Application of machine vision-based NDT technology in ceramic surface defect detection – a review

References

[1] S. Sun, H. Qi, X. An, Y. Ren, Y. Qiao, and L. Ruan, “Non-destructive testing of ceramic materials using mid-infrared ultrashort-pulse laser,” Appl. Phys. B Laser Opt., vol. 124, pp. 1–18, 2018, https://doi.org/10.1007/s00340-018-6921-1.Search in Google Scholar

[2] T. Tsai, N. Jeyaprakash, and C. Yang, “Non-destructive evaluations of 3D printed ceramic teeth: Young’s modulus and defect detections,” Ceram. Int., vol. 46, pp. 22987–22998, 2020, https://doi.org/10.1016/j.ceramint.2020.06.074.Search in Google Scholar

[3] L. Schultheis, “Simulation-supported technology evaluation of an industrial X-ray source concept up to 1 MV,” Mater. Test., vol. 51, pp. 711–716, 2018, https://doi.org/10.3139/120.110086 (in German).Search in Google Scholar

[4] Z. Zhao, “Review of non-destructive testing methods for defect detection of ceramics,” Ceram. Int., vol. 47, pp. 4389–4397, 2021, https://doi.org/10.1016/j.ceramint.2020.10.065.Search in Google Scholar

[5] F. Sakamoto and T. Takahashi, “Prediction of strength based on defect analysis in Al2O3 ceramics via non-destructive and three-dimensional observation using optical coherence tomography,” J. Ceram. Soc. Jpn., vol. 127, no. 7, pp. 462–468, 2019, https://doi.org/10.2109/jcersj2.19020.Search in Google Scholar

[6] L. Silva, G. Almeida, C. Nunes, G. Pereira, D. Kadoke, and W. Daum, “Automation of pipe defect detection and characterization by structured light,” Mater. Test., vol. 63, pp. 55–61, 2021, https://doi.org/10.1515mt-2020-0008.10.1515/mt-2020-0008Search in Google Scholar

[7] Y. Aydin and A. Kucukkose, “Ultrasonic testing and evaluation of moisture-dependent elastic properties of fire wood,” Mater. Test., vol. 62, pp. 1059–1064, 2020, https://doi.org/10.3139/120.111585.Search in Google Scholar

[8] C. Meola, G. Carlomagno, M. Foggia, and O. Natale, “Infrared thermography to detect residual ceramic in gas turbine blades ceramic in gas turbine blades,” Appl. Phys. Mater. Sci. Process, vol. 91, no. 4, pp. 685–691, 2008, https://doi.org/10.1007/s00339-008-4506-2.Search in Google Scholar

[9] X. Zhang, Y. Ding, L. Yan, A. Shi, and R. Liang, “A vision inspection system for the surface defects of strongly reflected metal based on multi-class SVM,” Expert Syst. Appl., vol. 38, pp. 5930–5939, 2011, https://doi.org/10.1016/j.eswa.2010.11.030.Search in Google Scholar

[10] T. Liu, F. Zhu, H. Yu, and H. Gu, “Surface defect detection and root cause analysis,” Glob. J. Sci. Front. Res. (GJSFR), vol. 1, pp. 1–8, 2020, https://doi.org/10.34257/GJSFRIVOL20IS3PG1.Search in Google Scholar

[11] H. Zhao, “Research progress of machine vision technology in artificial intelligence,” in 2nd International Conference on Artificial Intelligence and Engineering, Guilin, Guangxi, IEEE, 2017, pp. 101–108.10.12783/dtcse/aiea2017/14920Search in Google Scholar

[12] C. Kurban, E. Erzi, and S. Yilmaz, “A novel approach for quantitative measurement of the slag penetration area in refractories by using computer aided image analysis,” Mater. Test., vol. 53, pp. 629–633, 2011, https://doi.org/10.3139/120.110266.Search in Google Scholar

[13] M. Huang, J. Ninic, and Q. Zhang, “BIM, machine learning and computer vision techniques in underground construction: current status and future perspectives,” Tunn. Undergr. Space Technol., vol. 108, p. 103677, 2021, https://doi.org/10.1016/j.tust.2020.103677.Search in Google Scholar

