Startseite Technik Effect of reinforcement particle amounts on dry sliding wear behavior of shot-peened SiC/A356 composites
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Effect of reinforcement particle amounts on dry sliding wear behavior of shot-peened SiC/A356 composites

  • Coşkun Yolcu

    Coşkun Yolcu, born in 1992, graduated in Mechanical Engineering from Dokuz Eylül University, Izmir, Turkey in 2015. He is a Ph. D. student in Mechanical Engineering and doing research on production of aluminum-based metal matrix composites, plastic deformation, wear resistance, and fatigue.

     EMAIL logo     und Fatih Kahraman
Veröffentlicht/Copyright: 7. April 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Materials Testing
Aus der Zeitschrift Materials Testing Band 64 Heft 4

Abstract

Aluminum matrix composites focus primarily on improving mechanical properties such as hardness and wear, however, the softness of the aluminum matrix and thermal coefficient difference between matrix and reinforcement adversely affect these properties. In the present paper, the wear properties of aluminum matrix composites including different amounts of reinforcement were investigated before and after the shot peening process which was used for decreasing the harmful effects as mentioned. The experimental studies clearly reveal that shot peening, which is a mechanical surface treatment and generally used for improving fatigue resistance of materials, has a beneficial effect on the poor wear behavior of metal matrix composites. Obtaining results also indicate that the microhardness is improved greatly up to a certain depth by shot peening due to the higher dislocation density/microstrain which is evidenced with the X-ray diffraction tests.

Keywords: mechanical surface treatment; metal matrix composites; shot peening; stir casting; wear resistance
Corresponding author: Coşkun Yolcu, Mechanical Engineering, Dokuz Eylül Üniversitesi Mühendislik Fakültesi, Adatepe Mah. Doğuş Cad. NO: 207-E, Buca, İzmir, Turkey, E-mail:

About the author

Coşkun Yolcu

Coşkun Yolcu, born in 1992, graduated in Mechanical Engineering from Dokuz Eylül University, Izmir, Turkey in 2015. He is a Ph. D. student in Mechanical Engineering and doing research on production of aluminum-based metal matrix composites, plastic deformation, wear resistance, and fatigue.

Acknowledgments

The authors would like to acknowledge the valuable contribution of Muhammer Tüm, and Tümersan Industry and Trade Limited Company.

  1. Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.

  2. Research funding: None declared.

  3. Conflict of interest statement: The authors declare no conflicts of interest regarding this article.

References

[1] A. Kalkanlı and S. Yılmaz, “Synthesis and characterization of aluminum alloy 7075 reinforced with silicon carbide particulates,” Mater. Des., vol. 29, no. 4, pp. 775–780, 2008, https://doi.org/10.1016/j.matdes.2007.01.007.Suche in Google Scholar

[2] S. Soltani, R. A. Khosroshahi, R. T. Mousavian, Z. Y. Jiang, A. F. Boostani, and D. Brabazon, “Stir casting process for manufacture of Al–SiC composites,” Rare Metals, vol. 36, no. 7, pp. 581–590, 2017, https://doi.org/10.1007/s12598-015-0565-7.Suche in Google Scholar

[3] C. Bhagyanathan, P. Karuppuswamy, R. Raghu, S. Gowtham, and M. Ravi, “Recycling of LM25 aluminum alloy scraps,” Mater. Test., vol. 60, no. 9, pp. 848–854, 2018, https://doi.org/10.3139/120.111223.Suche in Google Scholar

[4] Q. G. Wang, “Microstructural effects on the tensile and fracture behavior of aluminum casting alloys A356/357,” Metall. Mater. Trans. A, vol. 34, pp. 2887–2899, 2003, https://doi.org/10.1007/s11661-003-0189-7.Suche in Google Scholar

[5] U. Sanchez-Santana, C. Rubio-González, G. Gomez-Rosas, et al.., “Wear and friction of 6061-T6 aluminum alloy treated by laser shock processing,” Wear, vol. 260, nos. 7-8, pp. 847–854, 2006, https://doi.org/10.1016/j.wear.2005.04.014.Suche in Google Scholar

