On the interfacial chemistry of aryl diazonium compounds in polymer science

[1] Adenier, A., Barré, N., Cabet-Deliry, E., Chaussé, A., Griveau, S., Mercier, F., Pinson, J., & Vautrin-Ul, C. (2006a). Study of the spontaneous formation of organic layers on carbon and metal surfaces from diazonium salts. Surface Science, 600, 4801–4812. DOI: 10.1016/j.susc.2006.07.061. http://dx.doi.org/10.1016/j.susc.2006.07.06110.1016/j.susc.2006.07.061Suche in Google Scholar

[2] Adenier, A., Bernard, M. C., Chehimi, M. M., Cabet-Deliry, E., Desbat, B., Fagebaume, O., Pinson, J., & Podvorica, F. (2001). Covalent modification of iron surfaces by electrochemical reduction of aryldiazonium salts. Journal of the American Chemical Society, 123, 4541–4549. DOI: 10.1021/ja003276f. http://dx.doi.org/10.1021/ja003276f10.1021/ja003276fSuche in Google Scholar PubMed

[3] Adenier, A., Cabet-Deliry, E., Lalot, T., Pinson, J., & Podvorica, F. (2002). Attachment of polymers to organic moieties covalently bonded to iron surfaces. Chemistry of Materials, 14, 4576–4585. DOI: 10.1021/cm0211397. http://dx.doi.org/10.1021/cm021139710.1021/cm0211397Suche in Google Scholar

[4] Adenier, A., Combellas, C., Kanoufi, F., Pinson, J., & Podvorica, F. I. (2006b). Formation of polyphenylene films on metal electrodes by electrochemical reduction of benzenediazonium salts. Chemistry of Materials, 18, 2021–2029. DOI: 10.1021/cm052065c. http://dx.doi.org/10.1021/cm052065c10.1021/cm052065cSuche in Google Scholar

[5] Alchimedics Co. (2001). Presentation of the revolutionary BuMA drug eluting stent. Retrieved on November 2011 from: http://www.youtube.com/watch?v=cRPPhFWsyqI Suche in Google Scholar

[6] Almeida, I., Cascalheira, A. C., & Viana, A. S. (2010). One step gold (bio)functionalisation based on CS2-amine reaction. Electrochimica Acta, 55, 8686–8695. DOI: 10.1016/j.electacta.2010.07.084. http://dx.doi.org/10.1016/j.electacta.2010.07.08410.1016/j.electacta.2010.07.084Suche in Google Scholar

[7] Bahr, J. L., & Tour, J. M. (2001). Highly functionalized carbon nanotubes using in situ generated diazonium compounds. Chemistry of Materials, 13, 3823–3824. DOI: 10.1021/cm0109903. http://dx.doi.org/10.1021/cm010990310.1021/cm0109903Suche in Google Scholar

[8] Bahr, J. L., Yang, J., Kosynkin, D. V., Bronikowski, M. J., Smalley, R. E., & Tour, J. M. (2001). Functionalization of carbon nanotubes by electrochemical reduction of aryl diazonium salts: A bucky paper electrode. Journal of the American Chemical Society, 123, 6536–6542. DOI: 10.1021/ja010462s. http://dx.doi.org/10.1021/ja010462s10.1021/ja010462sSuche in Google Scholar PubMed

[9] Baranton, S., & Bélanger, D. (2005). Electrochemical derivatization of carbon surface by reduction of in situ generated diazonium cations. The Journal of Physical Chemistry B, 109, 24401–24410. DOI: 10.1021/jp054513+. http://dx.doi.org/10.1021/jp054513+10.1021/jp054513+Suche in Google Scholar PubMed

[10] Barbey, R., Lavanant, L., Paripovic, D., Schüwer, N., Sugnaux, C., Tugulu, S., & Klok, H. A. (2009). Polymer brushes via surface-initiated controlled radical polymerization: Synthesis, characterization, properties, and applications. Chemical Reviews, 109, 5437–5527. DOI: 10.1021/cr900045a. http://dx.doi.org/10.1021/cr900045a10.1021/cr900045aSuche in Google Scholar PubMed

[11] Barsbay, M., & Güven, O. (2009). A short review of radiation-induced raft-mediated graft copolymerization: A powerful combination for modifying the surface properties of polymers in a controlled manner. Radiation Physics and Chemistry, 78, 1054–1059. DOI: 10.1016/j.radphyschem.2009.06.022. http://dx.doi.org/10.1016/j.radphyschem.2009.06.02210.1016/j.radphyschem.2009.06.022Suche in Google Scholar

[12] Baskin, J. M., Prescher, J. A., Laughlin, S. T., Agard, N. J., Chang, P. V., Miller, I. A., Lo, A., Codelli, J. A., & Bertozzi, C. R. (2007). Copper-free click chemistry for dynamic in vivo imaging. Proceedings of the National Academy of Sciences of the United States of America, 104, 16793–16797. DOI: 10.1073/pnas.0707090104. http://dx.doi.org/10.1073/pnas.070709010410.1073/pnas.0707090104Suche in Google Scholar PubMed PubMed Central

[13] Bélanger, D., & Pinson, J. (2011). Electrografting: a powerful method for surface modification. Chemical Society Reviews, 40, 3995–4048. DOI: 10.1039/c0cs00149j. http://dx.doi.org/10.1039/c0cs00149j10.1039/c0cs00149jSuche in Google Scholar PubMed

[14] Bernard, M. C., Chaussé, A., Cabet-Deliry, E., Chehimi, M. M., Pinson, J., Podvorica, F., & Vautrin-Ul, C. (2003). Organic layers bonded to industrial, coinage, and noble metals through electrochemical reduction of aryldiazonium salts. Chemistry of Materials, 15, 3450–3462. DOI: 10.1021/cm034167d. http://dx.doi.org/10.1021/cm034167d10.1021/cm034167dSuche in Google Scholar