[14] O. Semeniuta, S. Dransfeld, K. Martinsen, and P. Falkman, “Towards increased intelligence and automatic improvement in industrial vision systems,” Procedia Cirp, vol. 67, pp. 256–261, 2018, https://doi.org/10.1016/j.procir.2017.12.209.Search in Google Scholar

[15] K. Kim and D. Song, “Slope analysis in automatic defect detection for ceramic non-destructive testing images,” in International Conference on Future Information & Communication Engineering, Chongqing, China, IEEE, 2015, pp. 543–546.Search in Google Scholar

[16] Y. Wang, G. Jie, W. Na, Y. Chao, Z. Li, and J. Chen, “Identification of the concrete damage degree based on the principal component analysis of acoustic emission signals and neural networks,” Mater. Test., vol. 62, pp. 517–524, 2020, https://doi.org/10.3139/120.111512.Search in Google Scholar

[17] Z. Wu, R. Kalfarisi, F. Kouyoumdjian, and C. Taelman, “Applying deep convolutional neural network with 3D reality mesh model for water tank crack detection and evaluation,” Urban Water J., vol. 17, pp. 682–695, 2020, https://doi.org/10.1080/1573062X.2020.1758166.Search in Google Scholar

[18] J. Aust, S. Shankland, D. Pons, R. Mukundan, and A. Mitrovic, “Automated defect detection and decision-support in gas turbine blade inspection,” Aerospace, vol. 8, 2021, https://doi.org/10.3390/aerospace8020030.Search in Google Scholar

[19] J. Carroll, “Machine vision system detects antenna trace defects on automotive glass,” Vis. Syst. Des., vol. 24, pp. 16–18, 2019.Search in Google Scholar

[20] Y. Aslam, N. Santhi, N. Ramasamy, and K. Ramar, “A modified adaptive thresholding method using cuckoo search algorithm for detecting surface defects,” Int. J. Adv. Comput. Sci. Appl., vol. 10, pp. 214–220, 2019, https://doi.org/10.14569/ijacsa.2019.0100528.Search in Google Scholar

[21] M. Abu, A. Amir, Y. Lean, N. Zahri, and S. Azemi, “The performance analysis of transfer learning for steel defect detection by using deep learning,” J. Phys. Conf., vol. 1755, p. 12041, 2021, https://doi.org/10.1088/1742-6596/1755/1/012041.Search in Google Scholar

[22] P. Prabha, M. Bharathwaj, K. Dinesh, and G. Prashath, “Defect detection of industrial products using image segmentation and saliency,” J. Phys. Conf., vol. 1916, pp. 12165–12173, 2021, https://doi.org/10.1088/1742-6596/1916/1/012165.Search in Google Scholar

[23] P. Bhatt, R. Malhan, P. Rajendran, et al.., “Image-based surface defect detection using deep learning: a Review,” J. Comput. Inf. Sci. Eng., vol. 21, pp. 1–24, 2021, https://doi.org/10.1115/1.4049535.Search in Google Scholar

[24] N. Saeed, N. King, Z. Said, and M. Omar, “Automatic defects detection in CFRP thermograms, using convolutional neural networks and transfer learning,” Infrared Phys. Technol., vol. 102, p. 103048, 2019, https://doi.org/10.1016/j.infrared.2019.103048.Search in Google Scholar

[25] Z. Siddiqui, U. Park, S. Lee, et al.., “Robust powerline equipment inspection system based on a convolutional neural network,” Sensors, vol. 18, pp. 1–25, 2018, https://doi.org/10.3390/s18113837.Search in Google Scholar PubMed PubMed Central

[26] X. Wei, Z. Yang, Y. Liu, D. Wei, L. Jia, and Y. Li, “Railway track fastener defect detection based on image processing and deep learning techniques: a comparative study,” Eng. Appl. Artif. Intell., vol. 80, pp. 66–80, 2019, https://doi.org/10.1016/j.engappai.2019.01.008.Search in Google Scholar

[27] A. Mujeeb, W. Dai, M. Erdt, and A. Sourin, “One class based feature learning approach for defect detection using deep autoencoders,” Adv. Eng. Inf., vol. 42, p. 100933, 2019, https://doi.org/10.1016/j.aei.2019.100933.Search in Google Scholar

[28] P. Starke, “StressLifetc – NDT-related assessment of the fatigue life of metallic materials,” Mater. Test., vol. 61, pp. 297–303, 2019, https://doi.org/10.3139/120.111319.Search in Google Scholar

