Startseite Artificial neural network approach to predict ion nitrided case depth and surface hardness of AISI 4340 steel
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Artificial neural network approach to predict ion nitrided case depth and surface hardness of AISI 4340 steel

  • Sule Y. Sirin und Melih İnal
Veröffentlicht/Copyright: 28. Mai 2019
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Materials Testing
Aus der Zeitschrift Materials Testing Band 61 Heft 6

Abstract

Since surface hardness affects wear resistance and case depth affects fatigue strength, the optimum value of both is extremely important with respect to the area of use. The aim of this study was to investigate the possibility of predicting case depth and surface hardness in ion nitrided AISI 4340 steels as a function of process time and temperature by using artificial neural networks and to obtain useful case depth and surface hardness data from an artificial neural networks model. Two projections were created for ion nitrided case depth and surface hardness, both depending on process time and temperature, and the conclusion was reached that the experimental data provides sufficient predictability regarding the artificial neural networks model. In the multilayer perceptron artificial neural networks architecture designed, two outputs (case depth and surface hardness) were determined in the same network according to the inputs, thus providing the integrity of the system characterization. The system was created by means of a Matlab simulink graphical user interface, which determined the artificial neural networks outputs according to the specified input with the purpose of visualizing the process. Different input values could be entered for visually determining the output values of the process.

*Correspondence Address, Prof. Dr. Melih İnal, Department of Informatics, Kocaeli University, Umuttepe Campus, 41380 Kocaeli, Turkey, E-mail: ,

Assist. Prof. Dr. Sule Yildiz Sirin, born in 1970, graduated from the Department of Mechanical Engineering at Yıldız Technical University, Istanbul, Turkey in 1992. She received her MSc and PhD degrees in the Mechanical Engineering Department of Kocaeli University, in 1996 and 2004, respectively. She is presently employed as Assistant Professor at the Vocational School of Asım Kocabıyık, Kocaeli University, Kocaeli, Turkey. Her research areas are the mechanical properties of materials, welding and surface engineering.

Prof. Dr. Melih İnal, born in 1971, graduated from the Electronics and Computer Education Department of Marmara University, Istanbul, Turkey in 1993. He received his MSc degree at the Electronics and Computer Education Department of Kocaeli University, Turkey in 1996. He received his PhD degree in Electrical Education from that university in 2001. He is presently Professor in the Department of Informatics at Kocaeli University Kocaeli, Turkey. His research areas are pattern recognition, soft computing, machine learning and information systems.

References

1 J. M.O'Brien, D.Goodman: Plasma (ion) nitriding, in: Metals Handbook No. 10, Heat Treating, American Society for Materials, Materials Park, Ohio (1991), pp. 420–424Suche in Google Scholar

2 M. B.Karamış: Some effects of the plasma nitriding process on layer properties, Thin Solid Films217 (1992), pp. 38–4710.1016/0040-6090(92)90603-9Suche in Google Scholar

3 M. B.Karamış: Tribological behavior of plasma nitride 722M24 material under dry sliding conditions, Wear147 (1991), pp. 385–39910.1016/0043-1648(91)90194-YSuche in Google Scholar

4 M. B.Karamış, A. M.Staines: An evaluation of the response of 722M24 steel to high-temperature plasma nitriding treatments, Heat Treatment of Metals3 (1989), pp. 79–82Suche in Google Scholar

5 Y.Sun, T.Bell: Plasma surface engineering of low alloy steel, Materials Science and Engineering A140 (1991), pp. 419–434DOI:10.1016/0921-5093(91)90458-YSuche in Google Scholar

6 A.Çelik, S.Karadeniz: Investigation of compound layer formed during ion nitriding of AISI 4140 steel, Surface Coatings Technology80 (1996), pp. 283–286DOI:10.1016/0257-8972(95)02471-9Suche in Google Scholar

7 S. Y.Sirin, E.Kaluc: Structural surface characterization of ion nitrided AISI 4340 steel, Materials and Design36 (2012), pp. 741–74710.1016/j.matdes.2011.12.025Suche in Google Scholar

8 A.Alsaran, M.Karakan, A.Celik: The investigation of mechanical properties of ion-nitrided AISI 5140 low-alloy steel, Materials Characterization48 (2002), pp. 323–32710.1016/S1044-5803(02)00275-9Suche in Google Scholar