[15] Boukerma, K., Chehimi, M. M., Pinson, J., & Blomfield, C. (2003). X-ray photoelectron spectroscopy evidence for the covalent bond between an iron surface and aryl groups attached by the electrochemical reduction of diazonium salts. Langmuir, 19, 6333–6335. DOI: 10.1021/la030046g. http://dx.doi.org/10.1021/la030046g10.1021/la030046gSuche in Google Scholar

[16] Cabot Co. (2011). Carbon and pigment surface modification. Retrieved on November 2011 from http://www.cabotcorp.com/Research-and-Development/Particle-Design-For-Performance/Surface-Modification/GN200811251337PM2192/ Suche in Google Scholar

[17] Chen, R. J., Zhang, Y., Wang, D., & Dai, H. (2001). Noncovalent sidewall functionalization of single-walled carbon nanotubes for protein immobilization. Journal of the American Chemical Society, 123, 3838–3839. DOI: 10.1021/ja010172b. http://dx.doi.org/10.1021/ja010172b10.1021/ja010172bSuche in Google Scholar PubMed

[18] Chen, X., Yuan, L., Yang, P., Hu, J., & Yang, D. (2011). Covalent polymeric modification of graphene nanosheets via surface-initiated single-electron-transfer living radical polymerization. Journal of Polymer Science Part A: Polymer Chemistry, 49, 4977–4986. DOI: 10.1002/pola.24953. http://dx.doi.org/10.1002/pola.2495310.1002/pola.24953Suche in Google Scholar

[19] Combellas, C., Kanoufi, F., Pinson, J., & Podvorica, F. I. (2008). Sterically hindered diazonium salts for the grafting of a monolayer on metals. Journal of the American Chemical Society, 130, 8576–8577. DOI: 10.1021/ja8018912. http://dx.doi.org/10.1021/ja801891210.1021/ja8018912Suche in Google Scholar PubMed

[20] Coulon, E., Pinson, J., Bourzat, J. D., Commerçon, A., & Pulicani, J. P. (2002). Surface-modified carbon felts: possible supports for combinatorial chemistry. The Journal of Organic Chemistry, 67, 8513–8518. DOI: 10.1021/jo025880+. http://dx.doi.org/10.1021/jo025880+10.1021/jo025880+Suche in Google Scholar PubMed

[21] Dahoumane, S. A., Nguyen, M. N., Thorel, A., Boudou, J. P., Chehimi, M. M., & Mangeney, C. (2009). Protein-functionalized hairy diamond nanoparticles. Langmuir, 25, 9633–9638. DOI: 10.1021/la9009509. http://dx.doi.org/10.1021/la900950910.1021/la9009509Suche in Google Scholar PubMed

[22] Daou, T. J., Grenèche, J. M., Pourroy, G., Buathong, S., Derory, A., Ulhaq-Bouillet, C., Donnio, B., Guillon, D., & Begin-Colin, S. (2008). Coupling agent effect on magnetic properties of functionalized magnetite-based nanoparticles. Chemistry of Materials, 20, 5869–5875. DOI: 10.1021/cm801405n. http://dx.doi.org/10.1021/cm801405n10.1021/cm801405nSuche in Google Scholar

[23] Delamar, M., Désarmot, G., Fagebaume, O., Hitmi, R., Pinson, J., & Savéant, J. M. (1997). Modification of carbon fiber surfaces by electrochemical reduction of aryl diazonium salts: Application to carbon epoxy composites. Carbon, 35, 801–807. DOI: 10.1016/s0008-6223(97)00010-9. http://dx.doi.org/10.1016/S0008-6223(97)00010-910.1016/S0008-6223(97)00010-9Suche in Google Scholar

[24] Delamar, M., Hitmi, R., Pinson, J., & Savéant, J. M. (1992). Covalent modification of carbon surfaces by grafting of functionalized aryl radicals produced from electrochemical reduction of diazonium salts. Journal of the American Chemical Society, 114, 5883–5884. DOI: 10.1021/ja00040a074. http://dx.doi.org/10.1021/ja00040a07410.1021/ja00040a074Suche in Google Scholar

[25] Deniau, G., Azoulay, L., Bougerolles, L., & Palacin, S. (2006). Surface electroinitiated emulsion polymerization: Grafted organic coatings from aqueous solutions. Chemistry of Materials, 18, 5421–5428. DOI: 10.1021/cm060739t. http://dx.doi.org/10.1021/cm060739t10.1021/cm060739tSuche in Google Scholar

[26] Djouani, F., Herbst, F., Chehimi, M. M., & Benzarti, K. (2011). Synthesis, characterization and reinforcing properties of novel, reactive clay/poly(glycidyl methacrylate) nanocomposites. Construction and Building Materials, 25, 424–431. DOI: 10.1016/j.conbuildmat.2010.01.003. http://dx.doi.org/10.1016/j.conbuildmat.2010.01.00310.1016/j.conbuildmat.2010.01.003Suche in Google Scholar

[27] Doppelt, P., Hallais, G., Pinson, J., Podvorica, F., & Verneyre, S. (2007). Surface modification of conducting substrates. Existence of azo bonds in the structure of organic layers obtained from diazonium salts. Chemistry of Materials, 19, 4570–4575. DOI: 10.1021/cm0700551. http://dx.doi.org/10.1021/cm070055110.1021/cm0700551Suche in Google Scholar

[28] Dyer, D. J. (2006). Photoinitiated synthesis of grafted polymers. Advances in Polymer Science, 197, 47–65. DOI: 10.1007/12 064. http://dx.doi.org/10.1007/12_064Suche in Google Scholar

[29] Dyke, C. A., & Tour, J. M. (2003). Unbundled and highly functionalized carbon nanotubes from aqueous reactions. Nano Letters, 3, 1215–1218. DOI: 10.1021/nl034537x. http://dx.doi.org/10.1021/nl034537x10.1021/nl034537xSuche in Google Scholar

[30] Edmondson, S., Osborne, V. L., & Huck, W. T. S. (2004). Polymer brushes via surface-initiated polymerizations. Chemical Society Reviews, 33, 14–22. DOI: 10.1039/b210143m. http://dx.doi.org/10.1039/b210143m10.1039/b210143mSuche in Google Scholar PubMed