[29] L. Zhang, Q. Meng, K. Song, M. Gao, and Z. Cheng, “Inspection of defects in CFRP by improved magnetic induction tomography,” Mater. Test., vol. 61, pp. 255–259, 2019, https://doi.org/10.3139/120.111313.Search in Google Scholar

[30] A. Yimit, A. Itou, Y. Matsui, and T. Akashi, “Automatic visual inspection method for a coated surface having an orange peel effect,” IEEJ Trans. Electr. Electron. Eng., vol. 4, pp. 433–440, 2019, https://doi.org/10.1002/tee.22824.Search in Google Scholar

[31] R. Lõuk, A. Riid, R. Pihlak, and A. Tepljakov, “Pavement defect segmentation in orthoframes with a pipeline of three convolutional neural networks,” Algorithms, vol. 13, pp. 1–27, 2020, https://doi.org/10.3390/A13080198.Search in Google Scholar

[32] B. Kalantar, N. Ueda, H. Al-Najjar, and A. Halin, “Assessment of convolutional neural network architectures for earthquake-induced building damage detection based on pre-and post-event orthophoto images,” Rem. Sens., vol. 12, pp. 1–20, 2020, https://doi.org/10.3390/rs12213529.Search in Google Scholar

[33] J. Yun, W. Shin, G. Koo, M. Kim, C. Lee, and S. Lee, “Automated defect inspection system for metal surfaces based on deep learning and data augmentation,” J. Manuf. Syst., vol. 55, pp. 317–324, 2020, https://doi.org/10.1016/j.jmsy.2020.03.009.Search in Google Scholar

[34] J. Cheng and M. Wang, “Automated detection of sewer pipe defects in closed-circuit television images using deep learning techniques,” Autom. ConStruct., vol. 95, pp. 155–171, 2018, https://doi.org/10.1016/j.autcon.2018.08.006.Search in Google Scholar

[35] H. Perez, J. Tah, and A. Mosavi, “Deep learning for detecting building defects using convolutional neural networks,” Sensors, vol. 19, pp. 3556–3577, 2019, https://doi.org/10.3390/s19163556.Search in Google Scholar PubMed PubMed Central

[36] V. Bazhin, I. Danilov, and P. Petrov, “Development of automated system based on neural network algorithm for detecting defects on molds installed on casting machines,” J. Phys. Conf., vol. 1015, no. 3, 2018, https://doi.org/10.1088/1742-6596/1015/3/032025.Search in Google Scholar

[37] G. Psuj, “Multi-sensor data integration using deep learning for characterization of defects in steel elements,” Sensors, vol. 18, no. 1, pp. 1–15, 2018, https://doi.org/10.3390/s18010292.Search in Google Scholar PubMed PubMed Central

[38] A. Costa, H. Figueroa, and J. Fracarolli, “Computer vision based detection of external defects on tomatoes using deep learning,” Biosyst. Eng., vol. 190, pp. 131–144, 2020, https://doi.org/10.1016/j.biosystemseng.2019.12.003.Search in Google Scholar

[39] C. Dunderdale, W. Brettenny, C. Clohessy, and E. van Dyk, “Photovoltaic defect classification through thermal infrared imaging using a machine learning approach,” Prog. Photovoltaics Res. Appl., vol. 28, no. 3, pp. 177–188, 2020, https://doi.org/10.1002/pip.3191.Search in Google Scholar

[40] S. Lee, B. Tama, S. Moon, and S. Lee, “Steel surface defect diagnostics using deep convolutional neural network and class activation map,” Appl. Sci., vol. 9, no. 24, pp. 5449–5462, 2019, https://doi.org/10.3390/app9245449.Search in Google Scholar

[41] B. Ramalingam, V. Manuel, M. Elara, et al.., “Visual inspection of the aircraft surface using a teleoperated reconfigurable climbing robot and enhanced deep learning technique,” Int. J. Aerosp. Eng., vol. 1, pp. 1–14, 2019, https://doi.org/10.1155/2019/5137139.Search in Google Scholar

[42] T. Yang, Research on Automatic Inspection Technology of Ceramic Ball Surface Defects Based on Machine Vision, Harbin, China, Harbin Institute of Technology, 2007.Search in Google Scholar

