Startseite Nickel coating on some organic and carbon fibres by chemical plating
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Nickel coating on some organic and carbon fibres by chemical plating

  • Fan Li , Youngjo Kang , Dengjun Zhang und Du Sichen
Veröffentlicht/Copyright: 11. Juni 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 99 Heft 1

Abstract

A new method was developed to produce nickel coated fibres, which could be used as a raw material for making lightweight electrodes in nickel based secondary batteries. Hydrazine was employed as the reducing agent, ammonia solution as a complexing agent, nickel sulphate as the source of nickel ions and ammonia – ammonium sulphate as the buffer system. While the experiments confirmed that the ammonia – ammonium sulphate system could be applied for plating nickel on viscose, polyester, polyamide and carbon fibres, viscose fibre was found to be the more suitable material. The suitable operating conditions were reported.

Keywords: Nickel coating; Chemical plating; Viscose fibre
* Correspondence address, Prof. Du Sichen, Department of Material Science and Engineering, Royal Institute of technology, Brinellvägen 23, SE 10044, Stockholm, Sweden, Tel.: +46 8 790 8359, Fax: +46 8 790 0939, E-mail:

References

[1] C.T.Ho: J. Mater. Res.10 (1995) 1730.10.1557/JMR.1995.1730Suche in Google Scholar

[2] Y.M.Ryu, E.P.Yoon, M.H.Rhee: J. Mater. Sci. Lett.19 (2000) 1103.10.1023/A:1006780212533Suche in Google Scholar

[3] C.T.Ho: J. Mater. Sci.31 (1996) 5781.10.1007/BF01160828Suche in Google Scholar

[4] F.A.Hussain, A.M.Zihlif: J. Thermoplast. Compos. Mater.6 (1993) 120.10.1177/089270579300600203Suche in Google Scholar

[5] Y.S.Ho, P.Schoen: J. Mater. Res.9 (1994) 246.10.1557/JMR.1994.0246Suche in Google Scholar

[6] G.Lu, X.Li, H.Jiang: Compos. Sci. and Technol.56 (1996) 193.10.1016/0266-3538(95)00143-3Suche in Google Scholar

[7] D.Coates, G.Paul, P.Daugherty: J. Power Sources29 (1990) 521.10.1016/0378-7753(90)85022-5Suche in Google Scholar

[8] W.Taucher, T.C.Adler, F.C.Mclarnon, E.J.Cairns: J. Power Sources58 (1996) 93.10.1016/0378-7753(96)02327-0Suche in Google Scholar

[9] J.Ge, L.Lu, Y.Wang, W.Tang: Battery26 (1996) 216. (Chinese)Suche in Google Scholar

[10] C.C.Lee, A.Shimamoto: Mater. Trans.45 (2004) 1839.10.2320/matertrans.45.1839Suche in Google Scholar

[11] M.Zhu, D.D.L.Chung: J. Electro. Packag.113 (1991), 417.10.1115/1.2905429Suche in Google Scholar

[12] X.Yuan, X.Deng, Y.Wang, F.Zhan: Battery30 (2000) 166. (Chinese)Suche in Google Scholar

[13] W.H.Zhu, P.J.Durben, B.J.Tatarchuk: J. Power Sources111 (2002) 221.10.1016/S0378-7753(02)00299-9Suche in Google Scholar

[14] H.Araya, S.Takagi: Conductive cloth and silk and its manufacture, Jpn. Kokai Koho JP 11346089 A2, Issued December 14, 1999.Suche in Google Scholar

[15] A.Hosoe, Y.Oka, T.Sakamoto, T.Uemiya, K.Hanabusa, A.Fujii: Manufacture of metallic porous material, Jpn. Kokai Tokkyo Koho JP 8124578 A2, Issued May 17, 1996.Suche in Google Scholar

[16] E.G.Han, E.A.Kim, K.W.Oh: Somyu Konghakhoechi. 35 (1998) 515. (Korean)Suche in Google Scholar

[17] F.Li, D.Zhang: Metall. Mater. Trans. B38 (2007) 149.10.1007/s11663-007-9030-9Suche in Google Scholar

[18] X.C.He, Z.F.Xie, M.L.Chen: Precious Metal24 (2003) 16. (Chinese)Suche in Google Scholar

[19] P.Steinmetz, S.Alperine, A.Friantcostantini, P.Josso: Surf. Coat. Technol. 43/44 (1990) 500.10.1016/0257-8972(90)90101-HSuche in Google Scholar

