Austenitic stainless steels of high strength and ductility
-
Markus O. Speidel
und
Hannes J. C. Speidel
Abstract
High strength and high ductility together are prime requirements for modern structural metallic materials. Important industrial examples are steels for car components such as body sheets, tubes and forgings. The present paper traces two lines of alloy development, stable austenitic stainless steels and intentionally metastable austenitic stainless steels. Although both groups have different advantages and disadvantages, each one exceeds all other presently available structural metallic materials in terms of strength to density ratio at equal ductility.
Abstract
Die Legierungsentwicklung stabiler und metastabiler austenitisch rostfreier Stähle wird vergleichend dargestellt. Beide Gruppen von Stählen haben unterschiedliche Vorzüge und Nachteile, aber jede Gruppe übertrifft alle anderen heute verfügbaren metallischen Strukturwerkstoffe in Bezug auf das Festigkeit-zu-Dichte Verhältnis bei gegebener Verformbarkeit. Mögliche Anwendungsbereiche schließen die Automobilindustrie mit ein.
References
[1] M.O. Speidel: Z. Metallkd. 94 (2003) 119.10.3139/146.030719Suche in Google Scholar
[2] M.O. Speidel, M.L. Zheng, in: High Nitrogen Steels, vdf Hochschulverlag AG (2003) 63.Suche in Google Scholar
[3] G. Saller, H. Aigner, in: High Nitrogen Steels, vdf Hochschulverlag AG (2003) 129.Suche in Google Scholar
[4] M.O. Speidel, in: Stickstofflegierte Stähle, Verlag ,,Thubal-Kain“ (1991) 1.Suche in Google Scholar
[5] H.J.C. Speidel, M.O. Speidel: Materials and Manufacturing Processes 19 (2004) 95.10.1081/AMP-120027518Suche in Google Scholar
[6] Y.H. Kim, K.Y. Kim, Y.D. Lee, in: High Nitrogen Steels, vdf Hochschulverlag AG (2003) 149.Suche in Google Scholar
[7] M.O. Speidel, in: High Nitrogen Steels, vdf Hochschulverlag AG (2003) 1.Suche in Google Scholar
[8] M.O. Speidel, M.L. Zheng, C. Kowanda, H.J.C. Speidel, M. Diener: Trans. Indian Inst. Met. 56 (2003) 281.Suche in Google Scholar
© 2004 Carl Hanser Verlag, München
Artikel in diesem Heft
- Frontmatter
- Editorial
- 50 Jahre Metallkunde-Kolloquium am Arlberg
- Articles Basic
- Microstructure and mechanical properties of Si and YN doped powder metallurgical tantalum
- Mechanical model for the deformation of the wood cell wall
- Physical metallurgy of high Nb-containing TiAl alloys
- Phase and microstructure selection in peritectic alloys under high G-V ratio
- Austenitic stainless steels of high strength and ductility
- Articles Applied
- Charakterisierung von Dual-Phasen- und TRIP-Stählen mittels Nanohärte und Röntgendiffraktometrie
- Mechanische Zuverlässigkeit von keramischen Kaltleiterbauelementen – Möglichkeiten zur Verbesserung
- Physical and materials aspects of photonic crystals for microwaves and millimetre waves
- In-situ investigation of strain relaxation in an Al/Si–MMC using high energy synchrotron radiation
- Sigma-phase in duplex-stainless steels
- Evolution of texture in Alloy 80A during initial ingot breakdown
- Characterisation of precipitates in a stainless maraging steel by three-dimensional atom probe and small-angle neutron scattering
- Modifikation von Titanlegierungen für medizinische Anwendungen
- Residual stresses in forged IN718 turbine discs
- Notifications/Mitteilungen
- Personal/Personelles
Artikel in diesem Heft
- Frontmatter
- Editorial
- 50 Jahre Metallkunde-Kolloquium am Arlberg
- Articles Basic
- Microstructure and mechanical properties of Si and YN doped powder metallurgical tantalum
- Mechanical model for the deformation of the wood cell wall
- Physical metallurgy of high Nb-containing TiAl alloys
- Phase and microstructure selection in peritectic alloys under high G-V ratio
- Austenitic stainless steels of high strength and ductility
- Articles Applied
- Charakterisierung von Dual-Phasen- und TRIP-Stählen mittels Nanohärte und Röntgendiffraktometrie
- Mechanische Zuverlässigkeit von keramischen Kaltleiterbauelementen – Möglichkeiten zur Verbesserung
- Physical and materials aspects of photonic crystals for microwaves and millimetre waves
- In-situ investigation of strain relaxation in an Al/Si–MMC using high energy synchrotron radiation
- Sigma-phase in duplex-stainless steels
- Evolution of texture in Alloy 80A during initial ingot breakdown
- Characterisation of precipitates in a stainless maraging steel by three-dimensional atom probe and small-angle neutron scattering
- Modifikation von Titanlegierungen für medizinische Anwendungen
- Residual stresses in forged IN718 turbine discs
- Notifications/Mitteilungen
- Personal/Personelles