[43] Y. Sun, L. Fu, and Z. Wang, “Fast detection algorithm for surface defects of ceramic balls based on streak reflection,” Test Sci. Instrum., vol. 11, pp. 28–37, 2020.Search in Google Scholar

[44] Y. Cheng, L. Pei, Y. Guo, and L. Wang, “Crack detection in magnetic tile images using nonsubsampled shearlet transform and envelope gray level gradient,” Opt Laser. Technol., vol. 90, no. 1, pp. 7–17, 2017, https://doi.org/10.1016/j.optlastec.2016.08.016.Search in Google Scholar

[45] Q. Li, Y. Wang, Y. Zhang, and F. Zhang, “Research on visual inspection algorithm for surface defects of ceramic tiles,” China Ceram. vol. 51, no. 3, pp. 44–47, 2015.Search in Google Scholar

[46] S. Lan and X. Zheng, “Research on computer aided defect recognition of ceramic crack,” in 2015 7th International Conference on Measuring Technology and Mechatronics Automation, Nanchang, China, IEEE, 2015, pp. 852–855.10.1109/ICMTMA.2015.210Search in Google Scholar

[47] G. Liao, M. Lin, and J. Xi, “A Machine vision approach for small ceramic tubes detection,” in Second International Conference on Intelligent Computation Technology and Automation, Changsha, China, IEEE, 2009, pp. 313–316.10.1109/ICICTA.2009.311Search in Google Scholar

[48] A. Shire, M. Khanapurkar, and R. Mundewadikar, “Plain ceramic tiles surface defect detection using image processing,” in Fourth International Conference on Emerging Trends in Engineering & Technology, Port Louis, Mauritius, IEEE, 2011, pp. 215–220.10.1109/ICETET.2011.63Search in Google Scholar

[49] E. Golkar, A. Patel, L. Yazdi, and A. Prabuwono, “Ceramic tile border defect detection algorithms in automated visual inspection system,” J. Am. Sci., vol. 7, no. 6, pp. 542–550, 2011.Search in Google Scholar

[50] M. Sharma and G. Kaur, “Integrated approach for defect detection in ceramic tiles,” Int. J. Comput. Technol., vol. 3, no. 2, pp. 259–262, 2012, https://doi.org/10.24297/ijct.v3i2b.2871.Search in Google Scholar

[51] M. Truong and S. Kim, “Automatic image thresholding using Otsu’s method and entropy weighting scheme for surface defect detection,” Soft Comput., vol. 22, no. 13, pp. 4197–4203, 2017, https://doi.org/10.1007/s00500-017-2709-1.Search in Google Scholar

[52] J. Zhang, Y. Zhang, G. Zhao, and W. Zhong, “Crack detect of ceramic tiles based on machine vision,” Packag. Eng., vol. 9, pp. 146–150, 2018, https://doi.org/BZGC.0.2018-09-027.10.1109/ICICTA.2018.00041Search in Google Scholar

[53] X. Li, S. Zeng, S. Zheng, Y. Xiao, S. Zhang, and Q. Li, “Ceramic tile surface crack detection based on sliding filter and automatic region growth,” Adv. Laser Optoelectron., vol. 56, no. 21, pp. 41–47, 2019, https://doi.org/10.3788/LOP56.211003.Search in Google Scholar

[54] F. Du, W. Shi, Y. Deng, and Z. Zhu, “A fast infrared image segmentation method,” J. Infrared Millim. Waves, vol. 24, pp. 370–373, 2005, https://doi.org/10.3321/j.issn:1001-9014.2005.05.013.Search in Google Scholar

[55] C. Hua, X. Xiong, and Y. Chen, “Sobel operator-based feature extraction of workpiece circular contours,” Adv. Laser Optoelectron., vol. 55, no. 2, pp. 233–240, 2018.10.3788/LOP55.021011Search in Google Scholar

[56] R. Singh and A. Khare, “Fusion of multimodal medical images using Daubechies complex wavelet transform – a multiresolution approach,” Inf. Fusion, vol. 19, pp. 49–60, 2014, https://doi.org/10.1016/j.inffus.2012.09.005.Search in Google Scholar

[57] Q. Li, S. Zeng, S. Zheng, Y. Xiao, S. Zhang, and X. Li, “Machine vision-based detection method for surface crack of ceramic tile,” Laser Optoelectron. Prog., vol. 57, no. 8, 2020, https://doi.org/10.3788/LOP57.081004.Search in Google Scholar