[20] F.Li, D.Zhang, D.Sichen: Int. J. Mat. Res. (Z. Metallkd.)98 (2007) 526.Suche in Google Scholar

Received: 2007-1-30
Accepted: 2007-6-25
Published Online: 2013-06-11
Published in Print: 2008-01-01

© 2008, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Prof. Dr.-Ing. habil. Dr.-Ing. E. h. Werner Schatt zum 85. Geburtstag
  5. Basic
  6. In-situ reaction synthesis and decomposition of Ta2AlC
  7. A new theoretical equation for temperature dependent self-diffusion coefficients of pure liquid metals
  8. Thermodynamic characterization of liquid alloys with demixing tendency: Bi–Ga
  9. Space charge effects in confined ceramic systems
  10. Solute transport and phase composition in an Al–Mg–Si alloy solidified under conditions of forced flow
  11. Evidence of α → ω phase transition in titanium after high pressure torsion
  12. Thermodynamic properties and elastic constants of Nd–Mg intermetallics: a molecular dynamics study
  13. Microstructure, texture and mechanical properties of the magnesium alloy AZ31 processed by ECAP
  14. Applied
  15. Effect of solidification microstructure and Ca additions on creep strength of magnesium alloy AZ91 processed by Thixomolding
  16. Magnetic hardening mechanism of PrCo5-based ribbons with C addition prepared by melt spinning
  17. Studies on the exchange and dipolar couplings in Nd2Fe14B/α-Fe
  18. Microstructural characteristics and elevated temperature wear of Ti-11Si-16Al alloy
  19. Nickel coating on some organic and carbon fibres by chemical plating
  20. Wear and corrosion properties of nanocrystalline coatings on stainless steel produced by plasma electrolytic nitrocarburizing
  21. The characterisation of microstructural changes in rapidly solidified Al–Fe alloys through measurement of their electrical resistance
  22. Solid inclusion cakes formed during pressure filtration tests of liquid aluminum alloys
  23. Performance of Ni/YSZ cermet cathode prepared by mechanical alloying for high temperature electrolysis of water vapor (steam): effect of anode and cathode thicknesses on the efficiency of hydrogen production
  24. Review
  25. Practical aspects and implications of interfaces in glass-ceramics: a review
  26. Notifications
  27. DGM News
https://doi.org/10.3139/146.101605
Schlagwörter für diesen Artikel
Nickel coating; Chemical plating; Viscose fibre

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Prof. Dr.-Ing. habil. Dr.-Ing. E. h. Werner Schatt zum 85. Geburtstag
  5. Basic
  6. In-situ reaction synthesis and decomposition of Ta2AlC
  7. A new theoretical equation for temperature dependent self-diffusion coefficients of pure liquid metals
  8. Thermodynamic characterization of liquid alloys with demixing tendency: Bi–Ga
  9. Space charge effects in confined ceramic systems
  10. Solute transport and phase composition in an Al–Mg–Si alloy solidified under conditions of forced flow
  11. Evidence of α → ω phase transition in titanium after high pressure torsion
  12. Thermodynamic properties and elastic constants of Nd–Mg intermetallics: a molecular dynamics study
  13. Microstructure, texture and mechanical properties of the magnesium alloy AZ31 processed by ECAP
  14. Applied
  15. Effect of solidification microstructure and Ca additions on creep strength of magnesium alloy AZ91 processed by Thixomolding
  16. Magnetic hardening mechanism of PrCo5-based ribbons with C addition prepared by melt spinning
  17. Studies on the exchange and dipolar couplings in Nd2Fe14B/α-Fe
  18. Microstructural characteristics and elevated temperature wear of Ti-11Si-16Al alloy
  19. Nickel coating on some organic and carbon fibres by chemical plating
  20. Wear and corrosion properties of nanocrystalline coatings on stainless steel produced by plasma electrolytic nitrocarburizing
  21. The characterisation of microstructural changes in rapidly solidified Al–Fe alloys through measurement of their electrical resistance
  22. Solid inclusion cakes formed during pressure filtration tests of liquid aluminum alloys
  23. Performance of Ni/YSZ cermet cathode prepared by mechanical alloying for high temperature electrolysis of water vapor (steam): effect of anode and cathode thicknesses on the efficiency of hydrogen production
  24. Review
  25. Practical aspects and implications of interfaces in glass-ceramics: a review
  26. Notifications
  27. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 28.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.101605/pdf?lang=de
Button zum nach oben scrollen