Article
Publicly Available
Award/Preisverleihung
-
Lasar S. Shvindlerman
Published/Copyright:
February 16, 2022
den Werner-Köster-Preis 2004
für die Aufsätze Kinematics of connected grain boundaries in 2D und Efficiency of drag mechanisms for inhibition of grain growth in nanocristalline materials in der Zeitschrift für Metallkunde 95 (2004) 219 und 239.
In den beiden Aufsätzen wird erstmals ein quantitatives Konzept vorgestellt, das den Beitrag der Korngrenzen-Tripelpunkte zur Stabilität von polykristallinen Gefügen feinkörniger und nanostruk-turierter Werkstoffe beschreibt. Diese Beiträge, denen ein hoher Rang in der Materialforschung zukommt, sind zugleich ein eindrucksvolles Beispiel für die langjährige Zusammenarbeit zwischen dem Institut für Metallkunde und Metallphysik der RWTH Aachen und dem Institut für Festkörperphysik der Russischen Akademie der Wissenschaften in Chernogolovka.
DGM-Tag 2005 in Hanau Mai 2005
Published Online: 2022-02-16
© 2005 Carl Hanser Verlag, München
Articles in the same Issue
- Frontmatter
- Kösterpreis
- Award/Preisverleihung
- Editorial
- Editorial
- Articles Basic
- Effect of interface strength on electromigration-induced inlaid copper interconnect degradation: Experiment and simulation
- Application of factor analysis in electron spectrometry (AES, XPS) for materials science
- Focussing and defocussing effects at radio frequency glow discharge optical emission spectroscopy analyses of thin films with partly nonconductive components
- Semi-flexible star-shaped molecules: conformational analysis of nano-segregated mesogens forming columnar liquid-crystal phases
- Articles Applied
- Structure, properties and applications of diamond-like carbon coatings prepared by reactive magnetron sputtering
- Local texture and back-end defect in hot extruded AZ91 magnesium alloy
- A comparison of thermal stability in nanocrystalline Ni- and Co-based materials
- Microstructure and phase formation of Heusler thin film compounds
- Correlation between the average composition of coherent superlattice and the GMR properties of electrodeposited Co–Cu/Cu multilayers
- Articles Basic
- Towards a description of complex pearlite structures
- Modeling of axial strain in free-end torsion of textured copper
- Vacancies in plastically deformed copper
- An analytic and generalized formulation of the sin2 ψ-method
- Nanoindentation applied on a tungsten–copper composite before and after high-pressure torsion
- Articles Applied
- The local deformation behaviour of MMCs – an experimental study
- X-ray elastic constants determined by the combination of sin2 ψ and substrate-curvature methods
- Combining complementary techniques to study precipitates in steels
- Precipitation hardening in Mg–Zn–Sn alloys with minor additions of Ca and Si
- Notifications/Mitteilungen
- Personal
Articles in the same Issue
- Frontmatter
- Kösterpreis
- Award/Preisverleihung
- Editorial
- Editorial
- Articles Basic
- Effect of interface strength on electromigration-induced inlaid copper interconnect degradation: Experiment and simulation
- Application of factor analysis in electron spectrometry (AES, XPS) for materials science
- Focussing and defocussing effects at radio frequency glow discharge optical emission spectroscopy analyses of thin films with partly nonconductive components
- Semi-flexible star-shaped molecules: conformational analysis of nano-segregated mesogens forming columnar liquid-crystal phases
- Articles Applied
- Structure, properties and applications of diamond-like carbon coatings prepared by reactive magnetron sputtering
- Local texture and back-end defect in hot extruded AZ91 magnesium alloy
- A comparison of thermal stability in nanocrystalline Ni- and Co-based materials
- Microstructure and phase formation of Heusler thin film compounds
- Correlation between the average composition of coherent superlattice and the GMR properties of electrodeposited Co–Cu/Cu multilayers
- Articles Basic
- Towards a description of complex pearlite structures
- Modeling of axial strain in free-end torsion of textured copper
- Vacancies in plastically deformed copper
- An analytic and generalized formulation of the sin2 ψ-method
- Nanoindentation applied on a tungsten–copper composite before and after high-pressure torsion
- Articles Applied
- The local deformation behaviour of MMCs – an experimental study
- X-ray elastic constants determined by the combination of sin2 ψ and substrate-curvature methods
- Combining complementary techniques to study precipitates in steels
- Precipitation hardening in Mg–Zn–Sn alloys with minor additions of Ca and Si
- Notifications/Mitteilungen
- Personal