[58] J. Park, B. Kwon, J. Park, and D. Kang, “Machine learning-based imaging system for surface defect inspection,” Int. J. Precis. Eng. Manuf. – Green Technol., vol. 3, no. 3, pp. 303–310, 2016, https://doi.org/10.1007/s40684-016-0039-x.Search in Google Scholar

[59] C. Tseng, J. Wu, and B. Liao, “Defect detection of skewed images for multilayer ceramic capacitors,” in 2009 Fifth International Conference on Intelligent Information Hiding and Multimedia Signal Processing, Kyoto, Japan, IEEE, 2009, pp. 840–843.10.1109/IIH-MSP.2009.315Search in Google Scholar

[60] N. Bao, X. Ran, Z. Wu, Y. Xue, and K. Wang, “Design of inspection system of glaze defect on the surface of ceramic pot based on machine vision,” in IEEE 2nd Information Technology, Networking, Electronic and Automation Control Conference, Chengdu, China, IEEE, 2017, pp. 1486–1492.10.1109/ITNEC.2017.8285043Search in Google Scholar

[61] S. Ye and L. Sun, “Method for detecting surface defects of ceramic tableware based on deep learning,” J. Phys. Conf., vol. 1650, pp. 32045–32053, 2020, https://doi.org/10.1088/1742-6596/1650/3/032045.Search in Google Scholar

[62] B. Teng, H. Zhao, P. Jia, J. Yuan, and C. Tian, “Research on ceramic sanitary ware defect detection method based on improved VGG network,” J. Phys. Conf., vol. 1650, pp. 22084–22091, 2020, https://doi.org/10.1088/1742-6596/1650/2/022084.Search in Google Scholar

[63] X. Jia, X. Yang, X. Yu, and H. Gao, “A modified center net for crack detection of sanitary ceramics,” in 46th Annual Conference of the IEEE Industrial Electronics Society, Singapore, IEEE, 2020, pp. 5311–5316.10.1109/IECON43393.2020.9254351Search in Google Scholar

[64] B. Min, H. Tin, A. Nasridinov, and K. H. Yoo, “Abnormal detection and classification in i-ceramic images,” in IEEE International Conference on Big Data and Smart Computing, Busan, Korea, IEEE, 2020, pp. 17–18.10.1109/BigComp48618.2020.0-106Search in Google Scholar

[65] L. Tang, Q. Li, W. Lu, R. He, F. Gong, and D. Zhang, “Research and implementation of ceramic valve spool surface defect detection system based on region and multilevel optimisation,” Nondestr. Test. Eval., vol. 34, no. 4, pp. 401–412, 2019, https://doi.org/10.1080/10589759.2019.1623217.Search in Google Scholar

[66] E. Yahaghi, M. Mirzapour, A. Movafeghi, P. Mohammadi Matin, and B. Rokrok, “FISTA algorithm for radiography images enhancement with background blurring removal,” Res. Nondestr. Eval., vol. 30, no. 2, pp. 80–88, 2019, https://doi.org/10.1080/09349847.2018.1476744.Search in Google Scholar

[67] E. Negahdarzadeh, E. Yahaghi, B. Rokrok, A. Movafeghi, and A. Keshavarz Khani, “Diagnosis of design and defects in radiography of ceramic antique objects using the wavelet-domain hidden Markov models,” J. Cult. Herit., vol. 35, pp. 56–63, 2019, https://doi.org/10.1016/j.culher.2018.07.005.Search in Google Scholar

[68] L. Li, X. Zhang, W. Li, X. Shao, Y. Xiang, and J. Sheng, “Visual Inspection Method of Ceramic Bottle Surface Defects Based on Niblack Optimization,” DEStech Trans. Comput. Sci. Eng., vol. 1, pp. 357–361, 2018, https://doi.org/10.12783/dtcse/cmee2017/20002.Search in Google Scholar

[69] K. Kim and Y. Woo, “Defect detection in ceramic images using sigma edge information and contour tracking method,” Int. J. Electr. Comput. Eng., vol. 6, no. 1, pp. 160–166, 2016, https://doi.org/10.11591/ijece.v6i1.9343.Search in Google Scholar

