Abstract
The selective oxidation of ammonia to hydroxylamine using titanium silicalite-1 as a catalyst with an increasing content range of 1–2.5 wt% TiO2 was systematically investigated in a batch reactor. The hydroxylamine yielded 33, 43, 52 and 62% at reaction temperatures of 50, 60, 70 and 80°C, respectively, for 8 min using a TS-1a catalyst, which contained 2.5% TiO2. The molar ratio of 15 NH3/H2O2 was kept during these reactions. Experiments were also conducted with different amounts of NH3/H2O2 in molar ratios, which were between 7 and 60 to investigate the effect of NH3/H2O2 molar ratio on the reactions. Reactions with higher ratios of NH3/H2O2 were seen to have a higher yield at the end of the reaction performance time.
Acknowledgment
This work was supported by Scientific Research Projects Coordination Unit of Istanbul University, Project Number 3314 and UDP-25184.
References
1. RitzJ, FuchsH, KieczkaH, MoranW. Caprolactam. Ullmann’s encyclopedia of industrial chemistry. Weinheim (Germany): Wiley-VCH, 2005.Suche in Google Scholar
2. RitzJ, FuchsH, PerrymanHG. Hydroxylamine. Ullmann’s encyclopedia of industrial chemistry. Weinheim (Germany: Wiley-VCH, 2005.Suche in Google Scholar
3. NicolGW, SchleperC. Ammonia-oxidising Crenarchaeota: important players in the nitrogen cycle?Trends Microbiol2006;14:207–12.10.1016/j.tim.2006.03.004Suche in Google Scholar
4. SimonJ, KlotzMG. Diversity and evolution of bioenergeticsystems involved in microbial nitrogen compoundtransformations. Biochim Biophys Acta BBA – Bioenerg2013;1827:114–35.10.1016/j.bbabio.2012.07.005Suche in Google Scholar
5. RaschigF. Process for the manufacture of alkali earth salts of hydroxylamine disulfonic acid. US Patent 1010177, 1911.Suche in Google Scholar
6. JockersK, MeierH, WistersbergerK. Production of hydroxylamine salts by reduction of nitric oxide. US Patent 2828101, 1955.Suche in Google Scholar
7. JonesLR. Process for producing hydroxylammonium salts. US Patent 2755171, 1955.Suche in Google Scholar
8. MantegazzaMA, PadovanM, PetriniG, RoffiaP. Direct catalytic process for the production of hydroxylamine. US Patent 5320819A, 1994.Suche in Google Scholar
9. LewdorowiczW, TokarzW, PielaP, WronaPK. Synthesis of hydroxylamine in the nitric oxide – hydrogen fuel cell. J New Mater Electrochemical Syst2006;9:339–43.Suche in Google Scholar
10. WangXS, GuoXW. Synthesis, characterization and catalytic properties of low cost titanium silicalite. Catalysis Today1999;51:177–86.10.1016/S0920-5861(99)00020-6Suche in Google Scholar
11. ThieleGF, RolandE. Propylene epoxidation with hydrogen peroxide and titanium silicalite catalyst: activity, deactivation and regeneration of the catalyst. J Mol Catal Chem1997;117:351–6.10.1016/S1381-1169(96)00266-XSuche in Google Scholar
12. WangQ, WangL, ChenJ, WuY, MiZ. Deactivation and regeneration of titanium silicalite catalyst for epoxidation of propylene. J Mol Catal Chem2007;273:73–80.10.1016/j.molcata.2007.03.068Suche in Google Scholar
13. HuangW, TamilmaniS, RaghavanS, SmallR. Dissolution of copper thin films in hydroxylamine-based solutions. Int J Miner Process2003;72:365–72.10.1016/S0301-7516(03)00111-XSuche in Google Scholar
14. PetersonML, SmallRJ, TruongT, LeeJ. Challenges of electroplated copper film and device characteristics for copper slurry design. Chemical Mechanical Planarization in IC Device Manufacturing III: Proceedings of the International Symposium, 2000:112–17.Suche in Google Scholar
