Skip to main content
Article
Licensed
Unlicensed Requires Authentication

DGM News

Published/Copyright: February 25, 2019
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 110 Issue 3

Published Online: 2019-02-25
Published in Print: 2019-03-13

© 2019, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Static recrystallization characteristics and kinetics of high-silicon steels for direct quenching and partitioning
  5. Kinetics of intermetallic compound layers during initial period of reaction between mild steel and molten aluminum
  6. Effects of Cr and Zn on the interfacial microstructures of borides in Fe–Cr–B cast steels during hot-dipping in Al–Zn alloys
  7. Hot deformation behaviour of and processing map for an Ni-based austenitic stainless steel
  8. Design, microstructural characterization and heat treatment of novel Cu0.5FeNiVAlx high-entropy alloys
  9. Effects of temperature field and SiC nanoparticles on microstructure and mechanical properties of n-SiCp/Mg-9 %Al composites fabricated by ultrasonication-assisted semi-solid hot pressing of powder
  10. Investigation of the microstructure and mechanical properties of NbB2 particle reinforced aluminum matrix composites
  11. Effect of Al2O3/SiO2 ratio on viscosity and structure of CaO–Al2O3–SiO2–CaF2–MgO slag
  12. Microstructure and oxidation of Ni–Fe2O3 composite coating on AISI 304 stainless steel
  13. Synthesis and performance of Al3+-doped cathode materials 0.6Li[Li1/3Mn2/3]O2 · 0.4Li[Ni1/3Mn1/3Co(1/3-y)Aly]O2 by high temperature solid-state method
  14. Growth and photo-electrochemical properties of rutile TiO2 nanowire arrays prepared by the hydrothermal method
  15. Deposition of fine copper film on samples placed internally and externally to the cathodic cage
  16. DGM News
  17. DGM News
https://doi.org/10.3139/146.019034

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Static recrystallization characteristics and kinetics of high-silicon steels for direct quenching and partitioning
  5. Kinetics of intermetallic compound layers during initial period of reaction between mild steel and molten aluminum
  6. Effects of Cr and Zn on the interfacial microstructures of borides in Fe–Cr–B cast steels during hot-dipping in Al–Zn alloys
  7. Hot deformation behaviour of and processing map for an Ni-based austenitic stainless steel
  8. Design, microstructural characterization and heat treatment of novel Cu0.5FeNiVAlx high-entropy alloys
  9. Effects of temperature field and SiC nanoparticles on microstructure and mechanical properties of n-SiCp/Mg-9 %Al composites fabricated by ultrasonication-assisted semi-solid hot pressing of powder
  10. Investigation of the microstructure and mechanical properties of NbB2 particle reinforced aluminum matrix composites
  11. Effect of Al2O3/SiO2 ratio on viscosity and structure of CaO–Al2O3–SiO2–CaF2–MgO slag
  12. Microstructure and oxidation of Ni–Fe2O3 composite coating on AISI 304 stainless steel
  13. Synthesis and performance of Al3+-doped cathode materials 0.6Li[Li1/3Mn2/3]O2 · 0.4Li[Ni1/3Mn1/3Co(1/3-y)Aly]O2 by high temperature solid-state method
  14. Growth and photo-electrochemical properties of rutile TiO2 nanowire arrays prepared by the hydrothermal method
  15. Deposition of fine copper film on samples placed internally and externally to the cathodic cage
  16. DGM News
  17. DGM News
Downloaded on 25.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.019034/html?lang=en
Scroll to top button