Statistical Law and Predictive Analysis of Compressive Strength of Cemented Sand and Gravel

Articles in the same Issue

1. Regular Articles
2. Microstructure and compressive behavior of lamellar Al₂O₃p/Al composite prepared by freeze-drying and mechanical-pressure infiltration method
3. Al₃Ti/ADC12 Composite Synthesized by Ultrasonic Chemistry in Situ Reaction
4. Microstructure and photocatalytic performance of micro arc oxidation coatings after heat treatment
5. The effect of carbon nanotubes on the mechanical and damping properties of macro-defect-free cements
6. Toughening Mechanism of the Bone — Enlightenment from the Microstructure of Goat Tibia
7. Characterization of PVC/MWCNTs Nanocomposite: Solvent Blend
8. Study on Macroscopic and Mesoscopic Mechanical Behavior of CSG based on Inversion of Mesoscopic Material Parameters
9. Bearing properties and influence laws of concrete-filled steel tubular arches for underground mining roadway support
10. Comparing Test Methods for the Intra-ply Shear Properties of Uncured Prepreg Tapes
11. Investigation of Microstructural, Mechanical and Corrosion Properties of AA7010-TiB₂ in-situ Metal Matrix Composite
12. A Comparative Study of Structural Changes in Conventional and Unconventional Machining and Mechanical Properties Evaluation of Polypropylene Based Self Reinforced Composites
13. Research on Influence mechanism of composite interlaminar shear strength under normal stress
14. Mechanical properties of geopolymer foam at high temperature
15. Synthesis and mechanical properties of nano-Sb₂O₃/BPS-PP composites
16. Multiscale acoustic emission of C/SiC mini-composites and damage identification using pattern recognition
17. Modifying mechanical properties of Shanghai clayey soil with construction waste and pulverized lime
18. Relationship between Al₂O₃ Content and Wear Behavior of Al+2% Graphite Matrix Composites
19. Static mechanical properties and mechanism of C200 ultra-high performance concrete (UHPC) containing coarse aggregates
20. A Parametric Study on the Elliptical hole Effects of Laminate Composite Plates under Thermal Buckling Load
21. Morphology and crystallization kinetics of Rubber-modified Nylon 6 Prepared by Anionic In-situ Polymerization
22. Effects of Elliptical Hole on the Correlation of Natural Frequency with Buckling Load of Basalt Laminates Composite Plates
23. Effect of interphase parameters on elastic modulus prediction for cellulose nanocrystal fiber reinforced polymer composite
24. Mixed Matrix Membranes prepared from polysulfone and Linde Type A zeolite
25. Fabrication and low-velocity impact response of pyramidal lattice stitched foam sandwich composites
26. Design and static testing of wing structure of a composite four-seater electric aircraft
27. CSG Elastic Modulus Model Prediction Considering Meso-components and its Effect
28. Optimization of spinning parameters of 20/316L bimetal composite tube based on orthogonal test
29. Chloride-induced corrosion behavior of reinforced cement mortar with MWCNTs
30. Statistical Law and Predictive Analysis of Compressive Strength of Cemented Sand and Gravel
31. Young’s modulus and Poisson’s ratio of the deformable cement adhesives
32. Reverse localization on composite laminates using attenuated strain wave
33. Impact of reinforcement on shrinkage in the concrete floors of a residential building
34. Novel multi-zone self-heated composites tool for out-of-autoclave aerospace components manufacturing
35. Effect of notch on static and fatigue properties of T800 fabric reinforced composites
36. Electrochemical Discharge Grinding of Metal Matrix Composites Using Shaped Abrasive Tools Formed by Sintered Bronze/diamond
37. Fabrication and performance of PNN-PZT piezoelectric ceramics obtained by low-temperature sintering
38. The extension of thixotropy of cement paste under vibration: a shear-vibration equivalent theory
39. Conventional and unconventional materials used in the production of brake pads – review
40. Inverse Analysis of Concrete Meso-constitutive Model Parameters Considering Aggregate Size Effect
41. Finite element model of laminate construction element with multi-phase microstructure
42. Effect of Cooling Rate and Austenite Deformation on Hardness and Microstructure of 960MPa High Strength Steel
43. Study on microcrystalline cellulose/chitosan blend foam gel material
44. Investigating the influence of multi-walled carbon nanotubes on the mechanical and damping properties of ultra-high performance concrete
45. Preparation and properties of metal textured polypropylene composites with low odor and low VOC
46. Calculation Model for the Mixing Amount of Internal Curing Materials in High-strength Concrete based on Modified MULTIMOORA
47. Electric degradation in PZT piezoelectric ceramics under a DC bias
48. Cushioning energy absorption of regular polygonal paper corrugation tubes under axial drop impact
49. Erratum
50. Study on Macroscopic and Mesoscopic Mechanical Behavior of CSG based on Inversion of Mesoscopic Material Parameters
51. Effect of interphase parameters on elastic modulus prediction for cellulose nanocrystal fiber reinforced polymer composite
52. Statistical Law and Predictive Analysis of Compressive Strength of Cemented Sand and Gravel
53. Retraction
54. Assessment of nano-TiO₂ and class F fly ash effects on flexural fracture and microstructure of binary blended concrete