15. SmallRJ, McgheeL, MaloneyD, PattersonML. Chemical mechanical polishing composition and process. US Patent 6117783, 2000.Suche in Google Scholar
16. PrinciE, ViciniS, PedemonteE, ProiettiN, CapitaniD, SegreAL, et al. Physical and chemical characterization of cellulose based textiles modified by periodate oxidation. Macromol Symp Integr2004;218:343–52.10.1002/masy.200451435Suche in Google Scholar
17. MantegazzaMA, PadovanM, PetriniG, RoffiaP. Direct catalytic process for the production of hydroxylamine. EP Patent 0522634, 2001.Suche in Google Scholar
18. MantegazzaMA, PadovanM, PetriniG, RoffiaP. Direct catalytic process for the production of hydroxylamine. CA Patent 2073231, 2002.Suche in Google Scholar
19. NotariB. Titanium silicalite: a new selective oxidation catalyst. Stud Surf Sci Catal1991;67:243–56.10.1016/S0167-2991(08)61943-6Suche in Google Scholar
20. TaramassoM, PeregoG, NotariB. Preparation of porous crystalline synthetic material comprised of silicon and titanium oxides. US Patent 4410501, 1983.Suche in Google Scholar
21. WróblewskaA, FajdekA. Epoxidation of allyl alcohol to glycidol over the microporous TS-1 catalyst. J Hazard Mater2010;179:258–65.10.1016/j.jhazmat.2010.02.088Suche in Google Scholar
22. BellussiG, PeregoC. Industrial catalytic aspects of thesynthesis of monomers for nylon production. Cattech2000;4:4–16.10.1023/A:1011905009608Suche in Google Scholar
23. MilliniR, MassaraEP, PeregoG, BellussiG. Framework composition of titanium silicalite-1. J Catal1992;37:497–503.10.1016/0021-9517(92)90176-ISuche in Google Scholar
24. CundyCS, ForrestJO. Some observations on the preparation and properties of colloidal silicalites part ii: preparation, characterisation and properties of colloidal silicalite-1 TS-1 silicalite-2 and TS-2. Microporous Mesoporous Mater2004;72:67–80.10.1016/j.micromeso.2003.08.021Suche in Google Scholar
25. DenizCU, AkmazS, YasarM. Effect of TS-1 catalyst on the hydroxylamine production. International Symposium on Chemical Reaction Engineering ISCRE-22, Maastricht, Netherlands, September 2–5, 2012.10.1515/gps-2012-0014Suche in Google Scholar
26. SahbariJJ, RussellJW. Method of manufacturing high purity oximes from aqueous hydroxylamine and ketones. US Patent 6235935, 2001.Suche in Google Scholar
27. LiG, WangXS, GuoX, LiuS, ZhaoQ, BaoX, et al. Titanium species in titanium silicalite TS-1 prepared by hydrothermal method. Mater Chem Phys2001;71:195–201.10.1016/S0254-0584(01)00281-4Suche in Google Scholar
28. TrongOD, KapoorMP, ThibaultE, GallotJE, LemayG,KaliaguineS. Influence of high-energy ball milling on the physico-chemical and catalytic properties of titanium silicalite TS-1. Microporous Mesoporous Mater1998;20:107–18.10.1016/S1387-1811(97)00002-4Suche in Google Scholar
29. WangXS, GuoXW, LiG. Synthesis of titanium silicalite(TS-1) from the TPABr system and its catalytic propertiesfor epoxidation of propylene. Catalysis Today2002;74:65–75.10.1016/S0920-5861(01)00531-4Suche in Google Scholar
30. ZhaoQ, BaoXH, HanXW, LiuXM, TanDL, LinLW, et al. Studies on the crystallization process of titanium silicalite-1 (TS-1) synthesized using tetrapropylammonium bromide as a template. Mater Chem Phys2000;66:41–50.10.1016/S0254-0584(00)00278-9Suche in Google Scholar
31. BoultifA, LouerD. Indexing of powder diffraction patterns for low-symmetry lattice by successive dichotomy method. J Appl Crystalogr1991;24:987–93.10.1107/S0021889891006441Suche in Google Scholar