[6] S. T. Mavhungu, E. T. Akinlabi, M. A. Onitiri, and F. M. Varachia, “Aluminum matrix composites for industrial use: advances and trends,” Proc. Manuf., vol. 7, pp. 178–182, 2017, https://doi.org/10.1016/j.promfg.2016.12.045.Suche in Google Scholar

[7] K. T. Cho, S. Yoo, K. M. Lim, H. S. Kim, and W. B. Lee, “Effect of Si content on surface hardening of Al–Si alloy by shot peening treatment,” J. Alloys Compd., vol. 509, pp. S265–S270, 2011, https://doi.org/10.1016/j.jallcom.2011.01.216.Suche in Google Scholar

[8] R. Kandasamy and B. Marimuthu, “Manufacturing of Al-Li-Si3N4 metal matrix composite for weight reduction,” Mater. Test., vol. 63, no. 2, pp. 169–175, 2021, https://doi.org/10.1515/mt-2020-0029.Suche in Google Scholar

[9] G. V. Kumar, C. S. P. Rao, N. Selvaraj, and M. S. Bhagyashekar, “Studies on Al6061-SiC and Al7075-Al2O3 metal matrix composites,” J. Miner. Mater. Char. Eng., vol. 9, no. 1, pp. 43–55, 2010, https://doi.org/10.4236/jmmce.2010.91004.Suche in Google Scholar

[10] Ö. N. Doǧan, J. A. Hawk, J. H. Tylczak, R. D. Wilson, and R. D. Govier, “Wear of titanium carbide reinforced metal matrix composites,” Wear, vol. 225, pp. 758–769, 1999, https://doi.org/10.1016/S0043-1648(99)00030-7.Suche in Google Scholar

[11] O. M. Irfan, M. A. Irfan, and F. A. Almufadi, “Effect of nanoparticle reinforcement on mechanical properties and erosion–corrosion behavior of cast aluminum,” Mater. Test., vol. 61, no. 7, pp. 667–673, 2019, https://doi.org/10.3139/120.111369.Suche in Google Scholar

[12] V. V. Monikandan, M. A. Joseph, and P. K. Rajendrakumar, “Dry sliding wear studies of aluminum matrix hybrid composites,” Resour.-Eff. Technol. vol. 2, pp. S12–S24, 2016, https://doi.org/10.1016/j.reffit.2016.10.002.Suche in Google Scholar

[13] S. D. Kumar and M. Ravichandran, “Synthesis, properties and EDM behavior of 10 wt.-% ZrB2 reinforced AA7178 matrix composites,” Mater. Test., vol. 60, no. 9, pp. 877–884, 2018, https://doi.org/10.3139/120.111226.Suche in Google Scholar

[14] V. Mohanavel, K. Rajan, P. V. Senthil, and S. Arul, “Mechanical behaviour of hybrid composite (AA6351+Al2O3+Gr) fabricated by stir casting method,” Mater. Today: Proc., vol. 4, no. 2, pp. 3093–3101, 2017, https://doi.org/10.1016/j.matpr.2017.02.192.Suche in Google Scholar

[15] Y. Pazhouhanfar and B. Eghbali, “Microstructural characterization and mechanical properties of TiB2 reinforced Al6061 matrix composites produced using stir casting process,” Mater. Sci. Eng.: A, vol. 710, pp. 172–180, 2018, https://doi.org/10.1016/j.msea.2017.10.087.Suche in Google Scholar

[16] B. M. M. Selvan, V. Anandakrishnan, M. Duraiselvam, and S. Sundarameenakshi, “Wear testing of in situ cast AA8011-TiB2 metal matrix composites,” Mater. Test., vol. 61, no. 8, pp. 779–786, 2019, https://doi.org/10.3139/120.111386.Suche in Google Scholar

[17] P. N. Bindumadhavan, T. K. Chia, M. Chandrasekaran, H. K. Wah, L. N. Lam, and O. Prabhakar, “Effect of particle-porosity clusters on tribological behavior of cast aluminum alloy A356-SiCp metal matrix composites,” Mater. Sci. Eng. A, vol. 315, nos. 1–2, pp. 217–226, 2001, https://doi.org/10.1016/S0921-5093(00)01989-4.Suche in Google Scholar

[18] P. K. Deshpande and R. Y. Lin, “Wear resistance of WC particle reinforced copper matrix composites and the effect of porosity,” Materials Science and Engineering: A, vol. 418, nos. 1–2, pp. 137–145, 2006, https://doi.org/10.1016/j.msea.2005.11.036.Suche in Google Scholar

[19] H. A. Al-Salihi, A. A. Mahmood, and H. J. Alalkawi, “Mechanical and wear behavior of AA7075 aluminum matrix composites reinforced by Al2O3 nanoparticles,” Nanocomposites, vol. 5, no. 3, pp. 67–73, 2019, https://doi.org/10.1080/20550324.2019.1637576.Suche in Google Scholar

[20] D. Cree and M. Pugh, “Dry wear and friction properties of an A356/SiC foam interpenetrating phase composite,” Wear, vol. 272, no. 1, pp. 88–96, 2011, https://doi.org/10.1016/j.wear.2011.07.008.Suche in Google Scholar

[21] S. Kumar, M. Chakraborty, V. S. Sarma, and B. S. Murty, “Tensile and wear behaviour of in situ Al–7Si/TiB2 particulate composites,” Wear, vol. 265, nos. 1–2, pp. 134–142, 2008, https://doi.org/10.1016/j.wear.2007.09.007.Suche in Google Scholar

[22] L. Xie, C. Jiang, W. Lu, Y. Chen, and J. Huang, “Effect of stress peening on surface layer characteristics of (TiB+ TiC)/Ti–6Al–4V composite,” Mater. Des., vol. 33, pp. 64–68, 2012, https://doi.org/10.1016/j.matdes.2011.07.010.Suche in Google Scholar

[23] S. A. N. S. Ahmad, J. Hashim, and M. I. Ghazali, “Effect of porosity on tensile properties of cast particle reinforced MMC,” J. Compos. Mater., vol. 41, no. 5, pp. 575–589, 2007, https://doi.org/10.1177/0021998306066720.Suche in Google Scholar

[24] S. N. Aqida, M. I. Ghazali, and J. Hashim, “Effect of porosity on mechanical properties of metal matrix composite: an overview,” Jurnal Teknologi, vol. 40, pp. 17–32, 2004, https://doi.org/10.11113/jt.v40.395.Suche in Google Scholar

[25] D. Liu, B. Tang, X. Zhu, H. Chen, J. He, and J. P. Celis, “Improvement of the fretting fatigue and fretting wear of Ti6Al4V by duplex surface modification,” Surf. Coat. Technol., vol. 116, pp. 234–238, 1999, https://doi.org/10.1016/S0257-8972(99)00279-0.Suche in Google Scholar

[26] O. M. Alyousif, D. L. Engelberg, and T. J. Marrow, “Surface grain boundary engineering of shot-peened type 304 stainless steel,” J. Mater. Sci., vol. 43, no. 4, pp. 1270–1277, 2008, https://doi.org/10.1007/s10853-007-2252-z.Suche in Google Scholar

[27] B. K. C. Ganesh, W. Sha, N. Ramanaiah, and A. Krishnaiah, “Effect of shotpeening on sliding wear and tensile behavior of titanium implant alloys,” Mater. Des. (1980-2015), vol. 56, pp. 480–486, 2014, https://doi.org/10.1016/j.matdes.2013.11.052.Suche in Google Scholar

[28] B. Hashemi, M. R. Yazdi, and V. Azar, “The wear and corrosion resistance of shot peened–nitrided 316L austenitic stainless steel,” Mater. Des., vol. 32, no. 6, pp. 3287–3292, 2011, https://doi.org/10.1016/j.matdes.2011.02.037.Suche in Google Scholar

[29] A. Zammit, S. Abela, L. Wagner, M. Mhaede, and M. Grech, “Tribological behaviour of shot peened Cu–Ni austempered ductile iron,” Wear,, vol. 302, no. 1, pp. 829–836, 2013, https://doi.org/10.1016/j.wear.2012.12.027.Suche in Google Scholar

[30] W. Luan, C. Jiang, V. Ji, and H. Wang, “Effect of shot peening on surface mechanical properties of TiB2/Al composite,” J. Mater. Sci.,” vol. 44, no. 10, pp. 2454–2458, 2009, https://doi.org/10.1007/s10853-009-3310-5.Suche in Google Scholar

[31] J. Huang, Z. Wang, K. Bian, and C. Jiang, “Thermal relaxation of residual stresses in shot peened surface layer of SiCw/Al composite,” J. Mater. Eng. Performance,” vol. 21, no. 6, pp. 915–919, 2012, https://doi.org/10.1007/s11665-011-9982-4.Suche in Google Scholar

[32] Y. Ochi, K. Masaki, T. Matsumura, and T. Sekino, “Effect of shot-peening treatment on high cycle fatigue property of ductile cast iron,” Int. J. Fatigue,” vol. 23, no. 5, pp. 441–448, 2001, https://doi.org/10.1016/S0142-1123(00)00110-9.Suche in Google Scholar

[33] P. Sanjurjo, C. Rodríguez, I. F. Pariente, F. J. Belzunce, and A. F. Canteli, “The influence of shot peening on the fatigue behaviour of duplex stainless steels,” Proc. Eng., vol. 2, no. 1, pp. 1539–1546, 2010, https://doi.org/10.1016/j.proeng.2010.03.166.Suche in Google Scholar

[34] A. Zammit, M. Bonnici, M. Mhaede, R. Wan, and L. Wagner, “Shot peening of austempered ductile iron gears,” Surf. Eng., vol. 33, no. 9, pp. 679–686, 2017, https://doi.org/10.1080/02670844.2016.1266118.Suche in Google Scholar

[35] I. Karademir, O. Unal, S. Ates, H. Gokce, and M. S. Gok, “Effect of severe plastic deformation on wear properties of aluminum matrix composites,” Acta Phys. Pol. A, vol. 131, no. 3, pp. 487–489, 2017, https://doi.org/10.12693/APhysPolA.131.487.Suche in Google Scholar

[36] P. Y. Dong, H. D. Zhao, F. F. Chen, and J. W. Li, “Microstructures and properties of A356–10% SiC particle composite castings at different solidification pressures,” Trans. Nonferrous Metals Society of China, vol. 23, no. 8, pp. 2222–2228, 2013, https://doi.org/10.1016/S1003-6326(13)62721-1.Suche in Google Scholar

[37] O. Unal, A. C. Karaoglanli, R. Varol, and A. Kobayashi, “Microstructure evolution and mechanical behavior of severe shot peened commercially pure titanium,” Vacuum, vol. 110, pp. 202–206, 2014, https://doi.org/10.1016/j.vacuum.2014.08.004.Suche in Google Scholar

[38] K. Kalaiselvan, N. Murugan, and S. Parameswaran, “Production and characterization of AA6061–B4C stir cast composite,” Mater. Des., vol. 32, no. 7, pp. 4004–4009, 2011, https://doi.org/10.1016/j.matdes.2011.03.018.Suche in Google Scholar

[39] M. T. Alam, A. H. Ansari, S. Arif, and M. N. Alam, “Mechanical properties and morphology of aluminium metal matrix nanocomposites-stir cast products,” Adv. Mater. Process. Technol., vol. 3, no. 4, pp. 600–615, 2017, https://doi.org/10.1080/2374068X.2017.1350543.Suche in Google Scholar