9 K. S.Cho, C. O.Lee: The effect of carbon on ion-nitriding, Journal of Engineering Materials and Technology102 (1980), pp. 229–23310.1115/1.3224802Suche in Google Scholar

10 K. S.Fancey, A.Leyland, D.Egerton, D.Torres, A.Matthews: The influence of process gas characteristics on the properties of plasma nitrided steel, Surface Coatings Technology 76 –77 (1995), pp. 694–69910.1016/0257-8972(96)80008-9Suche in Google Scholar

11 C. V.Robino, O. T.Inal: Ion nitriding behavior of several low alloy steels, Materials Science and Engineering59 (1983), pp. 79–9010.1016/0025-5416(83)90090-3Suche in Google Scholar

12 K.Ozbaysal, O. T.Inal, A. D.Romig: Ion nitriding behavior of several tool steels, Materials Science and Engineering78 (1986), pp. 179–19110.1016/0025-5416(86)90322-8Suche in Google Scholar

13 K.Genel, M.Demirkol, M.Çapa: Effect of ion nitriding on fatigue behavior of AISI 4140 steel, Materials Science and Engineering A279 (2000), pp. 207–21610.1016/S0921-5093(99)00689-9Suche in Google Scholar

14 A.Akbari, R.Mohammadzadeh, C.Templier, J. P.Riviere: Effect of the initial microstructure on the plasma nitriding behavior of AISI M2 high speed steel, Surface Coatings Technology204 (2010), pp. 4114–412010.1016/j.surfcoat.2010.05.042Suche in Google Scholar

15 S. Y.Sirin, K.Sirin, E.Kaluc: Influence of initial conditions on the mechanical behavior of ion nitrided AISI 4340 steel, Materials Science and Engineering: A564 (2013), pp. 232–24110.1016/j.msea.2012.11.029Suche in Google Scholar

16 O. T.İnal, C. V.Robino: Structural characterization of some ion nitrided steels, Thin Solid Films95 (1982), pp. 195–20710.1016/0040-6090(82)90242-5Suche in Google Scholar

17 T.Spalvins: Tribological and microstructural characteristics of ion-nitrided steels, Thin Solid Films108 (1983), pp. 157–16310.1016/0040-6090(83)90500-XSuche in Google Scholar

18 A. S. W.Kruny, R. M.Mallya, R. M.Mohan: A study on the nature of the compound layer formed during the ion nitriding of EN 40B steel, Materials Science and Engineering78 (1986), pp. 95–10010.1016/0025-5416(86)90083-2Suche in Google Scholar

19 F.Ashrafizadeh: Influence of plasma and gas nitriding on fatigue resistance of plain carbon (CK 45) steel: Surface Coatings Technology173-174 (2003), pp. 1196–120010.1016/S0257-8972(03)00460-2Suche in Google Scholar

20 D. C.Wen: Microstructure and corrosion resistance of the layers formed on the surface of precipitation hardenable plastic mold steel by plasma-nitriding, Applied Surface Science256 (2009), pp. 797–80410.1016/j.apsusc.2009.08.062Suche in Google Scholar

21 A.Celik, S.Karadeniz: Improvement of the fatigue strength of AISI 4140 steel by an ion nitriding process, Surface Coatings Technology72 (1995), pp. 169–17310.1016/0257-8972(94)02348-4Suche in Google Scholar

22 S. Y.Sirin, K.Sirin, E.Kaluc: Effect of the ion nitriding surface hardening process on fatigue behavior of AISI 4340 steel, Materials Characterization59 (2008), pp. 351–35810.1016/j.matchar.2007.01.019Suche in Google Scholar

23 T.Bell, N. L.Loh: The fatigue characteristics of plasma nitrided three-pct. Cr–Mo steel, Journal of Heat Treating2/3 (1982), pp. 232–237Suche in Google Scholar

24 M. M.Tosic, I.Terzic, R.Gligorijevic, M.Ognjanovic: Fatigue improvements of glow-discharge-plasma-nitride steel rotary specimens, Surface Coatings Technology63 (1994), pp. 73–8310.1016/S0257-8972(05)80010-6Suche in Google Scholar

25 T.Malinova, S.Malinov, N.Pantev: Simulation of microhardness profiles for nitrocarburized surface layers by artificial neural network, Surface Coatings Technology135 (2001), pp. 258–26710.1016/S0257-8972(00)00991-9Suche in Google Scholar