[31] Esteves, A. C. C., Bombalski, L., Trindade, T., Matyjaszewski, K., & Barros-Timmons, A. (2007). Polymer grafting from CdS quantum dots via AGET ATRP in miniemulsion. Small, 3, 1230–1236. DOI: 10.1002/smll.200600510. http://dx.doi.org/10.1002/smll.20060051010.1002/smll.200600510Suche in Google Scholar PubMed

[32] Fang, M., Wang, K., Lu, H., Yang, Y., & Nutt, S. (2009). Covalent polymer functionalization of graphene nanosheets and mechanical properties of composites. Journal of Materials Chemistry, 19, 7098–7105. DOI: 10.1039/b908220d. http://dx.doi.org/10.1039/b908220d10.1039/b908220dSuche in Google Scholar

[33] Fang, M., Wang, K., Lu, H., Yang, Y., & Nutt, S. (2010). Single-layer graphene nanosheets with controlled grafting of polymer chains. Journal of Materials Chemistry, 20, 1982–1992. DOI: 10.1039/b919078c. http://dx.doi.org/10.1039/b919078c10.1039/b919078cSuche in Google Scholar

[34] Flavel, B. S., Gross, A. J., Garrett, D. J., Nock, V., & Downard, A. J. (2010). A simple approach to patterned protein immobilization on silicon via electrografting from diazonium salt solutions. ACS Applied Materials & Interfaces, 2, 1184–1190. DOI: 10.1021/am100020a. http://dx.doi.org/10.1021/am100020a10.1021/am100020aSuche in Google Scholar PubMed

[35] Fontaine, O., Ghilane, J., Martin, P., Lacroix, J. C., & Randriamahazaka, H. (2010). Ionic liquid viscosity effects on the functionalization of electrode material through the electroreduction of diazonium. Langmuir, 26, 18542–18549. DOI: 10.1021/la103000u. http://dx.doi.org/10.1021/la103000u10.1021/la103000uSuche in Google Scholar PubMed

[36] Fu, G. D., Kang, E. T., & Neoh, K. G. (2010). Silane coupling agents for surface-initiated living polymerizations. In K. L. Mittal (Ed.), Silanes and other coupling agents (Vol. 5, pp. 261). Leiden, The Netherlands: Koninklijke Brill NV. DOI: 10.1163/ej.9789004165915.i-348.154. 10.1163/ej.9789004165915.i-348.154Suche in Google Scholar

[37] Gam-Derouich, S., Carbonnier, B., Turmine, M., Lang, P., Jouini, M., Ben Hassen-Chehimi, D., & Chehimi, M. M. (2010a). Electrografted aryl diazonium initiators for surface-confined photopolymerization: a new approach to designing functional polymer coatings. Langmuir, 26, 11830–11840. DOI: 10.1021/la100880j. http://dx.doi.org/10.1021/la100880j10.1021/la100880jSuche in Google Scholar PubMed

[38] Gam-Derouich, S., Gosecka, M., Lepinay, S., Turmine, M., Carbonnier, B., Basinska, T., Slomkowski, S., Millot, M. C., Othmane, A., Ben Hassen-Chehimi, D., & Chehimi, M. M. (2011a). Highly hydrophilic surfaces from polyglycidol grafts with dual antifouling and specific protein recognition properties. Langmuir, 27, 9285–9294. DOI: 10.1021/la200290k. 10.1021/la200290kSuche in Google Scholar PubMed

[39] Gam-Derouich, S., Jouini, M., Ben Hassen-Chehimi, D., & Chehimi, M. M. (2011b). Aryl diazonium salt surface chemistry and graft photopolymerization for the preparation of molecularly imprinted polymer biomimetic sensor layers. Electrochimica Acta, in press. DOI: 10.1016/j.electacta.2011.11.022. 10.1016/j.electacta.2011.11.022Suche in Google Scholar

[40] Gam-Derouich, S., Mahouche-Chergui, S., Truong, S., Ben Hassen-Chehimi, D., & Chehimi, M. M. (2011c). Design of molecularly imprinted polymer grafts with embedded gold nanoparticles through the interfacial chemistry of aryl diazonium salts. Polymer, 52, 4463–4470. DOI: 10.1016/j.polymer.2011.08.007. http://dx.doi.org/10.1016/j.polymer.2011.08.00710.1016/j.polymer.2011.08.007Suche in Google Scholar

[41] Gam-Derouich, S., Mahouche-Chergui, S., Turmine, M., Piquemal, J. Y., Ben Hassen-Chehimi, D., Omastová, M., & Chehimi, M. M. (2011d). A versatile route for surface modification of carbon, metals and semi-conductors by diazonium salt-initiated photopolymerization. Surface Science, 605, 1889–1899. DOI: 10.1016/j.susc.2011.06.029. http://dx.doi.org/10.1016/j.susc.2011.06.02910.1016/j.susc.2011.06.029Suche in Google Scholar

[42] Gam-Derouich, S., Nguyen, M. N., Madani, A., Maouche, N., Lang, P., Perruchot, C., & Chehimi, M. M. (2010b). Aryl diazonium salt surface chemistry and ATRP for the preparation of molecularly imprinted polymer grafts on gold substrates. Surface and Interface Analysis, 42, 1050–1056. DOI: 10.1002/sia.3210. http://dx.doi.org/10.1002/sia.321010.1002/sia.3210Suche in Google Scholar

[43] Gehan, H., Fillaud, L., Chehimi, M. M., Aubard, J., Hohenau, A., Felidj, N., & Mangeney, C. (2010). Thermo-induced electromagnetic coupling in gold/polymer hybrid plasmonic structures probed by surface-enhanced Raman scattering. ACS Nano, 4, 6491–6500. DOI: 10.1021/nn101451q. http://dx.doi.org/10.1021/nn101451q10.1021/nn101451qSuche in Google Scholar PubMed

