Home PPS news
Article
Licensed
Unlicensed Requires Authentication

PPS news

Published/Copyright: March 3, 2022
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 20 Issue 4

Published Online: 2022-03-03

© 2005 Hanser Publishers, Munich

Articles in the same Issue

  1. Contents
  2. Regular Contributed Articles
  3. An Improvement on Design of Sheet Extrusion Dies
  4. Organic-Inorganic Hybrid Material Synthesis by on Line Coupling Twin Screw Extruder with a Microwave Oven
  5. Water Penetration Stability in Water Assisted Injection Molded Symmetric Ribs
  6. A New Plasticating Model for Amorphous and Semi-crystalline Polymers in Single Screw Extruders
  7. Simultaneous Biaxial Stretching of Polypropylene Resins of Varying Tacticity
  8. Optimization of a Flat Die Including Elongational Viscosity Effects
  9. Experimental Study on Factors Influencing Throughput Rate and Process of Polymer-Mineral Filler Mixing in a Twin Screw Extruder
  10. 3D Finite Element Simulation of Processing of Generalized Newtonian Fluids in Counter-rotating and Tangential TSE and Die Combination
  11. Simulation of Heat Transfer in Laser Transmission Welding
  12. Influence of Power Law and Isothermal Simplification on the Accuracy in Single Screw Extrusion
  13. Melt Intercalation in Montmorillonite/Polystyrene Nanocomposites
  14. Experimental Investigation of the Effect of the Bubble Cone on the Cooling Jets used in the Blown Film Manufacturing Process
  15. Molding of Thin Sheets Using Impact Micro-injection Molding
  16. Rapid communications
  17. Ultrasonic Vibration Hot Embossing
  18. PPS news
  19. PPS news
  20. Seikei-kakou abstracts
  21. Seikei-kakou abstracts
https://doi.org/10.1515/ipp-2005-0075

Articles in the same Issue

  1. Contents
  2. Regular Contributed Articles
  3. An Improvement on Design of Sheet Extrusion Dies
  4. Organic-Inorganic Hybrid Material Synthesis by on Line Coupling Twin Screw Extruder with a Microwave Oven
  5. Water Penetration Stability in Water Assisted Injection Molded Symmetric Ribs
  6. A New Plasticating Model for Amorphous and Semi-crystalline Polymers in Single Screw Extruders
  7. Simultaneous Biaxial Stretching of Polypropylene Resins of Varying Tacticity
  8. Optimization of a Flat Die Including Elongational Viscosity Effects
  9. Experimental Study on Factors Influencing Throughput Rate and Process of Polymer-Mineral Filler Mixing in a Twin Screw Extruder
  10. 3D Finite Element Simulation of Processing of Generalized Newtonian Fluids in Counter-rotating and Tangential TSE and Die Combination
  11. Simulation of Heat Transfer in Laser Transmission Welding
  12. Influence of Power Law and Isothermal Simplification on the Accuracy in Single Screw Extrusion
  13. Melt Intercalation in Montmorillonite/Polystyrene Nanocomposites
  14. Experimental Investigation of the Effect of the Bubble Cone on the Cooling Jets used in the Blown Film Manufacturing Process
  15. Molding of Thin Sheets Using Impact Micro-injection Molding
  16. Rapid communications
  17. Ultrasonic Vibration Hot Embossing
  18. PPS news
  19. PPS news
  20. Seikei-kakou abstracts
  21. Seikei-kakou abstracts
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 26.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/ipp-2005-0075/html
Scroll to top button