32. GaoH, LuW, ChenQ. Characterization of titanium silicalite-1 prepared from aqueous TiCl3. Microporous Mesoporous Mater2000;34:307–15.10.1016/S1387-1811(99)00183-3Suche in Google Scholar
33. ThangarajA, EapenMJ, SivasankerS, RatnasamyP. Studies on the synthesis of titanium silicalite, TS-1. Zeolites1992;12:943–50.10.1016/0144-2449(92)90159-MSuche in Google Scholar
34. ZhangH, LiuY, JiaoZ, HeM, WuP. Hydrothermal synthesis of titanium silicalite-1 structurally directed by hexamethyleneimine. Ind Eng Chem Res2009;48:4334–9.10.1021/ie8016253Suche in Google Scholar
35. NotariB. Microporous crystalline titanium silicates. Adv Catalysis1996;41:253–334.10.1016/S0360-0564(08)60042-5Suche in Google Scholar
36. MantegazzaMA, LeofantiG, PetriniG, PadovanM, ZecchinaA, BordigaS. Selective oxidation of ammonia to hydroxylamine with hydrogen peroxide on titanium based catalysts. Stud Surf Sci Catal1994;82:541–50.10.1016/S0167-2991(08)63447-3Suche in Google Scholar
37. ZecchinaA, SpotoG, BordigaS, GeoboldoF, PetriniG, LeofantiG, et al. Ammoximation of cyclohexanone on titanium silicalite: investigation of the reaction mechanism. Stud Surface Sci Catalysis1993;75:719–29.10.1016/S0167-2991(08)64051-3Suche in Google Scholar
©2013 by Walter de Gruyter Berlin / Boston
Artikel in diesem Heft
- Masthead
- Masthead
- Efficient Synthesis of 1-Acetylpyrene Using [Bmim]Cl–FeCl3 Ionic Liquid as Dual Catalyst and Solvent
- Ethanol Steam Reforming for Hydrogen Production in Microchannel Reactors: Experimental Design and Optimization
- Modeling NOx Adsorption onto Fe/ZSM-5 Catalysts in a Fixed Bed Reactor
- Multistep Optimization and Residue Disposal Study for Electrochemical Treatment of Textile Wastewater Using Aluminum Electrode
- Effect of Vibrating Sparger on Mass Transfer, Gas Holdup, and Bubble Size in a Bubble Column Reactor
- Production of Silicon from SiH4 in a Fluidized Bed, Operation and Results
- Reforming of Glycerol into Bio-Crude: A Parametric Study
- Hydrodynamic and Mass Transfer Characteristics in a Large-Scale Slurry Bubble Column Reactor for Gas Mixtures in Actual Fischer–Tropsch Cuts
- Optimization of l-Asparaginase Production by Isolated Aspergillus niger C4 from Sesame (black) Oil Cake under SSF using Box–Behnken Design in Column Bioreactor
- Simplified Kinetic Model for Thermal Combustion of Lean Methane–Air Mixtures in a Wide Range of Temperatures
- Identification and Optimization of Recombinant E. coli Fed-Batch Fermentation Producing γ-Interferon Protein
- A Comparison of Monomeric Phenols Produced from Lignin by Fast Pyrolysis and Hydrothermal Conversions
- Design and Optimization of a Fixed Bed Reactor for Direct Dimethyl Ether Production from Syngas Using Differential Evolution Algorithm
- Conversion Enhancement of Fixed-Bed Reactors Using Two-Dimensional Hollow Cylindrical Catalyst Pellet
- Bubble Columns with Internals: A Review
- A Historic Review on R&D of China’s FCC Riser Termination Device Technologies
- Recent Advances of Spout-Fluid Bed: A Review of Fundamentals and Applications
- Ethanol Catalytic Oxidation on Ordered Mesoporous CuO/KIT-6 Catalyst
- A Novel Kinetics Study on H2O2 Decomposition inthe Propylene Epoxidation System in a Fixed-Bed Reactor
- Implementation of Homotopy Perturbation Method to Solve a Population Balance Model in Fluidized Bed
- Experimental Research on Utilization of Steel Rolling Sludge in Sintering Process
- Application of Honey-Bee Mating Optimization to Naphtha Reforming Reactor
- Modeling and Simulation of a Fischer–Tropsch Slurry Bubble Column Reactor Using Different Kinetic Rate Expressions for Iron and Cobalt Catalysts
