Startseite Investigation of joints between polypropylene and polybutylene terephthalate
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Investigation of joints between polypropylene and polybutylene terephthalate

  • Aylin Bekem und Ahmet Unal
Veröffentlicht/Copyright: 21. April 2015
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Materials Testing
Aus der Zeitschrift Materials Testing Band 57 Heft 5

Abstract

An effective joining between polypropylene (PP) and polybutylene terephthalate (PBT) is closely related to bonding between PP and PBT. The objective of this study is to improve the bonding between PBT and PP with a compatibilizer application between joints as tie-layer at various concentrations. Flexural strength, lap-shear strength and interlaminar shear strength of joined parts were determined to determine the adhesive bonding performance. The fracture behavior of the bonds was also investigated. It was found that using compatibilizers in a PP/PBT joining system improved the mechanical characteristics. Improved results were obtained with increasing ratios of compatibilizers in tie-layer and maximum mechanical results were achieved for 100 % compatibilizer usage in PP-PBT system.

Kurzfassung

Eine effektive Verbindung zwischen Polypropylen (PP) und Polybutylen-terephthalat (PBT) hängt sehr eng mit der Bindung zwischen PP und PBT zusammen. Das Ziel der diesem Beitrag zugrunde liegenden Studie besteht darin, die Klebverbindung zwischen PBT und PP durch Anwendung von Vermittlern als Zwischenverbindungsschicht in verschiedenen Konzentrationen zu verbessern. Die Biegefestigkeit und die Überlapp-Scherfestigkeit der verbundenen Teile wurden ermittelt, um die Adhäsionsverbindungsperformanz zu bestimmen. Das Bruchverhalten der Klebverbindungen wurde ebenfalls untersucht. Es stellte sich heraus, dass die Verwendung eines Kompatibilisators bei einem PP/PBT-Verbindungssystem die mechanischen Eigenschaften verbessert. Verbesserte Festigkeitswerte zeigten sich mit zunehmenden Vermittleranteilen in der Verbindungsschicht und die maximalen mechanischen Werte ergaben sich unter Verwendung von 100 % Kompatibilisator im PP-PBT System.

§Correspondence Address, Dr. Aylin Bekem, Department of Metallurgical and Materials Engineering, Yildiz Technical University, Davutpasa Campus, 34522, Istanbul, Turkey, E-mail:

Dipl.-Ing. Dr. Aylin Bekem, born in 1984, is Research Assistant in the Department of Metallurgical and Materials Engineering, Yildiz Technical University, Istanbul, Turkey.

Prof. Dr.-Ing. Ahmet Unal, born in 1955, is a lecturer in the Department of Metallurgical and Materials Engineering, Yildiz Technical University, Istanbul, Turkey. His professional areas of interest are composite materials, biomedical materials as well as fracture mechanics.

References

1 R. J.Crawford: Plastics Engineering, 3rd Ed., Elsevier Butterworth-Heinemann, Oxford, UK (1998)Suche in Google Scholar

2 M.ChandaS. K.Roy: Plastics Technology Handbook, 4th Ed., CRC Press, Boca Raton, FL, USA (2007)Suche in Google Scholar

3 V. K.Stokes: Joining methods for plastics and plastic composites: An overview, Polym. Eng. Sci.29 (1989), pp. 1310–132410.1002/pen.760291903Suche in Google Scholar

4 A.AjjiL. A.Utracki: lnterphase and compatibilization of polymer blends, Polym. Eng. Sci.36 (1996), pp. 1574–158510.1002/pen.10554Suche in Google Scholar

5 T.VainioG. H.HuM.LamblaJ. V.Seppala: Functionalized polypropylene prepared by melt free radical grafting of low volatile oxazoline and its potential in compatibilization of PP/PBT blends, J. Appl. Polym. Sci.61 (1996), pp. 843–85210.1002/(SICI)1097-4628(19960801)61:5<843::AID-APP17>3.0.CO;2-YSuche in Google Scholar

6 G. H.HuY. J.SunM.Lambla: Effects of processing parameters on the in-situ compatibilization of polypropylene and poly(butylene terephthalate) blends by one-step reactive extrusion, J. Appl. Polym. Sci.61 (1996), pp. 1039–104710.1002/(SICI)1097-4628(19960808)61:6<1039::AID-APP18>3.0.CO;2-RSuche in Google Scholar

7 A.ZhangB.ZhangZ.Feng: Compatibilization by main-chain thermotropic liquid crystalline ionomer of blends of PBT/PP, J. Appl. Polym. Sci.85 (2002), pp. 1110–111710.1002/app.10629Suche in Google Scholar

8 B. Y.ZhangQ. J.SunQ. Y.LiY.Wang: Thermal, morphological and mechanical characteristics of polypropylene/polybutylene terephthalate blends with a liquid crystalline polymer or ionomer, J. Appl. Polym. Sci.102 (2006), pp. 4712–471910.1002/app.24797Suche in Google Scholar

9 N.PapkeJ.Karger-Kocsis: Thermoplastic elastomers based on compatibilized poly(ethylene terephthalate) blends: Effect of rubber type and dynamic curing, Polymer42 (2001), pp. 1109–112010.1016/S0032-3861(00)00475-4Suche in Google Scholar

10 C. P.PapadopoulouN. K.Kalfoglou: Comparison of compatibilizer effectiveness for PET/PP blends: Their mechanical, thermal and morphology characterization, Polymer41 (2000), pp. 2543–255510.1016/S0032-3861(99)00442-5Suche in Google Scholar

11 S. J.KimB. S.ShinJ. L.HongW. J.ChoC. S.Ha: Reactive compatibilization of the PBT/EVA blend by maleic anhydride, Polymer42 (2001), pp. 4073–408010.1016/S0032-3861(00)00810-7Suche in Google Scholar

12 Y. J.SunG. H.HuM.LamblaH. K.Kotlar: In-situ compatibilization of polypropylene and poly(butylene terephthalate) polymer blends by one-step reactive extrusion, Polymer37 (1996), pp. 4119–412710.1016/0032-3861(96)00229-7Suche in Google Scholar

13 H.CartierG. H.Hu: Compatibilisation of polypropylene and poly(butylene terephthalate) blends by reactive extrusion: Effects of the molecular structure of a reactive compatibiliser, J. Mater. Sci.35 (2000), pp. 1985–199610.1023/A:1004730822600Suche in Google Scholar

14 T. K.KangY.Kim: Properties of poly(butylene terephthalate)/functionaIized polyolefin blends, Polym. Eng. Sci.37 (1997), pp. 603–61410.1002/pen.11703Suche in Google Scholar

15 Y. T.ShiehT. N.LiaoF. C.Chang: Reactive compatibilization of PP/PBT blends by a mixture of PPg-MA and epoxy resin, J. Appl. Polym. Sci.79 (2001), pp. 2272–228510.1002/1097-4628(20010321)79:12<2272::AID-APP1035>3.0Suche in Google Scholar

16 C. H.TsaiF. C.Chang: Polymer blends of PBT and PP compatibilized by ethylene-co-glycidyl methacrylate copolymers, J. Appl. Polym. Sci.61 (1996), pp. 321–33210.1002/(SICI)1097-4628(19960711)61:2<321::AID-APP15>3.0.CO;2-6Suche in Google Scholar

Published Online: 2015-04-21
Published in Print: 2015-04-30

© 2015, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Inhalt/Contents
  2. Inhalt
  3. Fachbeiträge/Technical Contributions
  4. Effects of the thickness on the microstructure and corrosion behavior of a TiAlN film on 4140 steel
  5. The effect of anodizing conditions on the corrosion resistance of Ti6Al4V titanium alloy
  6. Frequency analysis of volumetric porosity in aluminum castings at high and low cooling rates
  7. Corrosion resistance of nanosilicasilicate conversion coatings on aluminum prepared by the dip immersion method
  8. Corrosion behavior of Haynes® 556® Fe-Ni-Cr-Co alloy for integrated coal gasification combined cycle syngas plants: A plant exposure study*
  9. Effects of Y2O3 and Al2O3 sintering additives on the hot pressing behavior of AlN ceramics
  10. Einfluss der Klebschichtdicke auf Kopplungsfaktor und Lebensdauer beim Bekleben von piezoelektrischen Flächenwandlern mit Epoxykleber
  11. Influence of the heat treatment on hardness and adhesive wear performance of Ni-P deposit with low phosphorus content
  12. Effect of plasma nitriding time on surface properties of hard chromium electroplated AISI 1010 steel
  13. Diffusion characteristics of plasma nitrided hard chromium on AISI 1010 steel
  14. Estimation of the mechanical properties of nanocomposites based on the properties prediction of single wall carbon nanotubes (SWCNT)
  15. Investigation of joints between polypropylene and polybutylene terephthalate
  16. Parametric optimization of seam welding of stainless steel (SS 304) sheets
  17. Effect of the powder particle size on the wear behavior of boronized AISI 304 stainless steel
  18. Optimum buckling design of axially layered graded uniform columns
  19. Kalender/Calendar
  20. Kalender
https://doi.org/10.3139/120.110729

Artikel in diesem Heft

  1. Inhalt/Contents
  2. Inhalt
  3. Fachbeiträge/Technical Contributions
  4. Effects of the thickness on the microstructure and corrosion behavior of a TiAlN film on 4140 steel
  5. The effect of anodizing conditions on the corrosion resistance of Ti6Al4V titanium alloy
  6. Frequency analysis of volumetric porosity in aluminum castings at high and low cooling rates
  7. Corrosion resistance of nanosilicasilicate conversion coatings on aluminum prepared by the dip immersion method
  8. Corrosion behavior of Haynes® 556® Fe-Ni-Cr-Co alloy for integrated coal gasification combined cycle syngas plants: A plant exposure study*
  9. Effects of Y2O3 and Al2O3 sintering additives on the hot pressing behavior of AlN ceramics
  10. Einfluss der Klebschichtdicke auf Kopplungsfaktor und Lebensdauer beim Bekleben von piezoelektrischen Flächenwandlern mit Epoxykleber
  11. Influence of the heat treatment on hardness and adhesive wear performance of Ni-P deposit with low phosphorus content
  12. Effect of plasma nitriding time on surface properties of hard chromium electroplated AISI 1010 steel
  13. Diffusion characteristics of plasma nitrided hard chromium on AISI 1010 steel
  14. Estimation of the mechanical properties of nanocomposites based on the properties prediction of single wall carbon nanotubes (SWCNT)
  15. Investigation of joints between polypropylene and polybutylene terephthalate
  16. Parametric optimization of seam welding of stainless steel (SS 304) sheets
  17. Effect of the powder particle size on the wear behavior of boronized AISI 304 stainless steel
  18. Optimum buckling design of axially layered graded uniform columns
  19. Kalender/Calendar
  20. Kalender
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 27.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/120.110729/html?lang=de
Button zum nach oben scrollen