Startseite Technik On the composition and pressure dependence of the self-diffusion coefficient in liquid metals
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

On the composition and pressure dependence of the self-diffusion coefficient in liquid metals

  • Dezsö L. Beke
Veröffentlicht/Copyright: 11. Juni 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 101 Heft 3

Abstract

It is shown that a minimum derivation of the recently published unified equation for the temperature dependence of the self-diffusion coefficient in liquid metals can be also obtained from the similarity of interatomic potentials, using dimensional analysis. This relation is extended for the determination of the pressure and composition dependence of the self-diffusion coefficients by the use of pressure and composition dependent scaling parameters (melting point, atomic volume and mass).

Keywords: Self-diffusion; Liquid metals; Temperature, pressure and composition dependence
* Correspondence address, Professor Dr. D. L. Beke, Department for Solid State Physics, University of Debrecen, 4032 Debrecen, PoBox. 2, Hungary. Tel.: +36 52 316 073, Fax: +35 52 316 073. E-mail:

References

[1] G.Kaptay: Int. J. Mat. Res. (formerly Z. Metallkd.)99 (2008) 1.Suche in Google Scholar

[2] D.L.Beke, G.Erdélyi, F.J.Kedves: J. Phys. Chem. Solids42 (1981) 163.10.1016/0022-3697(81)90077-9Suche in Google Scholar

[3] D.L.Beke, I.Goődény, F.J.Kedves, G.Erdélyi: J. Phys. Chem. Solids40 (1979) 543.10.1016/0022-3697(79)90083-0Suche in Google Scholar

[4] D.L.Beke, G.Neumann, I.A.Szabó: phys. stat. sol. (b)155 (1989) 385.Suche in Google Scholar

[5] D.L.Beke, I.Uzonyi, F.J.Kedves: Phil. Mag. A44 (1981) 983.10.1080/01418618108239562Suche in Google Scholar

[6] D.L.Beke: Def. and Diff. Forum, 66-69 (1990) 127.10.4028/www.scientific.net/DDF.66-69.127Suche in Google Scholar

[7] T.Geszti: Phys. Lett.A29 (1969) 425.10.1016/0375-9601(69)90498-8Suche in Google Scholar

[8] C.M.Focken: “Dimensional methods and their applications” Edward Arnold and Co., London (1953).Suche in Google Scholar

[9] J.O.Hirschfelder, C.F.Curtis, R.B.Bird: “Molecular theory of gases and liquids” John Wiley, New York (1954).Suche in Google Scholar

[10] G.Kaptay: Int. J. Mat. Res. (formerly Z. Metallkd.)96 (2005) 24.10.3139/146.018080Suche in Google Scholar

[11] T.Goreczki: Z. Metallkd.68 (1977) 231.10.1515/ijmr-1977-680312Suche in Google Scholar

[12] D.L.Beke, in: G.E.Murch (Ed.), “Diffusion in Solids – Unsolved problems” Trans Tech Publication, Switzerland (1992).Suche in Google Scholar

Received: 2008-2-24
Accepted: 2009-7-2
Published Online: 2013-06-11
Published in Print: 2010-03-01

© 2010, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Basic
  4. The study of recrystallisation and crystallographic texture genesis in industrial steels
  5. Properties of copper composites strengthened by nano- and micro-sized Al2O3 particles
  6. High temperature stability of Cr-carbides in an experimental Co–Re-based alloy
  7. Growth and structure of NdGaO3 films prepared by metal–organic deposition
  8. On the composition and pressure dependence of the self-diffusion coefficient in liquid metals
  9. The relationship between the microstructure and the magnetic properties of nano-scale magnetic particles in a Cu–Fe–Co ternary alloy
  10. The microstructure and magnetic properties of nano-scale Fe magnetic particles precipitated in a Cu–Fe alloy
  11. The effect of grain size on the corrosion inhibitor adsorption of nanocrystalline iron metal
  12. Applied
  13. In-situ observation of creep damage evolution in Al–Al2O3 MMCs by synchrotron X-ray microtomography
  14. The effect of grain refiner and combined electro-magnetic field on grain evolution of horizontal direct chill casting 7075 aluminum alloy
  15. Luminescence of aqueous reactions derived NiWO4 powders and sol-gel deposited films
  16. Thermo-mechanical modeling of friction stir welding
  17. Phase transformation temperatures of pure iron and low alloyed steels in the low temperature region using DTA
  18. Effect of ECAE conditions on the microstructure, texture and mechanical properties of an extruded Mg–Zn–Y–Zr alloy
  19. Heat transfer analysis of special reinforced NSC-columns under severe fire conditions
  20. High-speed milling strategies in mould manufacturing
  21. Effect of solution heat treatment on the age hardening capacity of dendritic and globular AlSi7Mg0.6 alloys
  22. Notification
  23. DGM News
https://doi.org/10.3139/146.110286
Schlagwörter für diesen Artikel
Self-diffusion; Liquid metals; Temperature, pressure and composition dependence

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Basic
  4. The study of recrystallisation and crystallographic texture genesis in industrial steels
  5. Properties of copper composites strengthened by nano- and micro-sized Al2O3 particles
  6. High temperature stability of Cr-carbides in an experimental Co–Re-based alloy
  7. Growth and structure of NdGaO3 films prepared by metal–organic deposition
  8. On the composition and pressure dependence of the self-diffusion coefficient in liquid metals
  9. The relationship between the microstructure and the magnetic properties of nano-scale magnetic particles in a Cu–Fe–Co ternary alloy
  10. The microstructure and magnetic properties of nano-scale Fe magnetic particles precipitated in a Cu–Fe alloy
  11. The effect of grain size on the corrosion inhibitor adsorption of nanocrystalline iron metal
  12. Applied
  13. In-situ observation of creep damage evolution in Al–Al2O3 MMCs by synchrotron X-ray microtomography
  14. The effect of grain refiner and combined electro-magnetic field on grain evolution of horizontal direct chill casting 7075 aluminum alloy
  15. Luminescence of aqueous reactions derived NiWO4 powders and sol-gel deposited films
  16. Thermo-mechanical modeling of friction stir welding
  17. Phase transformation temperatures of pure iron and low alloyed steels in the low temperature region using DTA
  18. Effect of ECAE conditions on the microstructure, texture and mechanical properties of an extruded Mg–Zn–Y–Zr alloy
  19. Heat transfer analysis of special reinforced NSC-columns under severe fire conditions
  20. High-speed milling strategies in mould manufacturing
  21. Effect of solution heat treatment on the age hardening capacity of dendritic and globular AlSi7Mg0.6 alloys
  22. Notification
  23. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2026 De Gruyter Brill
Heruntergeladen am 1.2.2026 von https://www.degruyterbrill.com/document/doi/10.3139/146.110286/html
Button zum nach oben scrollen