[70] K. Kim, D. Song, and W. Lee, “Flaw detection in ceramics using sigma fuzzy binarization and Gaussian filtering method,” Int. J. Multimed. Ubiquitous Eng., vol. 9, no. 1, pp. 403–414, 2014, https://doi.org/10.14257/ijmue.2014.9.1.37.Search in Google Scholar

[71] W. Lee, M. Ratnam, and Z. Ahmad, “Detection of fracture in ceramic cutting tools from workpiece profile signature using image processing and fast Fourier transform,” Precis. Eng., vol. 44, pp. 131–142, 2016, https://doi.org/10.1016/j.precisioneng.2015.11.001.Search in Google Scholar

[72] Y. Li, B. Zhou, H. Sun, G. Li, and S. Huang, “Research and development of honeycomb ceramics’ on-line automatic checkout system based on machine vision,” in IEEE 2013 2nd International Conference on Measurement, Information and Control, Harbin, China, IEEE, 2013, pp. 513–517.10.1109/MIC.2013.6758016Search in Google Scholar

[73] J. Wang, Y. Liu, D. Zhang, H. Peng, and Y. Zhu, “A new computer vision based multi-indentation inspection system for ceramics,” Multimed. Tool. Appl., vol. 76, no. 2, pp. 2495–2513, 2017, https://doi.org/10.1007/s11042-015-3223-z.Search in Google Scholar

[74] G. Desoli, S. Fioravanti, R. Fioravanti, and D. Corso, “A system for automated visual inspection of ceramic tiles,” in Conference of the IEEE Industrial Electronics Society, New Orlean, America, IEEE, 1993, pp. 1871–1876.10.1109/IECON.1993.339359Search in Google Scholar

[75] S. Vasilic and Z. Hocenski, “The edge detecting methods in ceramic tiles defects detection,” in 2006 IEEE International Symposium on Industrial Electronics, Cambridge, England, IEEE, 2006, pp. 469–472.10.1109/ISIE.2006.295640Search in Google Scholar

[76] Ž. Hocenski, S. Vasilić, and V. Hocenski, “Improved canny edge detector in ceramic tiles defect detection,” in 32nd Annual Conference on IEEE Industrial Electronics, Paris, France, 2006, pp. 3328–3331.10.1109/IECON.2006.347535Search in Google Scholar

[77] K. Ragab and N. Alsharay, “Developing parallel cracks and spots ceramic defect detection and classification algorithm using CUDA,” in 2017 IEEE 13th International Symposium on Autonomous Decentralized System, Bangkok, Thailand, 2017, pp. 255–261.10.1109/ISADS.2017.14Search in Google Scholar

[78] B. Bertalya, P. Prihandoko, R. Oktavina, and Y. Febrianto, “Classification of ceramic tiles by identifying defect on ceramic tile surface using local texture feature,” Adv. Mater. Res., vol. 789, pp. 257–261, 2013, https://doi.org/10.4028/www.scientific.net/AMR.789.257.Search in Google Scholar

[79] A. Birlutiu, A. Burlacu, M. Kadar, and D. Onita, “Defect detection in porcelain industry based on deep learning techniques,” in 2017 19th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, Timisoara, Romania, 2017, pp. 263–270.10.1109/SYNASC.2017.00049Search in Google Scholar

[80] L. Casagrande, L. Macarini, D. Bitencourt, A. Fröhlich, and G. Araujo, “A new feature extraction process based on SFTA and DWT to enhance classification of ceramic tiles quality,” Mach. Vis. Appl., vol. 31, no. 7, pp. 1–15, 2020, https://doi.org/10.1007/s00138-020-01121-1.Search in Google Scholar

[81] H. Elbehiery, A. Hefnawy, and M. Elewa, “Visual inspection for fired ceramic tile’s surface defects using wavelet analysis,” ICGST Int. J., vol. 5, no. 2, pp. 67–74, 2005.Search in Google Scholar

[82] H. Xiang, X. Wang, C. Leng, and J. Pan, “Optimization of a feal-time detection algorithm for surface defects of ceramic tiles,” Mech. Eng. Technol., vol. 8, no. 6, pp. 448–456, 2020, https://doi.org/10.12677/met.2019.86052.Search in Google Scholar