26 G.Khalaj: Artificial neural network to predict the effects of coating parameters on layer thickness of chromium carbonitride coating on pre-nitrided steels, Neural Computing and Applications23 (2013), pp. 779–78610.1007/s00521-012-0994-2Suche in Google Scholar

27 K.Genel: Use of artificial neural network for prediction of ion nitrided case depth in Fe–Cr alloys, Materials and Design24 (2003), pp. 203–20710.1016/S0261-3069(03)00002-5Suche in Google Scholar

28 K.Genel, I.Ozbek, A.Kurt, C.Bindal: Boriding response of AISI W1 steel and use of artificial neural network for prediction of borided layer properties, Surface Coatings Technology160 (2002), pp. 38–4310.1016/S0257-8972(02)00400-0Suche in Google Scholar

29 Q.Zeng, J.Zu, L.Zhang, G.Dai: Designing expert system with artificial neural networks for in situ toughened Si3N4, Materials and Design23 (2002), pp. 287–29010.1016/S0261-3069(01)00076-0Suche in Google Scholar

30 S.Yilmaz, A. A.Arıcı, E.Feyzullahoglu: Surface roughness prediction in machining of cast polyamide using neural network, Neural Computing and Applications20 (2011), pp. 1249–125410.1007/s00521-011-0557-ySuche in Google Scholar

Published Online: 2019-05-28
Published in Print: 2019-06-01

© 2019, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Inhalt/Contents
  2. Contents
  3. Fachbeiträge/Technical Contributions
  4. Investigation of phase transformations in mill scales for the purification process
  5. Exposure response function for a quantitative prediction of weathering caused aging of polyethylene
  6. Mechanical properties characterization of resistance spot welded DP1000 steel under uniaxial tensile tests
  7. Corrosion failure analysis of a perforated F32 reactor
  8. Prediction of mechanical properties of Al6061 metal matrix composites reinforced with zircon sand and boron carbide
  9. Tribological behavior of a hydrostatically extruded ultra-fine grained Ti-13Nb-13Zr alloy
  10. Characterization of boronized AISI 1050 steel and optimization of process parameters
  11. Experimental investigation on mechanical properties of AA7075-AlN composites
  12. Modeling of machining parameters for MRR and TWR in EDM characteristics on Al/10 wt.-% TiB2 composites
  13. Artificial neural network approach to predict ion nitrided case depth and surface hardness of AISI 4340 steel
  14. Theoretical and experimental investigation of stress distribution in a crane hook
  15. Mechanical properties, degradation and flue gas analysis of basalt and glass fiber reinforced recycled polypropylene
  16. Corrosion behavior of a precipitation hardened Ni–Cr–Co–Mo alloy under partial slagging coal gasification conditions
  17. Effect of different loading systems on acousto-ultrasonic characteristics of concrete under axial compression
https://doi.org/10.3139/120.111356

Artikel in diesem Heft

  1. Inhalt/Contents
  2. Contents
  3. Fachbeiträge/Technical Contributions
  4. Investigation of phase transformations in mill scales for the purification process
  5. Exposure response function for a quantitative prediction of weathering caused aging of polyethylene
  6. Mechanical properties characterization of resistance spot welded DP1000 steel under uniaxial tensile tests
  7. Corrosion failure analysis of a perforated F32 reactor
  8. Prediction of mechanical properties of Al6061 metal matrix composites reinforced with zircon sand and boron carbide
  9. Tribological behavior of a hydrostatically extruded ultra-fine grained Ti-13Nb-13Zr alloy
  10. Characterization of boronized AISI 1050 steel and optimization of process parameters
  11. Experimental investigation on mechanical properties of AA7075-AlN composites
  12. Modeling of machining parameters for MRR and TWR in EDM characteristics on Al/10 wt.-% TiB2 composites
  13. Artificial neural network approach to predict ion nitrided case depth and surface hardness of AISI 4340 steel
  14. Theoretical and experimental investigation of stress distribution in a crane hook
  15. Mechanical properties, degradation and flue gas analysis of basalt and glass fiber reinforced recycled polypropylene
  16. Corrosion behavior of a precipitation hardened Ni–Cr–Co–Mo alloy under partial slagging coal gasification conditions
  17. Effect of different loading systems on acousto-ultrasonic characteristics of concrete under axial compression
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 19.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/120.111356/html?lang=de
Button zum nach oben scrollen