DGM News

Articles in the same Issue

1. Contents
2. Contents
3. Original Contributions
4. Diffusivities and atomic mobilities in Cu-rich fcc Al–Cu–Mn alloys
5. Phase transformations in non-isothermally annealed as-cast and cold-rolled AlMnScZr alloys
6. High-temperature deformation behavior and thermal properties of an Ni30Co17Fe53 alloy
7. Microstructural and mechanical properties of dual-phase steels welded using GMAW with solid and flux-cored welding wires
8. Microstructure – wear performance relationship of hypoeutectic 15% Cr-2% Mo white iron
9. The enhancement of wear properties of squeeze-cast A356 composites reinforced with B₄C particulates
10. Phase diagram of the Al–Dy–Zr ternary system at 773 K
11. Calorimetric investigations of liquid gold–antimony–tin alloys
12. Combustion synthesis and characterization of bulk nanostructured Ni₅₀Al₁₇Fe₃₃ alloy
13. Effect of sand blasting on structural, thermal, and mechanical properties of Zr_58.3Cu_18.8Al_14.6Ni_8.3 bulk metallic glass
14. Studies of dynamic mass transfer at the slag–metal interface – Interfacial velocity measurements
15. Structural and optical investigation of gadolinia-doped ceria powders prepared by polymer complex solution method
16. Adsorption of bovine serum albumin onto titanium dioxide nanotube arrays
17. CNT-based displacement sensor
18. Non-covalent assembly of hybrid nanostructures of gold and palladium nanoparticles with carbon nanotubes
19. Effect of solid content on performance of conductive silver paste for crystalline silicon solar cells
20. Effect of inhomogeneous size and shape of graphite particles on the in-plane electrical conductivity of PP/G/CB composites
21. The durability of fired brick incorporating textile factory waste ash and basaltic pumice
22. DGM News
23. DGM News