[83] Y. Samarawickrama and C. Wickramasinghe, “Matlab based automated surface defect detection system for ceremic tiles using image processing,” in 2017 6th National Conference on Technology and Management, Malabe, Sri Lanka, IEEE, 2017, pp. 34–39.10.1109/NCTM.2017.7872824Search in Google Scholar

[84] B. K. S. Angadi, “Crack detection in ceramic tiles using zoning and edge detection methods,” Int. J. Trend Sci. Res. Dev., vol. 57, no. 2, pp. 2844–2847, 2018, https://doi.org/10.31142/ijtsrd15724.Search in Google Scholar

[85] I. Novak and Z. Hocenski, “Texture feature extraction for a visual inspection of ceramic tiles,” IEEE Int. Symp. Ind. Electron., vol. 3, pp. 1279–1283, 2005, https://doi.org/10.1109/ISIE.2005.1529109.Search in Google Scholar

[86] R. Gonidjaya, B. Bertalya, and T. Kusuma, “Rectangularity defect detection for ceramic tile using morphological techniques,” ARPN J. Eng. Appl. Sci., vol. 9, pp. 2052–2056, 2014.Search in Google Scholar

[87] H. Liu, S. Chen, and D. Perng, “Defect inspection of patterned thin-film ceramic light-emitting diode substrate using a fast randomized principal component analysis,” IEEE Trans. Semicond. Manuf., vol. 29, no. 3, pp. 248–256, 2016, https://doi.org/10.1109/TSM.2016.2568238.Search in Google Scholar

[88] F. Najafabadi and H. Pourghassem, “Corner defect detection based on dot product in ceramic tile images,” in 2011 IEEE 7th International Colloquium on Signal Processing and Its Applications, Penang, Malaysia, IEEE, 2011, pp. 293–297.10.1109/CSPA.2011.5759890Search in Google Scholar

[89] M. Mansoory, H. Tajik, G. Mohamadi, and M. Pashna, “Edge defect detection in ceramic tile based on boundary analysis using fuzzy thresholding and radon transform,” in 8th IEEE International Symposium on Signal Processing and Information Technology, Darmstadt, Germany, IEEE, 2008, pp. 58–62.10.1109/ISSPIT.2008.4775686Search in Google Scholar

[90] S. Hanzaei, A. Afshar, and F. Barazandeh, “Automatic detection and classification of the ceramic tiles’ surface defects,” Pattern Recogn., vol. 66, pp. 174–189, 2017, https://doi.org/10.1016/j.patcog.2016.11.021.Search in Google Scholar

[91] Z. Hocenski, T. Keser, and A. Baumgartner, “A simple and efficient method for ceramic tile surface defects detection,” in 2007 IEEE International Symposium on Industrial Electronics, Athens, Greece, IEEE, 2007, pp. 1606–1611.10.1109/ISIE.2007.4374844Search in Google Scholar

[92] L. Yang, M. Chong, Q. Li, and J. Li, “An intelligent defect detection method of small sized ceramic tile using machine vision,” in The 3rd International Conference on Mechatronics Control Technology and Transportation, Changsha, China, Springer, 2018, pp. 424–430.10.5220/0006972104270433Search in Google Scholar

[93] M. Smith and R. Stamp, “Automated inspection of textured ceramic tiles,” Comput. Ind., vol. 43, no. 1, pp. 73–82, 2000, https://doi.org/10.1016/S0166-3615(00)00052-X.Search in Google Scholar

[94] C. Boukouvalas, J. Kittler, R. Marik, and M. Petrou, “Color grading of randomly textured ceramic tiles using color histograms,” IEEE Trans. Ind. Electron., vol. 46, no. 1, pp. 219–226, 1999, https://doi.org/10.1109/41.744415.Search in Google Scholar

[95] D. Aborisade and J. Ojo, “Novel defect segmentation technique in random textured tiles,” Int. J. Sci. Eng. Res., vol. 2, no. 10, 2011.Search in Google Scholar

[96] Z. Hocenski, I. Aleksi, and R. Mijakovic, “Ceramic tiles failure detection based on FPGA image processing,” IEEE Int. Symp. Ind. Electron., vol. 40, pp. 2169–2174, 2009, https://doi.org/10.1109/ISIE.2009.5219911.Search in Google Scholar

[97] Ž. Hocenski and T. Keser, “Failure detection and isolation in ceramic tile edges based on contour descriptor analysis,” in 2007 Mediterranean Conference on Control and Automation, MED, Athens, Greece, IEEE, 2007, pp. 1–6.10.1109/MED.2007.4433713Search in Google Scholar