[44] Girard, H. A., Arnault, J. C., Perruchas, S., Saada, S., Gacoin, T., Boilot, J. P., & Bergonzo, P. (2010). Hydrogenation of nanodiamonds using MPCVD: A new route toward organic functionalization. Diamond & Related Materials, 19, 1117–1123. DOI: 10.1016/j.diamond.2010.03.019. http://dx.doi.org/10.1016/j.diamond.2010.03.01910.1016/j.diamond.2010.03.019Suche in Google Scholar

[45] Gobitz, G. (1988). Immobilization of compounds for selective interaction with analytes in liquid chromatography. In R. W. Frei, & K. Zech (Eds.), Selective sample handling and detection in high-performance liquid chromatography (Chapter 3, pp. 145–207). Amsterdam, The Nederlands: Elsevier. DOI: 10.1016/s0301-4770(08)60379-6. http://dx.doi.org/10.1016/S0301-4770(08)60379-610.1016/S0301-4770(08)60379-6Suche in Google Scholar

[46] Han, J. H., & Yoon, J. Y. (2009). Reusable, polyethylene glycolstructured microfluidic channel for particle immunoassays. Journal of Biological Engineering, 3, 6. DOI: 10.1186/1754-1611-3-6. http://dx.doi.org/10.1186/1754-1611-3-610.1186/1754-1611-3-6Suche in Google Scholar PubMed PubMed Central

[47] Hauquier, F., Matrab, T., Kanoufi, F., & Combellas, C. (2009). Local direct and indirect reduction of electrografted aryldiazonium/gold surfaces for polymer brushes patterning. Electrochimica Acta, 54, 5127–5136. DOI: 10.1016/j.electacta.2009.01.059. http://dx.doi.org/10.1016/j.electacta.2009.01.05910.1016/j.electacta.2009.01.059Suche in Google Scholar

[48] He, H., Zhang, Y., Gao, C., & Wu, J. (2009). ’Clicked’ magnetic nanohybrids with a soft polymer interlayer. Chemical Communications, 2009, 1655–1657. DOI: 10.1039/b821280e. http://dx.doi.org/10.1039/b821280e10.1039/b821280eSuche in Google Scholar PubMed

[49] Hurley, B. L., & McCreery, R. L. (2004). Covalent bonding of organic molecules to Cu and Al alloy 2024 T3 surfaces via diazonium ion reduction. Journal of the Electrochemical Society, 151, B252–B259. DOI: 10.1149/1.1687428. http://dx.doi.org/10.1149/1.168742810.1149/1.1687428Suche in Google Scholar

[50] Iruthayaraj, J., Chernyy, S., Lillethorup, M., Ceccato, M., Røn, T., Hinge, M., Kingshott, P., Besenbacher, F., Uttrup Pedersen, S., & Daasbjerg, K. (2011). On surface-initiated atom transfer radical polymerization using diazonium chemistry to introduce the initiator layer. Langmuir, 27, 1070–1078. DOI: 10.1021/la104125n. http://dx.doi.org/10.1021/la104125n10.1021/la104125nSuche in Google Scholar PubMed

[51] Jiang, D. E., Sumpter, B. G., & Dai, S. (2006a). Structure and bonding between an aryl group and metal surfaces. Journal of the American Chemical Society, 128, 6030–6031. DOI: 10.1021/ja061439f. http://dx.doi.org/10.1021/ja061439f10.1021/ja061439fSuche in Google Scholar PubMed

[52] Jiang, D. E., Sumpter, B. G., & Dai, S. (2006b). How do aryl groups attach to a graphene sheet? The Journal of Physical Chemistry B, 110, 23628–23632. DOI: 10.1021/jp065980+. http://dx.doi.org/10.1021/jp065980+10.1021/jp065980Suche in Google Scholar

[53] Joselevich, M., & Williams, F. J. (2008). Synthesis and characterization of diazonium functionalized nanoparticles for deposition on metal surfaces. Langmuir, 24, 11711–11717. DOI: 10.1021/la802247k. http://dx.doi.org/10.1021/la802247k10.1021/la802247kSuche in Google Scholar PubMed

[54] Kozak, H., Remes, Z., Kromka, A., & Ledinsky, M. (2011). Optical characterisation of organosilane-modified nanocrystalline diamond films. Chemical Papers, 65, 36–41. DOI: 10.2478/s11696-010-0095-6. http://dx.doi.org/10.2478/s11696-010-0095-610.2478/s11696-010-0095-6Suche in Google Scholar

[55] Laurentius, L., Stoyanov, S. R., Gusarov, S., Kovalenko, A., Du, R., Lopinski, G. P., & McDermott, M. T. (2011). Diazonium-derived aryl films on gold nanoparticles: Evidence for a carbon-gold covalent bond. ACS Nano, 5, 4219–4227. DOI: 10.1021/nn201110r. http://dx.doi.org/10.1021/nn201110r10.1021/nn201110rSuche in Google Scholar PubMed

[56] Le, X. T., Viel, P., Jégou, P., Sorin, A., & Palacin, S. (2009). Electrochemical-switchable polymer film: An emerging technique for treatment of metallic ion aqueous waste. Separation and Purification Technology, 69, 135–140. DOI: 10.1016/j.seppur.2009.07.010. http://dx.doi.org/10.1016/j.seppur.2009.07.01010.1016/j.seppur.2009.07.010Suche in Google Scholar

[57] Lessant, J., Simic, V., Fantini, S., Raymond, P., & Viel, P. (2007). Conductive or semi-conductive material modified by electrochemical grafting of polymer films. PCT Patent Application, WO 2007/012630. Suche in Google Scholar

[58] Li, H., Cheng, F., Duft, A. M., & Adronov, A. (2005). Functionalization of single-walled carbon nanotubes with well-defined polystyrene by “click” coupling. Journal of the American Chemical Society, 127, 14518–14524. DOI: 10.1021/ja054958b. http://dx.doi.org/10.1021/ja054958b10.1021/ja054958bSuche in Google Scholar PubMed

