Article Publicly Available

Contents

Published/Copyright: March 26, 2018
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 109 Issue 4

Published Online: 2018-03-26
Published in Print: 2018-04-13

© 2018, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Deposition of CVD-TiCN and TiAlN coatings guided with thermodynamic calculations
  5. Microstructure and mechanical properties of ultra-fine WC-10Co cemented carbides with Cr3C2 and NbC: Experimental investigation supported by thermodynamic calculation
  6. Enthalpies of mixing in binary Mn–In and ternary Mn–In–Gd liquid alloys
  7. Thermal stability of Nb–Cr–Mo alloy
  8. Effect of processing parameters on the grain refinement of vanadium nitrogen microalloyed steel
  9. Effects of heat treatment and testing temperature on the tensile properties of Al–Cu and Al–Cu–Si based alloys
  10. Fabrication of Al–Si Gasar by mold casting technique
  11. Tribological performance of glass/epoxy composites filled with MWCNTs
  12. Reaction fabrication and wear performance of TiCx/(Cu–A1) bonded diamond composites
  13. DC-EPD of nanoceramic particles accelerated via anodic dissolution in organic media
  14. Short Communications
  15. Formation of zirconia precursor nanoplates mediated by ionic liquid and transformation to monoclinic ZrO2 nanostructures
  16. Characterization of interfaces in tri-layered brass/steel/brass composites fabricated by casting and hot dipping
  17. DGM News
  18. DGM News
https://doi.org/10.3139/146.018042

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Deposition of CVD-TiCN and TiAlN coatings guided with thermodynamic calculations
  5. Microstructure and mechanical properties of ultra-fine WC-10Co cemented carbides with Cr3C2 and NbC: Experimental investigation supported by thermodynamic calculation
  6. Enthalpies of mixing in binary Mn–In and ternary Mn–In–Gd liquid alloys
  7. Thermal stability of Nb–Cr–Mo alloy
  8. Effect of processing parameters on the grain refinement of vanadium nitrogen microalloyed steel
  9. Effects of heat treatment and testing temperature on the tensile properties of Al–Cu and Al–Cu–Si based alloys
  10. Fabrication of Al–Si Gasar by mold casting technique
  11. Tribological performance of glass/epoxy composites filled with MWCNTs
  12. Reaction fabrication and wear performance of TiCx/(Cu–A1) bonded diamond composites
  13. DC-EPD of nanoceramic particles accelerated via anodic dissolution in organic media
  14. Short Communications
  15. Formation of zirconia precursor nanoplates mediated by ionic liquid and transformation to monoclinic ZrO2 nanostructures
  16. Characterization of interfaces in tri-layered brass/steel/brass composites fabricated by casting and hot dipping
  17. DGM News
  18. DGM News
Downloaded on 14.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.018042/html
Scroll to top button