- Solids Suspension Study in a Side-Entering Stirred Tank Through CFD Modeling
- Triphase Catalysis Using Silica Gel as Support
- Enhanced Trichloroethylene CatalyticOxidation on Modified Lanthanum Manganite ano-Perovskites
- A Novel Reactor for Microwave Hydrothermal Scale-up Nanopowder Synthesis
- Production of Amino and Organic Acids from Protein Using Sub-Critical Water Technology
- Purification of Crude Glycerine Obtained from Transesterification of Cottonseed Oil
- Predicting the Liquid Film Thickness and Droplet–Gas Flow in Effervescent Atomization: Influence of Operating Conditions and Fluid Viscosity
- Zinc-Modified MCM-22 as Potential Solid acid Catalyst for Friedel–Crafts Alkylation Reaction
- Dynamic Characteristics and Speed Control Strategy of Cellulose Hydrolysis Reactor at High Solids Loading
- Kinetic Study of Light Mercaptans in the Presence of Merox Catalyst and Caustic Soda
- Applications of Feed-Forward Neural Network to Study Irregular-Shape Particle Effects on Hydrodynamics Behavior in a Liquid–Solid Circulating Fluidized Bed Riser
- Experimental Investigation on the Translational and Rotational Motion of Biomass Particle in a Spout-Fluid Bed
- Industrial Methanol from Syngas: Kinetic Study and Process Simulation
- Study of Co-pyrolysis Characteristics of Lignite and Rice Husk in a TGA and a Fixed-Bed Reactor
- Exergy Analysis of Oxidative Steam Reforming of Methanol for Hydrogen Producton: Modeling Study
- Lead (II) Pollution Enhances the Binding of Transgenic Toxin in Brown and Red Soils: Equilibrium and Kinetics
- Influence of a Second Liquid Phase upon Carbon Dioxide Chemical Absorption
- Brackish Water Desalination by Electrodialysis: CaCO3 Scaling Monitoring During Batch Recirculation Operation
- The Effect of TiO2 Contained within a Titanium Silicalite (TS-1) Catalyst and on the Selective Oxidation of Ammonia
- Understanding Pt–Rh Synergy in a Three-Way Catalytic Converter
- Mathematical Modelling of Microwave Pyrolysis
- Photocatalytic Purification of Wastewater Polluted by Odorant Sulfur Compounds Using Titanium Oxide in a Continuous Photoreactor
- Adsorption Kinetics of Oxytetracycline onto Activated Carbon in a Closed-Loop Fixed Bed Reactor
- Catalytic Wet Peroxide Oxidation of Chlorophenol Over a Ce0.86Cu0.14–xO2 Catalyst
- Chemical Reaction Effect upon Gas–Liquid Interfacial Area in a Bubble Column Reactor
- Comparative Studies on Nitrophenol Removal byAdsorption and Simultaneous Adsorption-Biodegradation Processes
- Ultrasound-Assisted Enzymatic Synthesis of Poly-ε-Caprolactone: Kinetic Behavior and ReactorDesign
Artikel in diesem Heft
- Masthead
- Masthead
- Efficient Synthesis of 1-Acetylpyrene Using [Bmim]Cl–FeCl3 Ionic Liquid as Dual Catalyst and Solvent
- Ethanol Steam Reforming for Hydrogen Production in Microchannel Reactors: Experimental Design and Optimization
- Modeling NOx Adsorption onto Fe/ZSM-5 Catalysts in a Fixed Bed Reactor
- Multistep Optimization and Residue Disposal Study for Electrochemical Treatment of Textile Wastewater Using Aluminum Electrode
- Effect of Vibrating Sparger on Mass Transfer, Gas Holdup, and Bubble Size in a Bubble Column Reactor
- Production of Silicon from SiH4 in a Fluidized Bed, Operation and Results
- Reforming of Glycerol into Bio-Crude: A Parametric Study
- Hydrodynamic and Mass Transfer Characteristics in a Large-Scale Slurry Bubble Column Reactor for Gas Mixtures in Actual Fischer–Tropsch Cuts
