Contents

Articles in the same Issue

1. Contents
2. Contents
3. Original Contributions
4. Static recrystallization characteristics and kinetics of high-silicon steels for direct quenching and partitioning
5. Kinetics of intermetallic compound layers during initial period of reaction between mild steel and molten aluminum
6. Effects of Cr and Zn on the interfacial microstructures of borides in Fe–Cr–B cast steels during hot-dipping in Al–Zn alloys
7. Hot deformation behaviour of and processing map for an Ni-based austenitic stainless steel
8. Design, microstructural characterization and heat treatment of novel Cu_0.5FeNiVAl_x high-entropy alloys
9. Effects of temperature field and SiC nanoparticles on microstructure and mechanical properties of n-SiCp/Mg-9 %Al composites fabricated by ultrasonication-assisted semi-solid hot pressing of powder
10. Investigation of the microstructure and mechanical properties of NbB₂ particle reinforced aluminum matrix composites
11. Effect of Al₂O₃/SiO₂ ratio on viscosity and structure of CaO–Al₂O₃–SiO₂–CaF₂–MgO slag
12. Microstructure and oxidation of Ni–Fe₂O₃ composite coating on AISI 304 stainless steel
13. Synthesis and performance of Al³⁺-doped cathode materials 0.6Li[Li_1/3Mn_2/3]O₂ · 0.4Li[Ni_1/3Mn_1/3Co(_1/3-y)Al_y]O₂ by high temperature solid-state method
14. Growth and photo-electrochemical properties of rutile TiO₂ nanowire arrays prepared by the hydrothermal method
15. Deposition of fine copper film on samples placed internally and externally to the cathodic cage
16. DGM News
17. DGM News