[59] Liu, G., Böcking, T., & Gooding, J. J. (2007a). Diazonium salts: Stable monolayers on gold electrodes for sensing applications. Journal of Electroanalytical Chemistry, 600, 335–344. DOI: 10.1016/j.jelechem.2006.09.012. http://dx.doi.org/10.1016/j.jelechem.2006.09.01210.1016/j.jelechem.2006.09.012Suche in Google Scholar

[60] Liu, G., Luais, E., & Gooding, J. J. (2011). The fabrication of stable gold nanoparticle-modified interfaces for electrochemistry. Langmuir, 27, 4176–4183. DOI: 10.1021/la104373v. http://dx.doi.org/10.1021/la104373v10.1021/la104373vSuche in Google Scholar PubMed

[61] Liu, J., Rodriguez i Zubiri, M., Vigolo, B., Dossot, M., Humbert, B., Fort, Y., & McRae, E. (2007b). Microwave-assisted functionalization of single-wall carbon nanotubes through diazonium. Journal of Nanoscience and Nanotechnology, 7, 3519–3523. DOI: 10.1166/jnn.2007.819. http://dx.doi.org/10.1166/jnn.2007.81910.1166/jnn.2007.819Suche in Google Scholar PubMed

[62] Liu, T. Q., Casado-Portilla, R., Belmont, J., & Matyjaszewski, K. (2005). ATRP of butyl acrylates from functionalized carbon black surfaces. Journal of Polymer Science A: Polymer Chemistry, 43, 4695–4709. DOI: 10.1002/pola.20931. http://dx.doi.org/10.1002/pola.2093110.1002/pola.20931Suche in Google Scholar

[63] Liu, T., Jia, S., Kowalewski, T., & Matyjaszewski, K. (2003). Grafting poly(n-butyl acrylate) from a functionalized carbon black surface by atom transfer radical polymerization. Langmuir, 19, 6342–6345. DOI: 10.1021/la034219d. http://dx.doi.org/10.1021/la034219d10.1021/la034219dSuche in Google Scholar

[64] Liu, T., Jia, S., Kowalewski, T., & Matyjaszewski, K. (2006). Water-dispersible carbon black nanocomposites prepared by surface-initiated atom transfer radical polymerization in protic media. Macromolecules, 39, 548–556. DOI: 10.1021/ma 051659y. http://dx.doi.org/10.1021/ma051659ySuche in Google Scholar

[65] Love, J. C., Estroff, L. A., Kriebel, J. K., Nuzzo, R. G., & Whitesides, G. M. (2005). Self-assembled monolayers of thiolates on metals as a form of nanotechnology. Chemical Reviews, 105, 1103–1170. DOI: 10.1021/cr0300789. http://dx.doi.org/10.1021/cr030078910.1021/cr0300789Suche in Google Scholar PubMed

[66] Mahouche Chergui, S., Abbas, N., Matrab, T., Turmine, M., Bon Nguyen, E., Losno, R., Pinson, J., & Chehimi, M. M. (2010a). Uptake of copper ions by carbon fiber/polymer hybrids prepared by tandem diazonium salt chemistry and in situ atom transfer radical polymerization. Carbon, 48, 2106–2111. DOI: 10.1016/j.carbon.2010.01.050. http://dx.doi.org/10.1016/j.carbon.2010.01.05010.1016/j.carbon.2010.01.050Suche in Google Scholar

[67] Mahouche, S., Mekni, N., Abbassi, L., Lang, P., Perruchot, C., Jouini, M., Mammeri, F., Turmine, M., Ben Romdhane, H., & Chehimi, M. M. (2009). Tandem diazonium salt electroreduction and click chemistry as a novel, efficient route for grafting macromolecules to gold surface. Surface Science, 603, 3205–3211. DOI: 10.1016/j.susc.2009.09.004. http://dx.doi.org/10.1016/j.susc.2009.09.00410.1016/j.susc.2009.09.004Suche in Google Scholar

[68] Mahouche-Chergui, S., Gam-Derouich, S., Mangeney, C., & Chehimi, M. M. (2011). Aryl diazonium salts: a new class of coupling agents for bonding polymers, biomacromolecules and nanoparticles to surfaces. Chemical Society Reviews, 40, 4143–4166. DOI: 10.1039/c0cs00179a. http://dx.doi.org/10.1039/c0cs00179a10.1039/c0cs00179aSuche in Google Scholar PubMed

[69] Mahouche-Chergui, S., Ledebt, A., Mammeri, F., Herbst, F., Carbonnier, B., Ben Romdhane, H., Delamar, M., & Chehimi, M. M. (2010b). Hairy carbon nanotube@nano-Pd heterostructures: Design, characterization, and application in Suzuki C-C coupling reaction. Langmuir, 26, 16115–16121. DOI: 10.1021/la102801d. http://dx.doi.org/10.1021/la102801d10.1021/la102801dSuche in Google Scholar PubMed

[70] Mangeney, C., Qin, Z., Dahoumane, S. A., Adenier, A., Herbst, F., Boudou, J. P., Pinson, J., & Chehimi, M. M. (2008). Electroless ultrasonic functionalization of diamond nanoparticles using aryl diazonium salts. Diamond & Related Materials, 17, 1881–1887. DOI: 10.1016/j.diamond.2008.04.003. http://dx.doi.org/10.1016/j.diamond.2008.04.00310.1016/j.diamond.2008.04.003Suche in Google Scholar

[71] Marcoux, P. R., Hapiot, P., Batail, P., & Pinson, J. (2004). Electrochemical functionalization of nanotube films: growth of aryl chains on single-walled carbon nanotubes. New Journal of Chemistry, 28, 302–307. DOI: 10.1039/b309509f. http://dx.doi.org/10.1039/b309509f10.1039/b309509fSuche in Google Scholar

[72] Matrab, T., Chancolon, J., Mayne L’Hermite, M., Rouzaud, J. N., Deniau, G., Boudou, J. P., Chehimi, M. M., & Delamar, M. (2006a). Atom transfer radical polymerization (ATRP) initiated by aryl diazonium salts: a new route for surface modification of multiwalled carbon nanotubes by tethered polymer chains. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 287, 217–221. DOI: 10.1016/j.colsurfa.2006.05.028. http://dx.doi.org/10.1016/j.colsurfa.2006.05.02810.1016/j.colsurfa.2006.05.028Suche in Google Scholar

[73] Matrab, T., Chehimi, M. M., Boudou, J. P., Benedic, F., Wang, J., Naguib, N. N., & Carlisle, J. A. (2006b). Surface functionalization of ultrananocrystalline diamond using atom transfer radical polymerization (ATRP) initiated by electro-grafted aryldiazonium salts. Diamond and Related Materials, 15, 639–644. DOI: 10.1016/j.diamond.2005.11.024. http://dx.doi.org/10.1016/j.diamond.2005.11.02410.1016/j.diamond.2005.11.024Suche in Google Scholar

[74] Matrab, T., Chehimi, M. M., Perruchot, C., Adenier, A., Guillez, V., Save, M., Charleux, B., Cabet-Deliry, E., & Pinson, J. (2005). Novel approach for metallic surface-initiated atom transfer radical polymerization using electrografted initiators based on aryl diazonium salts. Langmuir, 21, 4686–4694. DOI: 10.1021/la046912m. http://dx.doi.org/10.1021/la046912m10.1021/la046912mSuche in Google Scholar PubMed

[75] Matrab, T., Chehimi, M. M., Pinson, J., Slomkowski, S., & Basinska, T. (2006c). Growth of polymer brushes by atom transfer radical polymerization on glassy carbon modified by electro-grafted initiators based on aryl diazonium salts. Surface and Interface Analysis, 38, 565–568. DOI: 10.1002/sia.2194. http://dx.doi.org/10.1002/sia.219410.1002/sia.2194Suche in Google Scholar

[76] Matrab, T., Hauquier, F., Combellas, C., & Kanoufi, F. (2010). Scanning electron microscopy investigation of molecular transport and reactivity within polymer brushes. ChemPhys Chem: A European Journal of Chemical Physics and Physical Chemistry, 11, 670–682. DOI: 10.1002/cphc.200900766. http://dx.doi.org/10.1002/cphc.20090076610.1002/cphc.200900766Suche in Google Scholar PubMed

[77] Matrab, T., Nguyen, M. N., Mahouche, S., Lang, P., Badre, C., Turmine, M., Girard, G., Bai, J., & Chehimi, M. M. (2008). Aryl diazonium salts for carbon fibers surface-initiated atom transfer radical polymerization. The Journal of Adhesion, 84, 684–701. DOI: 10.1080/00218460802352645. http://dx.doi.org/10.1080/0021846080235264510.1080/00218460802352645Suche in Google Scholar

[78] Matrab, T., Save, M., Charleux, B., Pinson, J., Cabet-Deliry, E., Adenier, A., Chehimi, M. M., & Delamar, M. (2007). Grafting densely-packed poly(n-butyl methacrylate) chains from an iron substrate by aryl diazonium surface-initiated ATRP: XPS monitoring. Surface Science, 601, 2357–2366. DOI: 10.1016/j.susc.2007.03.046. http://dx.doi.org/10.1016/j.susc.2007.03.04610.1016/j.susc.2007.03.046Suche in Google Scholar

[79] Matyjaszewski, K., Miller, P. J., Shukla, N., Immaraporn, B., Gelman, A., Luokala, B. B., Siclovan, T. M., Kickelbick, G., Vallant, T., Hoffmann, H., & Pakula, T. (1999). Polymers at interfaces: using atom transfer radical polymerization in the controlled growth of homopolymers and block copolymers from silicon surfaces in the absence of untethered sacrificial initiator. Macromolecules, 32, 8716–8724. DOI: 10.1021/ma991146p. http://dx.doi.org/10.1021/ma991146p10.1021/ma991146pSuche in Google Scholar

[80] Mesnage, A., Abdel Magied, M., Simon, P., Herlin-Boime, N., Jégou, P., Deniau, G., & Palacin, S. (2011). Grafting polymers to titania nanoparticles by radical polymerization initiated by diazonium salt. Journal of Materials Science, 46, 6332–6338. DOI: 10.1007/s10853-011-5709-z. http://dx.doi.org/10.1007/s10853-011-5709-z10.1007/s10853-011-5709-zSuche in Google Scholar

[81] Mesnage, A., Esnouf, S., Jégou, P., Deniau, G., & Palacin, S. (2010). Understanding the redox-induced polymer grafting process: A dual surface-solution analysis. Chemistry of Materials, 22, 6229–6239. DOI: 10.1021/cm1014702. http://dx.doi.org/10.1021/cm101470210.1021/cm1014702Suche in Google Scholar

[82] Mévellec, V., Roussel, S., Tessier, L., Chancolon, J., Mayne-L’Hermite, M., Deniau, G., Viel, P., & Palacin, S. (2007). Grafting polymers on surfaces: A new powerful and versatile diazonium salt-based one-step process in aqueous media. Chemistry of Materials, 19, 6323–6330. DOI: 10.1021/cm071 371i. http://dx.doi.org/10.1021/cm071371iSuche in Google Scholar

[83] Mirkhalaf, F., Mason, T. J., Morgan, D. J., & Saez, V. (2011). Frequency effects on the surface coverage of nitrophenyl films ultrasonically grafted onto indium tin oxide. Langmuir, 27, 1853–1858. DOI: 10.1021/la104402z. http://dx.doi.org/10.1021/la104402z10.1021/la104402zSuche in Google Scholar PubMed

[84] Moses, J. E., & Moorhouse, A. D. (2007). The growing applications of click chemistry. Chemical Society Reviews, 36, 1249–1262. DOI: 10.1039/b613014n. http://dx.doi.org/10.1039/b613014n10.1039/B613014NSuche in Google Scholar

[85] Mrabet, B., Mejbri, A., Mahouche, S., Gam-Derouich, S., Turmine, M., Mechouet, M., Lang, P., Bakala, H., Ladjimi, M., Bakhrouf, A., Tougaard, S., & Chehimi, M. M. (2011). Controlled adhesion of Salmonella Typhimurium to poly(oligoethylene glycol methacrylate) grafts. Surface and Interface Analysis, 43, 1436–1443. DOI: 10.1002/sia.3741. http://dx.doi.org/10.1002/sia.374110.1002/sia.3741Suche in Google Scholar

[86] Nguyen, M. N., Matrab, T., Badre, C., Turmine, M., & Chehimi, M. M. (2008). Interfacial aspects of polymer brushes prepared on conductive substrates by aryl diazonium salt surface-initiated ATRP. Surface and Interface Analysis, 40, 412–417. DOI: 10.1002/sia.2687. http://dx.doi.org/10.1002/sia.268710.1002/sia.2687Suche in Google Scholar

[87] Pan, Y., Tong, B., Shi, J., Zhao, W., Shen, J., Zhi, J., & Dong, Y. (2010). Fabrication, characterization, and optoelectronic properties of layer-by-layer films based on terpyridine-modified MWCNTs and ruthenium(III) ions. The Journal of Physical Chemistry C, 114, 8040–8047. DOI: 10.1021/jp909904t. http://dx.doi.org/10.1021/jp909904t10.1021/jp909904tSuche in Google Scholar

[88] Pandurangappa, M., Ramakrishnappa, T., & Compton, R. G. (2009). Functionalization of glassy carbon spheres by ball milling of aryl diazonium salts. Carbon, 47, 2186–2193. DOI: 10.1016/j.carbon.2009.03.068. http://dx.doi.org/10.1016/j.carbon.2009.03.06810.1016/j.carbon.2009.03.068Suche in Google Scholar

[89] Petrov, P., Stassin, F., Pagnoulle, C., & Jérôme, R. (2003). Noncovalent functionalization of multi-walled carbon nanotubes by pyrene containing polymers. Chemical Communications, 2904–2905. DOI: 10.1039/b307751a. 10.1039/B307751ASuche in Google Scholar

[90] Pinson, J., & Podvorica, F. (2005). Attachment of organic layers to conductive or semiconductive surfaces by reduction of diazonium salts. Chemical Society Reviews, 34, 429–439. DOI: 10.1039/b406228k. http://dx.doi.org/10.1039/b406228k10.1039/b406228kSuche in Google Scholar PubMed

[91] Qin, S., Qin, D., Ford, W. T., Resasco, D. E., & Herrera, J. E. (2004). Polymer brushes on single-walled carbon nanotubes by atom transfer radical polymerization of n-butyl methacrylate. Journal of the American Chemical Society, 126, 170–176. DOI: 10.1021/ja037937v. http://dx.doi.org/10.1021/ja037937v10.1021/ja037937vSuche in Google Scholar PubMed

[92] Ratheesh Kumar, V. K., & Gopidas, K. R. (2010). Synthesis and characterization of gold-nanoparticle-cored dendrimers stabilized by metal-carbon bonds. Chemistry — An Asian Journal, 5, 887–896. DOI: 10.1002/asia.200900388. http://dx.doi.org/10.1002/asia.20090038810.1002/asia.200900388Suche in Google Scholar PubMed

[93] Ratheesh Kumar, V. K., & Gopidas, K. R. (2011). Palladium nanoparticle-cored-G1-dendrimer stabilized by carbon-Pd bonds: synthesis, characterization and use as chemoselective, room temperature hydrogenation catalyst. Tetrahedron Letters, 52, 3102–3105. DOI: 10.1016/j.tetlet.2011.04.011. http://dx.doi.org/10.1016/j.tetlet.2011.04.01110.1016/j.tetlet.2011.04.011Suche in Google Scholar

[94] Santos, L. M., Ghilane, J., Fave, C., Lacaze, P. C., Randriamahazaka, H., Abrantes, L. M., & Lacroix, J. C. (2008). Electrografting polyaniline on carbon through the electroreduction of diazonium salts and the electrochemical polymerization of aniline. The Journal of Physical Chemistry C, 112, 16103–16109. DOI: 10.1021/jp8042818. http://dx.doi.org/10.1021/jp804281810.1021/jp8042818Suche in Google Scholar

[95] Selvaraj, V., & Alagar, M. (2007). Pt and Pt-Ru nanoparticles decorated polypyrrole/multiwalled carbon nanotubes and their catalytic activity towards methanol oxidation. Electrochemistry Communications, 9, 1145–1153. DOI: 10.1016/j.elecom.2007.01.011. http://dx.doi.org/10.1016/j.elecom.2007.01.01110.1016/j.elecom.2007.01.011Suche in Google Scholar

[96] Shaulov, Y., Okner, R., Levi, Y., Tal, N., Gutkin, V., Mandler, D., & Domb, A. J. (2009). Poly(methyl methacrylate) grafting onto stainless steel surfaces: Application to drug-eluting stents. ACS Applied Materials & Interfaces, 1, 2519–2528. DOI: 10.1021/am900465t. http://dx.doi.org/10.1021/am900465t10.1021/am900465tSuche in Google Scholar PubMed

[97] Shewchuk, D. M., & McDermott, M. T. (2009). Comparison of diazonium salt derived and thiol derived nitrobenzene layers on gold. Langmuir, 25, 4556–4563. DOI: 10.1021/la8040083. http://dx.doi.org/10.1021/la804008310.1021/la8040083Suche in Google Scholar PubMed

[98] Simionescu, C. I., & Dimitriu, S. (1972). Grafting of cellulose and derivatives by means of diazonium salts. Journal of Polymer Science Part C: Polymer Symposia, 37, 187–203. DOI: 10.1002/polc.5070370111. http://dx.doi.org/10.1002/polc.507037011110.1002/polc.5070370111Suche in Google Scholar