- Optimization of l-Asparaginase Production by Isolated Aspergillus niger C4 from Sesame (black) Oil Cake under SSF using Box–Behnken Design in Column Bioreactor
- Simplified Kinetic Model for Thermal Combustion of Lean Methane–Air Mixtures in a Wide Range of Temperatures
- Identification and Optimization of Recombinant E. coli Fed-Batch Fermentation Producing γ-Interferon Protein
- A Comparison of Monomeric Phenols Produced from Lignin by Fast Pyrolysis and Hydrothermal Conversions
- Design and Optimization of a Fixed Bed Reactor for Direct Dimethyl Ether Production from Syngas Using Differential Evolution Algorithm
- Conversion Enhancement of Fixed-Bed Reactors Using Two-Dimensional Hollow Cylindrical Catalyst Pellet
- Bubble Columns with Internals: A Review
- A Historic Review on R&D of China’s FCC Riser Termination Device Technologies
- Recent Advances of Spout-Fluid Bed: A Review of Fundamentals and Applications
- Ethanol Catalytic Oxidation on Ordered Mesoporous CuO/KIT-6 Catalyst
- A Novel Kinetics Study on H2O2 Decomposition inthe Propylene Epoxidation System in a Fixed-Bed Reactor
- Implementation of Homotopy Perturbation Method to Solve a Population Balance Model in Fluidized Bed
- Experimental Research on Utilization of Steel Rolling Sludge in Sintering Process
- Application of Honey-Bee Mating Optimization to Naphtha Reforming Reactor
- Modeling and Simulation of a Fischer–Tropsch Slurry Bubble Column Reactor Using Different Kinetic Rate Expressions for Iron and Cobalt Catalysts
- Solids Suspension Study in a Side-Entering Stirred Tank Through CFD Modeling
- Triphase Catalysis Using Silica Gel as Support
- Enhanced Trichloroethylene CatalyticOxidation on Modified Lanthanum Manganite ano-Perovskites
- A Novel Reactor for Microwave Hydrothermal Scale-up Nanopowder Synthesis
- Production of Amino and Organic Acids from Protein Using Sub-Critical Water Technology
- Purification of Crude Glycerine Obtained from Transesterification of Cottonseed Oil
- Predicting the Liquid Film Thickness and Droplet–Gas Flow in Effervescent Atomization: Influence of Operating Conditions and Fluid Viscosity
- Zinc-Modified MCM-22 as Potential Solid acid Catalyst for Friedel–Crafts Alkylation Reaction
- Dynamic Characteristics and Speed Control Strategy of Cellulose Hydrolysis Reactor at High Solids Loading
- Kinetic Study of Light Mercaptans in the Presence of Merox Catalyst and Caustic Soda
- Applications of Feed-Forward Neural Network to Study Irregular-Shape Particle Effects on Hydrodynamics Behavior in a Liquid–Solid Circulating Fluidized Bed Riser
- Experimental Investigation on the Translational and Rotational Motion of Biomass Particle in a Spout-Fluid Bed
- Industrial Methanol from Syngas: Kinetic Study and Process Simulation
- Study of Co-pyrolysis Characteristics of Lignite and Rice Husk in a TGA and a Fixed-Bed Reactor
- Exergy Analysis of Oxidative Steam Reforming of Methanol for Hydrogen Producton: Modeling Study
- Lead (II) Pollution Enhances the Binding of Transgenic Toxin in Brown and Red Soils: Equilibrium and Kinetics
- Influence of a Second Liquid Phase upon Carbon Dioxide Chemical Absorption
- Brackish Water Desalination by Electrodialysis: CaCO3 Scaling Monitoring During Batch Recirculation Operation
- The Effect of TiO2 Contained within a Titanium Silicalite (TS-1) Catalyst and on the Selective Oxidation of Ammonia
- Understanding Pt–Rh Synergy in a Three-Way Catalytic Converter
- Mathematical Modelling of Microwave Pyrolysis
- