An approach for obtaining surface residual stress based on indentation test and strain measurement
-
He Xue
He Xue, born in 1961, currently works as a professor at Xi’an University of Science and Technology in mechanical engineering.
,
Yu-Lei Jia
Yu-Lei Jia, born in 1995, currently studies as a post-graduate at Xi’an University of Science and Technology in mechanical engineering.
Jing-Zhi Lu, born in 1997, currently studies as a post-graduate at Xi’an University of Science and Technology in mechanical engineering.
Shuang Wang, born in 1996, currently studies as a post-graduate at Xi’an University of Science and Technology in mechanical engineering.
Zheng Wang, born in 1996, currently studies as a post-graduate at Xi’an University of Science and Technology in mechanical engineering.
Shuai Wang, born in 1993, currently works as a doctor of engineering at Xi’an University of Science and Technology in mechanical design and theory.
Abstract
During the welding process of welded joints in nuclear power plants, uneven deformation caused by temperature changes will lead to the generation of residual stress. Aiming at the problem that the demarcate experiment is easy to cause errors when the traditional indentation strain method is used to measure the residual stress. Using 316L austenitic stainless steel as an example, ABAQUS finite element simulation is combined with physical experiments to study the effects of different indentation depths on the strain increment after unloading under a state of residual stress. The results show that the indentation depth and strain increment are linearly related. Based on the linear relationship, an independent parameter that characterizes the residual stress is obtained and a model between the parameter and residual stress established. It provides a certain basis for the convenience and precise detection of residual stress in nuclear power plants machinery structures in service.
Funding source: National Natural Science Foundation of China http://dx.doi.org/10.13039/501100001809
Award Identifier / Grant number: 52075434
Funding source: International Cooperation Project of Science and Technology Department of Shaanxi Province
Award Identifier / Grant number: 2021KW-36
About the authors
He Xue, born in 1961, currently works as a professor at Xi’an University of Science and Technology in mechanical engineering.
Yu-Lei Jia, born in 1995, currently studies as a post-graduate at Xi’an University of Science and Technology in mechanical engineering.
Jing-Zhi Lu, born in 1997, currently studies as a post-graduate at Xi’an University of Science and Technology in mechanical engineering.
Shuang Wang, born in 1996, currently studies as a post-graduate at Xi’an University of Science and Technology in mechanical engineering.
Zheng Wang, born in 1996, currently studies as a post-graduate at Xi’an University of Science and Technology in mechanical engineering.
Shuai Wang, born in 1993, currently works as a doctor of engineering at Xi’an University of Science and Technology in mechanical design and theory.
-
Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.
-
Research funding: This work was financially supported by the National Natural Science Foundation of China (52075434) and the International Cooperation Project of Science and Technology Department of Shaanxi Province (2021KW-36). Both financial supports are gratefully acknowledged.
-
Conflict of interest statement: The authors declare no conflicts of interest regarding this article.
