DGM News

Artikel in diesem Heft

1. Contents
2. Contents
3. Editorial
4. Horst Cerjak – Emeritus Professor
5. Review
6. Calculation of crystallographic texture due to displacive transformations
7. Basic
8. Ferrite transformation from oxide–steel interface in HAZ-simulated C–Mn steel
9. Influence of metastable tetragonal ZrO₂-reinforcements on the properties of MoSi₂-composites
10. Joining strategies for open-porous metallic foams
11. Precipitation behaviour of an Fe–Co–Mo-alloy during non-isothermal ageing
12. Characterization of δ-phase in superalloy Allvac 718Plus^TM
13. Direct observation of phase transformations in the simulated heat-affected zone of a 9Cr martensitic steel
14. Effect of boron on creep deformation behavior and microstructure evolution in 9% Cr steel at 650°C
15. Effect of stress on the creep deformation of ASME Grade P92/T92 steels
16. Applied
17. Assessment of creep rupture life of weldments of martensitic steels
18. Computational analysis of the precipitation kinetics in a complex tool steel
19. Predicted precipitate back-stress and creep rupture strength of the advanced 9–12% Cr steel COST E2
20. Compositional characterisation and thermodynamic modelling of nitride precipitates in a 12% Cr steel
21. The L2 norm of the deviation between the measured and computed transient displacement field in a test weld
22. Toward reliable calculations of heat and plastic flow during friction stir welding of Ti-6Al-4V alloy
23. Notifications
24. DGM News