutectic 15% Cr-2% Mo white iron
  9. The enhancement of wear properties of squeeze-cast A356 composites reinforced with B4C particulates
  10. Phase diagram of the Al–Dy–Zr ternary system at 773 K
  11. Calorimetric investigations of liquid gold–antimony–tin alloys
  12. Combustion synthesis and characterization of bulk nanostructured Ni50Al17Fe33 alloy
  13. Effect of sand blasting on structural, thermal, and mechanical properties of Zr58.3Cu18.8Al14.6Ni8.3 bulk metallic glass
  14. Studies of dynamic mass transfer at the slag–metal interface – Interfacial velocity measurements
  15. Structural and optical investigation of gadolinia-doped ceria powders prepared by polymer complex solution method
  16. Adsorption of bovine serum albumin onto titanium dioxide nanotube arrays
  17. CNT-based displacement sensor
  18. Non-covalent assembly of hybrid nanostructures of gold and palladium nanoparticles with carbon nanotubes
  19. Effect of solid content on performance of conductive silver paste for crystalline silicon solar cells
  20. Effect of inhomogeneous size and shape of graphite particles on the in-plane electrical conductivity of PP/G/CB composites
  21. The durability of fired brick incorporating textile factory waste ash and basaltic pumice
  22. DGM News
  23. DGM News
https://doi.org/10.3139/146.110691
Keywords for this article
Bulk metallic glass; X-ray diffraction; Shear bands; Thermal analysis; Mechanical properties; Scanning electron microscopy

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Diffusivities and atomic mobilities in Cu-rich fcc Al–Cu–Mn alloys
  5. Phase transformations in non-isothermally annealed as-cast and cold-rolled AlMnScZr alloys
  6. High-temperature deformation behavior and thermal properties of an Ni30Co17Fe53 alloy
  7. Microstructural and mechanical properties of dual-phase steels welded using GMAW with solid and flux-cored welding wires
  8. Microstructure – wear performance relationship of hypoeutectic 15% Cr-2% Mo white iron
  9. The enhancement of wear properties of squeeze-cast A356 composites reinforced with B4C particulates
  10. Phase diagram of the Al–Dy–Zr ternary system at 773 K
  11. Calorimetric investigations of liquid gold–antimony–tin alloys
  12. Combustion synthesis and characterization of bulk nanostructured Ni50Al17Fe33 alloy
  13. Effect of sand blasting on structural, thermal, and mechanical properties of Zr58.3Cu18.8Al14.6Ni8.3 bulk metallic glass
  14. Studies of dynamic mass transfer at the slag–metal interface – Interfacial velocity measurements
  15. Structural and optical investigation of gadolinia-doped ceria powders prepared by polymer complex solution method
  16. Adsorption of bovine serum albumin onto titanium dioxide nanotube arrays
  17. CNT-based displacement sensor
  18. Non-covalent assembly of hybrid nanostructures of gold and palladium nanoparticles with carbon nanotubes
  19. Effect of solid content on performance of conductive silver paste for crystalline silicon solar cells
  20. Effect of inhomogeneous size and shape of graphite particles on the in-plane electrical conductivity of PP/G/CB composites
  21. The durability of fired brick incorporating textile factory waste ash and basaltic pumice
  22. DGM News
  23. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 21.1.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.110691/html
Scroll to top button