References
[1] M. J. Pavier, C. G. C. Poussard, and D. J. Smith, “Effect of residual stress around cold worked holes on fracture under superimposed mechanical load,” Eng. Fract. Mech., vol. 63, no. 6, pp. 751–773, 1999, https://doi.org/10.1016/S0013-7944(99)00050-8.Suche in Google Scholar
[2] D. B. Zahl and R. M. McMeeking, “The influence of residual stress on the yielding of metal matrix composites,” Acta Metall. Mater., vol. 39, no. 6, pp. 1117–1122, 1999, https://doi.org/10.1016/0956-7151(91)90199-B.Suche in Google Scholar
[3] R. H. Leggatt, D. J. Smith, and S. D. Smith, “Development and experimental validation of the deep hole method for residual stress measurement,” J. Strain Anal. Eng. Des., vol. 31, no. 3, pp. 177–186, 1996, https://doi.org/10.1243/03093247V313177.Suche in Google Scholar
[4] K. M. B. Jansen, J. J. W. Orij, and C. Z. Meijer, “Comparison of residual stress predictions and measurements using excimer laser layer removal,” Polym. Eng. Sci., vol. 39, no. 10, pp. 2030–2041, 1999, https://doi.org/10.1002/pen.11596.Suche in Google Scholar
[5] C. H. Ma, J. H. Huang, and H. Chen, “Residual stress measurement in textured thin film by grazing-incidence X-ray diffraction,” Thin Solid Films, vol. 418, no. 2, pp. 73–78, 2002, https://doi.org/10.1016/S0040-6090(02)00680-6.Suche in Google Scholar
[6] R. B. Gou, Y. L. Zhang, X. D. Xu, L. Sun, and Y. Yang, “Residual stress measurement of new and in-service X70 pipelines by X-ray diffraction method,” NDT E Int., vol. 44, no. 5, pp. 387–393, 2011, https://doi.org/10.1016/j.ndteint.2011.03.003.Suche in Google Scholar
[7] G. S. Schajer and L. Yang, “Residual-stress measurement in orthotropic materials using the hole-drilling method,” Exp. Mech., vol. 34, no. 4, pp. 324–333, 1994, https://doi.org/10.1007/BF02325147.Suche in Google Scholar
[8] M. Baig, S. M. A. Khan, M. M. EI Rayes, and S. A. Hossion, “Evaluation of residual stresses present in spirally welded API grade pipeline steel using the hole drilling method,” Mater. Test., vol. 59, no. 3, pp. 258–264, 2017, https://doi.org/10.3139/120.110994.Suche in Google Scholar
[9] M. Hayashi, S. Ohkido, N. Minakawa, and Y. Morii, “Development of residual stress measurement apparatus by neutron diffraction and its application to bent carbon steel,” Zairyo, vol. 47, no. 4, pp. 420–426, 2021, https://doi.org/10.2472/JSMS.70.353.Suche in Google Scholar
[10] X. Chen, J. Yan, and A. M. Karlsson, “On the determination of residual stress and mechanical properties by indentation,” Mater. Sci. Eng., vol. 416, nos 1–2, pp. 139–149, 2006, https://doi.org/10.1016/j.msea.2005.10.034.Suche in Google Scholar
[11] S. H. Kim, B. W. Lee, Y. Choi, and D. Kwon, “Quantitative determination of contact depth during spherical indentation of metallic materials—a FEM study,” Mater. Sci. Eng., vol. 415, nos 1–2, pp. 59–65, 2006, https://doi.org/10.1016/j.msea.2005.08.217.Suche in Google Scholar
[12] M. H. Zhao, X. Chen, J. Yan, and A. M Karlsson, “Determination of uniaxial residual stress and mechanical properties by instrumented indentation,” Acta Mater., vol. 54, no. 10, pp. 2823–2832, 2006, https://doi.org/10.1016/j.actamat.2006.02.026.Suche in Google Scholar
[13] M. Steinzig and T. Takahashi, “Residual stress measurement using the hole drilling method and laser speckle interferometry part IV: measurement accuracy,” Exp. Tech., vol. 27, no. 6, pp. 59–63, 2003, https://doi.org/10.1111/j.1747-1567.2003.tb00141.x.Suche in Google Scholar
[14] J. H. Underwood, “Residual-stress measurement using surface displacements around an indentation,” Exp. Mech., vol. 13, no. 9, pp. 373–380, 1973, https://doi.org/10.1007/BF02324039.Suche in Google Scholar
[15] A. Bolshakov, W. C. Oliver, and G. M. Pharr, “Influences of stress on the measurement of mechanical properties using nanoindentation: part II. Finite element simulations,” J. Mater. Res., vol. 11, no. 3, pp. 760–768, 1996, https://doi.org/10.1557/JMR.1996.0092.Suche in Google Scholar
[16] Y. H. Lee and D. Kwon, “Residual stresses in DLC/Si and Au/Si systems: application of a stress-relaxation model to the nanoindentation technique,” J. Mater. Res., vol. 17, no. 4, pp. 901–906, 2002, https://doi.org/10.1557/JMR.2002.0131.Suche in Google Scholar
