Frontmatter

Articles in the same Issue

1. Frontmatter
2. Review
3. Research review of diversified reinforcement on aluminum metal matrix composites: fabrication processes and mechanical characterization
4. Original articles
5. On the mechanisms of modal damping in FRP/honeycomb sandwich panels
6. Innovative experimental and finite element assessments of the performance of CFRP-retrofitted RC beams under fatigue loading
7. Mixed-mode I/III fracture toughness of polymer matrix composites toughened with waste particles
8. A novel analytical curved beam model for predicting elastic properties of 3D eight-harness satin weave composites
9. Microwave absorption and mechanical properties of double-layer cement-based composites containing different replacement levels of fly ash
10. Electrical and rheological properties of carbon black and carbon fiber filled low-density polyethylene/ethylene vinyl acetate composites
11. Effect of neutron irradiation on neat epoxy resin stability in shielding applications
12. Study on the relation between microstructural change and compressive creep stress of a PBX substitute material
13. Chemical synthesis and densification of a novel Ag/Cr₂O₃-AgCrO₂ nanocomposite powder
14. Reinforcing polypropylene with calcium carbonate of different morphologies and polymorphs
15. Fabrication, mechanical, thermal, and electrical characterization of epoxy/silica composites for high-voltage insulation
16. Synergy of cashew nut shell filler on tribological behaviors of natural-fiber-reinforced epoxy composite
17. Fabrication and Failure Prediction of Carbon-alum solid composite electrolyte based humidity sensor using ANN
18. Investigation of three-body wear of dental materials under different chewing cycles
19. Structural and physico-mechanical characterization of closed-cell aluminum foams with different zinc additions
20. Mechanical performance of polyester pin-reinforced foam filled honeycomb sandwich panels
21. Effect of chemical treatment on thermal properties of hair fiber-based reinforcement of HF/HDPE composites
22. Indium doping in sol-gel synthesis of In-Sm co-doped xIn-0.05%Sm-TiO₂ composite photocatalyst
23. Effect of the meso-structure on the strain concentration of carbon-carbon composites with drilling hole