Hans-Peter Degischer – 65^th birthday

Artikel in diesem Heft

1. Contents
2. Contents
3. Editorial
4. Hans-Peter Degischer – 65^th birthday
5. Basic
6. X-ray and neutron imaging – Complementary techniques for materials science and engineering
7. Fast in-situ X-ray micro tomography characterisation of microstructural evolution and strain-induced damage in alloys at various temperatures
8. Thermo-kinetic computer simulation of differential scanning calorimetry curves of AlMgSi alloys
9. Influence of stacking fault energy and alloying on stage V hardening of HPT-deformed materials
10. Thermo-physical properties of silver/carbon fibre composites
11. Influence of reinforcement contiguity on the thermal expansion of alumina particle reinforced aluminium composites
12. A continuum based microstructure model of inhomogeneous hardening and recovery as a pre-stage of recrystallization nucleation
13. Applied
14. Metal foams – towards microcellular materials
15. Gigacycle fatigue response of tool steels produced by powder metallurgy compared to ingot metallurgy tool steels
16. Characterization of the microstructure and damage mechanisms in a Ti6Al4V alloy modified with 1 wt.% B
17. Structural and age hardening characteristics of near eutectic Al–Si alloys
18. Stress-corrosion cracking susceptibility of AZ31 alloy after varied heat-treatment in 3.5 wt.% NaCl solution
19. Tensile deformation behavior of AA5083-H111 at cold and warm temperatures
20. Experimental investigation of thermal fatigue behaviour of header tube to stub welded joint in power plants
21. Synthesis and characterization of nanostructured Cu/ZnO/Al₂O₃ from lyotropic liquid crystalline templates
22. DGM News
23. Personal