[40] K. T. Cho, K. Song, S. H. Oh, Y. K. Lee, K. M. Lim, and W. B. Lee, “Surface hardening of aluminum alloy by shot peening treatment with Zn based ball,” Mater. Sci. Eng.: A, vol. 543, pp. 44–49, 2012, https://doi.org/10.1016/j.msea.2012.02.043.Suche in Google Scholar

[41] M. Vashista and S. Paul, “Correlation between full width at half maximum (FWHM) of XRD peak with residual stress on ground surfaces,” Philos. Mag., vol. 92, no. 33, pp. 4194–4204, 2012, https://doi.org/10.1080/14786435.2012.704429.Suche in Google Scholar
Published Online: 2022-04-07
Published in Print: 2022-04-26

© 2022 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Effect of deep cryogenic treatment on microstructure and mechanical properties of a CoCrFeNiMo medium-entropy alloy
  3. Bilayer growth kinetics and tribological characterization of boronized AISI M2 steel
  4. Effect of graphene nanoplatelets on mechanical and impact properties of an aramid/glass-reinforced epoxy composite
  5. The effect of SiC content on microstructural and tribological properties of sintered B4C and SiC reinforced Al–Cu–Mg–Si matrix hybrid composites
  6. Effects of asymmetric tooth profile on single-tooth stiffness of polymer gears
  7. Hunger games search algorithm for global optimization of engineering design problems
  8. Alumina catalyst waste utilization for aluminum-based composites using the friction stir process
  9. Comparison of microstructure and wear behaviors of PTA coated AISI 304 with alumina, boron and ekaboron III powder
  10. Influence of testers on the ISE effect
  11. Crashworthiness design of heat treated vehicle parts with tailored properties
  12. Shape coefficient of impact-echo for small-size short cylinder/circular tube structures
  13. Resistance spot welding of Al6061 lap joints with a polyvinyl alcohol-bonded graphene interlayer
  14. Effect of reinforcement particle amounts on dry sliding wear behavior of shot-peened SiC/A356 composites
  15. Prediction and optimization of thrust force during the drilling of AISI 2080 steel
https://doi.org/10.1515/mt-2021-2060
Schlagwörter für diesen Artikel
mechanical surface treatment; metal matrix composites; shot peening; stir casting; wear resistance

Artikel in diesem Heft

  1. Frontmatter
  2. Effect of deep cryogenic treatment on microstructure and mechanical properties of a CoCrFeNiMo medium-entropy alloy
  3. Bilayer growth kinetics and tribological characterization of boronized AISI M2 steel
  4. Effect of graphene nanoplatelets on mechanical and impact properties of an aramid/glass-reinforced epoxy composite
  5. The effect of SiC content on microstructural and tribological properties of sintered B4C and SiC reinforced Al–Cu–Mg–Si matrix hybrid composites
  6. Effects of asymmetric tooth profile on single-tooth stiffness of polymer gears
  7. Hunger games search algorithm for global optimization of engineering design problems
  8. Alumina catalyst waste utilization for aluminum-based composites using the friction stir process
  9. Comparison of microstructure and wear behaviors of PTA coated AISI 304 with alumina, boron and ekaboron III powder
  10. Influence of testers on the ISE effect
  11. Crashworthiness design of heat treated vehicle parts with tailored properties
  12. Shape coefficient of impact-echo for small-size short cylinder/circular tube structures
  13. Resistance spot welding of Al6061 lap joints with a polyvinyl alcohol-bonded graphene interlayer
  14. Effect of reinforcement particle amounts on dry sliding wear behavior of shot-peened SiC/A356 composites
  15. Prediction and optimization of thrust force during the drilling of AISI 2080 steel
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2026 De Gruyter Brill
Heruntergeladen am 1.1.2026 von https://www.degruyterbrill.com/document/doi/10.1515/mt-2021-2060/pdf
Button zum nach oben scrollen