[17] L. Shen, Y. M. He, D. B. Liu, Q. Gong, and B. Zhang, “A novel method for determining surface residual stress components and their directions in spherical indentation,” J. Mater. Res., vol. 30, no. 8, pp. 1078–1089, 2015, https://doi.org/10.1557/jmr.2015.87.Suche in Google Scholar
[18] L. Shen, Y. M. He, D. B. Liu, and M. L. Wan, “Prediction of residual stress components and their directions from pile-up morphology: an experimental study,” J. Mater. Res., vol. 31, no. 16, pp. 2392–2397, 2016, https://doi.org/10.1557/jmr.2016.270.Suche in Google Scholar
[19] H. N. Chen, K. X. Hu, and C. Z. Wu, “Uncertainty evaluation in measuring residual stress by indentation strain method,” China Meas. Test, vol. 36, no. 1, pp. 24–27, 2010 (In Chinese).Suche in Google Scholar
[20] H. N. Chen, Q. H. Lin, T. R. Li, and P. C. Qu, “Approximate correction method of indentation strain method for measuring weld stress,” Trans. China Weld. Inst., vol. 08, nos. 27–30, p. 114, 2006 (In Chinese).Suche in Google Scholar
© 2021 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Utilisation of the X-ray emission of an electron beam capillary for visualisation of the beam-material interaction
- Effect of Re and Ru additions on morphology and long-term stability of gamma prime particles in new modified superalloys prepared by a vacuum arc melting process
- Microstructure and fatigue performance of Cu-based M7C3-reinforced composites
- Influence of peroxide cross-linking temperature and time on mechanical, physical and thermal properties of polyethylene
- Fatigue behavior of bolted boreholes under various preloads
- Application of machine vision-based NDT technology in ceramic surface defect detection – a review
- An approach for obtaining surface residual stress based on indentation test and strain measurement
- Adhesive wear behavior of gas tungsten arc welded FeB-FeMo-C coatings
- Structural design optimization of the arc spring and dual-mass flywheel integrated with different optimization methods
- Tribological and adhesion properties of microwave-assisted borided AISI 316L steel
- Mechanical properties of wire arc additive manufactured carbon steel cylindrical component made by cold metal transferred arc welding process
- Improvement of the structural, thermal, and mechanical properties of polyurethane adhesives with nanoparticles and their application to Al/Al honeycomb sandwich panels
- Mechanical behavior of a friction welded AA6013/AA7075 beam
- Effects of carbon nanotubes on mechanical behavior of fiber reinforced composite under static loading
Artikel in diesem Heft
- Frontmatter
- Utilisation of the X-ray emission of an electron beam capillary for visualisation of the beam-material interaction
- Effect of Re and Ru additions on morphology and long-term stability of gamma prime particles in new modified superalloys prepared by a vacuum arc melting process
- Microstructure and fatigue performance of Cu-based M7C3-reinforced composites
- Influence of peroxide cross-linking temperature and time on mechanical, physical and thermal properties of polyethylene
- Fatigue behavior of bolted boreholes under various preloads
- Application of machine vision-based NDT technology in ceramic surface defect detection – a review
- An approach for obtaining surface residual stress based on indentation test and strain measurement
- Adhesive wear behavior of gas tungsten arc welded FeB-FeMo-C coatings
- Structural design optimization of the arc spring and dual-mass flywheel integrated with different optimization methods
- Tribological and adhesion properties of microwave-assisted borided AISI 316L steel
- Mechanical properties of wire arc additive manufactured carbon steel cylindrical component made by cold metal transferred arc welding process
- Improvement of the structural, thermal, and mechanical properties of polyurethane adhesives with nanoparticles and their application to Al/Al honeycomb sandwich panels
- Mechanical behavior of a friction welded AA6013/AA7075 beam
- Effects of carbon nanotubes on mechanical behavior of fiber reinforced composite under static loading