[98] S. Emam and S. Sayyedbarzani, “Dimensional deviation measurement of ceramic tiles according to ISO 10545-2 using the machine vision,” Int. J. Adv. Manuf. Technol., vol. 100, no. 5, pp. 1405–1418, 2019, https://doi.org/10.1007/s00170-018-2781-4.Search in Google Scholar

[99] N. Ahamad and J. Rao, “Analysis and detection of surface defects in ceramic tile using image processing techniques,” Microelectron. Electromagn. Telecommun., vol. 372, pp. 575–582, 2016, https://doi.org/10.1007/978-81-322-2728-1_54.Search in Google Scholar

[100] H. Elbehiery, A. Hefnawy, and M. Elewa, “Surface defects detection for ceramic tiles using image processing and morphological techniques,” Proc. World Acad. Sci. Eng. Technol., vol. 5, pp. 158–162, 2005, https://doi.org/10.5281/zenodo.1084534.Search in Google Scholar

[101] A. Sioma, “Automated control of surface defects on ceramic tiles using 3D image analysis,” Materials, vol. 13, no. 5, pp. 1250–1262, 2020, https://doi.org/10.3390/ma13051250.Search in Google Scholar PubMed PubMed Central

[102] Z. Hocenski, T. Matić, and I. Vidović, “Technology transfer of computer vision defect detection to ceramic tiles industry,” in International Conference on Smart Systems and Technologies, Osijek, Croatia, IEEE, 2016, pp. 301–305.10.1109/SST.2016.7765678Search in Google Scholar

[103] Z. Zhou, Q. Lu, Z. Wang, and H. Huang, “Detection of micro-defects on irregular reflective surfaces based on improved faster R-CNN,” Sensors, vol. 19, no. 22, pp. 1–15, 2019, https://doi.org/10.3390/s19225000.Search in Google Scholar PubMed PubMed Central

[104] J. Silveira, M. Ferreira, C. Santos, and T. Martins, “Computer vision techniques applied to the quality control of ceramic plates,” in 2009 IEEE International Conference on Industrial Technology, Victoria, Australia, IEEE, 2009, pp. 1–6.Search in Google Scholar

[105] S. Li and Y. Chen, “Research on intelligent classification system of ceramic tiles based on machine vision,” Appl. Mech. Mater., vol. 101, pp. 648–651, 2012, https://doi.org/10.4028/www.scientific.net/AMM.101-102.648.Search in Google Scholar

[106] R. Mishra and D. Shukla, “An automated ceramic tiles defect detection and classification system based on artificial neural network,” Int. J. Emerg. Technol. Adv. Eng., vol. 4, no. 3, pp. 229–233, 2014.Search in Google Scholar

[107] Z. Hocenski and E. Nyarko, “Surface quality control of ceramic tiles using neural networks approach,” in IEEE International Symposium on Industrial Electronics, L’Ayuila, Italy, 2002, pp. 657–660.10.1109/ISIE.2002.1026369Search in Google Scholar

[108] T. Keser, Ž. Hocenski, and V. Hocenskp, “Intelligent machine vision system for automated quality control in ceramic tiles industry,” Strojarstvo, vol. 52, no. 2, pp. 105–114, 2010.Search in Google Scholar

[109] C. Boukouvalas, J. Kittler, R. Marik, M. Mirmehdi, and M. Petrou, “Ceramic tile inspection for colour and structural defects,” in Proceedings of AMPT95, Hungerford Hill, Australia, 1995, pp. 390–399.Search in Google Scholar

[110] B. Mariyadi, N. Fitriyani, and T. Sahroni, “2D Detection model of defect on the surface of ceramic tile by an artificial neural network,” J. Phys. Conf., vol. 1764, no. 1, pp. 12176–12183, 2021, https://doi.org/10.1088/1742-6596/1764/1/012176.Search in Google Scholar

[111] D. Havryliv, O. Ivakhiv, and M. Semenchenko, “Defect detection on the surface of the technical ceramics using image processing and deep learning algorithms,” in 2020 21st International Conference on Research and Education in Mechatronics, Cracow, Poland, 2020, pp. 1–3.10.1109/REM49740.2020.9313910Search in Google Scholar