Abstract
Energy dispersive X-ray spectroscopy and scanning electron microscopy were used to analyse nickel on anodic aluminium surfaces after stripping the anodic aluminium oxide. The metal was electroplated at the bottom of the pores of anodised aluminium during electrolytic colouring in solutions without (Watts) and with (citrate) complexing agents, respectively. A relation between the anodic-cathodic processes, changes of the structure and composition of the coating in dependence on the used solution were studied. A morphology study performed after stripping the anodic aluminium oxide revealed the crucial influence of the anodic process/cycle and the complexing agent on the nickel structure on the aluminium surface. Off-time of half-way rectified current influenced the nickel deposition in the pores of anodic alumina negatively.
[1] Arurault, L., Salmi, J., & Bes, R. S. (2004). Comparison of AC voltage and periodic reverse current nickel pigmented anodized aluminium as solar selective absorber. Solar Energy Materials & Solar Cells, 82, 447–455. DOI: 10.1016/j.solmat.2004.02.002. http://dx.doi.org/10.1016/j.solmat.2004.02.00210.1016/j.solmat.2004.02.002Suche in Google Scholar
[2] Bockris, J. O’M., & Razumney, G. A. (1967). Fundamental aspects of electrocrystallization. New York: Plenum Press. 10.1007/978-1-4684-0697-9Suche in Google Scholar
[3] Bostrom, T., Wäckelgard, E., & Westin, G. (2003). Solution-chemical derived nickel-alumina coatings for thermal solar absorbers. Solar Energy, 74, 497–503. DOI: 10.1016/S0038-092X(03)00199-3. http://dx.doi.org/10.1016/S0038-092X(03)00199-310.1016/S0038-092X(03)00199-3Suche in Google Scholar
[4] Brace, A. W., & Sheasby, P. G. (1979). The technology of anodizing aluminum. (2nd ed.). Stonehouse, UK: Technicopy Ltd. Suche in Google Scholar
[5] Cegedur, G. P. (1973). GB Patent No. 1311972. London: The Patent Office. Suche in Google Scholar
[6] Dionisio, R. (1983). US Patent No. 4421610. Washington, D.C.: U.S. Patent and Trademark Office. Suche in Google Scholar
[7] Doughty, A. S., Thompson, G. E., Richardson, J. A., & Wood, G. C. (1975). Investigation of the electrolytic colouring of porous anodic films on aluminium using electron microscopy. Transactions of the Institute of Metal Finishing, 53, 33–39. 10.1080/00202967.1975.11870335Suche in Google Scholar
[8] Fairchild, M. D. (2005). Color and image appearance models. Chichester: Wiley. Suche in Google Scholar
[9] Furneaux, R. C. (1983). Use of electron microscopy in studies of electrolytically colored anodized aluminium. Transactions of the Institute of Metal Finishing, 61, 35–40. 10.1080/00202967.1983.11870633Suche in Google Scholar
[10] Gedde, O. C. (1971). GB Patent No. 1257047. London: The Patent Office. Suche in Google Scholar
[11] Henley, V. F. (1982). Anodic oxidation of aluminum and its alloys. Oxford: Pergamon Press. Suche in Google Scholar
[12] Kadirgan, F., Söhmen, M., Türe, I. E., Süzer, Ş., Wetherilt, J., & Yazar, A. (1997). An investigation on the optimisation of electrochemically pigmented aluminium oxide selective collector coatings. Renewable Energy, 10, 203–206. DOI: 10.1016/0960-1481(96)00064-X. http://dx.doi.org/10.1016/0960-1481(96)00064-X10.1016/0960-1481(96)00064-XSuche in Google Scholar
[13] Landolt, D., & Marlot, A. (2003). Microstructure and composition of pulse-plated metals and alloys. Surface & Coatings Technology, 169–170, 8–13. DOI: 10.1016/S0257-8972(03)00042-2. http://dx.doi.org/10.1016/S0257-8972(03)00042-210.1016/S0257-8972(03)00042-2Suche in Google Scholar
[14] Nielsch, K., Müuller, F., Li, A.-P., & Gösele, U. (2000). Uniform nickel deposition into ordered alumina pores by pulsed electrodeposition. Advanced Materials, 12, 582–586. DOI: 10.1002/(SICI)1521-4095(200004)12:8<582::AID-ADMA582>3.0.CO;2-3. http://dx.doi.org/10.1002/(SICI)1521-4095(200004)12:8<582::AID-ADMA582>3.0.CO;2-310.1002/(SICI)1521-4095(200004)12:8<582::AID-ADMA582>3.0.CO;2-3Suche in Google Scholar
