Frontmatter

Articles in the same Issue

1. Frontmatter
2. Review
3. Automated profile preforming for structural components
4. Original articles
5. Effects of surface grafting of copper nanoparticles on the tensile and bonding properties of flax fibers
6. Thermomechanical study of polyethylene porous membrane by coating silicon dioxide nanoparticles
7. Crystallization, structural and mechanical properties of PA6/PC/NBR ternary blends: effect of NBR-g-GMA compatibilizer and organoclay
8. Aging analysis of high voltage silicone rubber/silica nanocomposites under accelerated weathering conditions
9. Investigation of viscoelastic properties and thermal behavior of photocurable epoxy acrylate nanocomposites
10. The research of soft matter properties by light scattering material adding drop additive
11. Microstructure and corrosion properties of SiC/Al-Mg-Cu-Si-Sn composites
12. Tribological properties and microstructures of Al₂O₃-TiC-TiB₂ reinforced composites
13. Sustained release of OIC-A006 from PLGA microspheres to induce osteogenesis of composite PLGA/β-TCP scaffolds
14. Study the effect of fiber loading and alkali treatment on the mechanical and water absorption properties of wheat straw fiber-reinforced epoxy composites
15. Effect of mechanical alloying on the synthesis of Fe-TiC nanocomposite
16. A comparative finite element analysis of two types of axial and radial functionally graded dental implants with titanium one around implant-bone interface
17. Investigation of the effect of inert inclusions on densification during solid-state sintering of metal matrix composites
18. Multiscale thermomechanical modeling of short fiber-reinforced composites
19. Effects of the alkaline solution/binder ratio and curing condition on the mechanical properties of alkali-activated fly ash mortars
20. Failure analysis and strengthening mechanism of Z-pinned composite T-joints under tensile loading
21. Characteristic analysis of carbon nanotube thread embedded into three-dimensional braided composite under bending load