[99] Simionescu, C., Popa, M. I., & Dimitriu, S. (1987). Bioactive polymers XXX. Immobilization of invertase on the diazonium salt of 4-aminobenzoylcellulose. Biotechnology and Bioengineering, 29, 361–365. DOI: 10.1002/bit.260290312. http://dx.doi.org/10.1002/bit.26029031210.1002/bit.260290312Suche in Google Scholar PubMed

[100] Steenackers, M., Küller, A., Stoycheva, S., Grunze, M., & Jordan, R. (2009). Structured and gradient polymer brushes from biphenylthiol self-assembled monolayers by self-initiated photografting and photopolymerization (SIPGP). Langmuir, 25, 2225–2231. DOI: 10.1021/la803386c. http://dx.doi.org/10.1021/la803386c10.1021/la803386cSuche in Google Scholar PubMed

[101] Stockhausen, V., Ghilane, J., Martin, P., Trippé-Allard, G., Randriamahazaka, H., & Lacroix, J. C. (2009). Grafting oligothiophenes on surfaces by diazonium electroreduction: A step toward ultrathin junction with well-defined metal/oligomer interface. Journal of the American Chemical Society, 131, 14920–14927. DOI: 10.1021/ja9047009. http://dx.doi.org/10.1021/ja904700910.1021/ja9047009Suche in Google Scholar PubMed

[102] Sun, G., Hovestädt, M., Zhang, X., Hinrichs, K., Rosu, D. M., Lauermann, I., Zielke, C., Vollmer, A., Löchel, H., Ay, B., Holzhütter, H. G., Schade, U., Esser, N., Volkmer, R., & Rappich, J. (2011). Infrared spectroscopic ellipsometry (IRSE) and X-ray photoelectron spectroscopy (XPS) monitoring the preparation of maleimide-functionalized surfaces: from Au towards Si (111). Surface and Interface Analysis, 43, 1203–1210. DOI: 10.1002/sia.3699. http://dx.doi.org/10.1002/sia.369910.1002/sia.3699Suche in Google Scholar

[103] Suryanarayanan, V., Wu, C. T., & Ho, K. C. (2010). Molecularly imprinted electrochemical sensors. Electroanalysis, 22, 1795–1811. DOI: 10.1002/elan.200900616. http://dx.doi.org/10.1002/elan.20090061610.1002/elan.200900616Suche in Google Scholar

[104] Tasdelen, M. A., Moszner, N., & Yagci, Y. (2009). The use of poly(ethylene oxide) as hydrogen donor in type II photoinitiated free radical polymerization. Polymer Bulletin, 63, 173–183. DOI: 10.1007/s00289-009-0079-2. http://dx.doi.org/10.1007/s00289-009-0079-210.1007/s00289-009-0079-2Suche in Google Scholar

[105] Tessier, L., Deniau, G., Charleux, B., & Palacin, S. (2009). Surface electroinitiated emulsion polymerization (SEEP): A mechanistic approach. Chemistry of Materials, 21, 4261–4274. DOI: 10.1021/cm901430t. http://dx.doi.org/10.1021/cm901430t10.1021/cm901430tSuche in Google Scholar

[106] Toupin, M., & Bélanger, D. (2007). Thermal stability study of aryl modified carbon black by in situ generated diazonium salt. The Journal of Physical Chemistry C, 111, 5394–5401. DOI: 10.1021/jp066868e. http://dx.doi.org/10.1021/jp066868e10.1021/jp066868eSuche in Google Scholar

[107] Tour, J. M., Hudson, J. L., Krishnamoorti, R., Yurelki, K., & Mitchell, C. A. (2005). Patent No. WO05030858A3. New York, NY, USA: World Intellectual Property Organization. Suche in Google Scholar

[108] Walter, P. (2003). Silane and other adhesion promoters in adhesive technology. In A. Pizzi, & K. L. Mittal (Eds.), Handbook of adhesive technology (2nd ed., pp. 205–221). New York, NY, USA: Marcel Dekker. Suche in Google Scholar

[109] Wang, G. J., Huang, S. Z., Wang, Y., Liu, L., Qiu, J., & Li, Y. (2007). Synthesis of water-soluble single-walled carbon nanotubes by RAFT polymerization. Polymer, 48, 728–733. DOI: 10.1016/j.polymer.2006.12.024. http://dx.doi.org/10.1016/j.polymer.2006.12.02410.1016/j.polymer.2006.12.024Suche in Google Scholar

[110] Wang, J., & Carlisle, J. A. (2006). Covalent immobilization of glucose oxidase on conducting ultrananocrystalline diamond thin films. Diamond and Related Materials, 15, 279–284. DOI: 10.1016/j.diamond.2005.09.017. http://dx.doi.org/10.1016/j.diamond.2005.09.01710.1016/j.diamond.2005.09.017Suche in Google Scholar

[111] Wu, W., Tsarevsky, N. V., Hudson, J. L., Tour, J. M., Matyjaszewski, K., & Kowalewski, T. (2007). “Hairy” single-walled carbon nanotubes prepared by atom transfer radical polymerization. Small, 3, 1803–1810. DOI: 10.1002/smll.200600688. http://dx.doi.org/10.1002/smll.20060068810.1002/smll.200600688Suche in Google Scholar PubMed

[112] Yagci, Y., Jockusch, S., & Turro, N. J. (2010). Photoinitiated polymerization: Advances, challenges, and opportunities. Macromolecules, 43, 6245–6260. DOI: 10.1021/ma1007545. http://dx.doi.org/10.1021/ma100754510.1021/ma1007545Suche in Google Scholar

[113] Zhang, Y., Xue, Y., & Yu, M. (2011). Hydrothermal synthesis of core-shell structured PS@GdPO4:Tb3+/Ce3+ spherical particles and their luminescence properties. Chemical Papers, 65, 29–35. DOI: 10.2478/s11696-010-0088-5. http://dx.doi.org/10.2478/s11696-010-0088-510.2478/s11696-010-0088-5Suche in Google Scholar