[15] Salmi, J., Bonino, J.-P., & Bes, R. S. (2000). Nickel pigmented anodized aluminium as solar selective absorbers. Journal of Materials Science, 35, 1347–1351. DOI: 10.1023/A: 1004773821962. http://dx.doi.org/10.1023/A:100477382196210.1023/A:1004773821962Suche in Google Scholar
[16] Sato, T. (1991). Mechanism of electrolytic coloring of anodised aluminium. Plating Surface Finishing, 3, 70–73. Suche in Google Scholar
[17] Sato, T., & Sakai, S. (1979). Electrolytic colouring of anodized aluminium with nickel sulphate. Transactions of the Institute of Metal Finishing, 57, 43–47. 10.1080/00202967.1979.11870482Suche in Google Scholar
[18] Serebrennikova, I., Vanýsek, P., & Birss, V. I. (1997). Characterization of porous aluminum oxide films by metal electrodeposition. Electrochimica Acta, 42, 145–151. DOI: 10.1016/0013-4686(96)00184-3. http://dx.doi.org/10.1016/0013-4686(96)00184-310.1016/0013-4686(96)00184-3Suche in Google Scholar
[19] Tsangaraki-Kaplanoglou, I., Theohari, S., Dimogerontakis, Th., Kallithrakas-Kontos, N., Wang, Y.-M., Kuo, H.-H., & Kia, S. (2006). An investigation of electrolytic coloring process of anodized aluminum coatings. Surface and Coatings Technology, 201, 2749–2759. DOI: 10.1016/j.surfcoat.2006.05.027. http://dx.doi.org/10.1016/j.surfcoat.2006.05.02710.1016/j.surfcoat.2006.05.027Suche in Google Scholar
[20] Wernick, S., Pinner, R., & Sheasby, P. G. (1987). The surface treatment and finishing of aluminum and its alloys (5th ed.). Teddington: Finishing Publications/ASM. Suche in Google Scholar
© 2008 Institute of Chemistry, Slovak Academy of Sciences
Artikel in diesem Heft
- Polymer interfaces used in electrochemical DNA-based biosensors
- Integration of biomass drying with combustion/gasification technologies and minimization of emissions of organic compounds
- Application of hydrocolloids as baking improvers
- Simultaneous determination of 118 pesticide residues in Chinese teas by gas chromatography-mass spectrometry
- Modifications of spectrophotometric methods for total phosphorus determination in meat samples
- Modification and characterization of montmorillonite fillers used in composites with vulcanized natural rubber
- A new approach to nickel electrolytic colouring of anodised aluminium
- Solvent-free synthesis and properties of carboxymethyl starch fatty acid ester derivatives
- Reduction of silver nitrate by polyaniline nanotubes to produce silver-polyaniline composites
- Chemometrical analysis of computed QSAR parameters and their use in biological activity prediction
- Mild and efficient conversion of trifluoromethylarenes into tribromomethylarenes using boron tribromide
- 1,3-Dibromo-5,5-dimethylhydantoin as a useful reagent for efficient synthesis of 3,4-dihydropyrimidin-2-(1H)-ones under solvent-free conditions
- A new xanthone from the roots of Securidaca inappendiculata
Artikel in diesem Heft
- Polymer interfaces used in electrochemical DNA-based biosensors
- Integration of biomass drying with combustion/gasification technologies and minimization of emissions of organic compounds
- Application of hydrocolloids as baking improvers
- Simultaneous determination of 118 pesticide residues in Chinese teas by gas chromatography-mass spectrometry
- Modifications of spectrophotometric methods for total phosphorus determination in meat samples
- Modification and characterization of montmorillonite fillers used in composites with vulcanized natural rubber
- A new approach to nickel electrolytic colouring of anodised aluminium
- Solvent-free synthesis and properties of carboxymethyl starch fatty acid ester derivatives
- Reduction of silver nitrate by polyaniline nanotubes to produce silver-polyaniline composites
- Chemometrical analysis of computed QSAR parameters and their use in biological activity prediction
- Mild and efficient conversion of trifluoromethylarenes into tribromomethylarenes using boron tribromide
- 1,3-Dibromo-5,5-dimethylhydantoin as a useful reagent for efficient synthesis of 3,4-dihydropyrimidin-2-(1H)-ones under solvent-free conditions
- A new xanthone from the roots of Securidaca inappendiculata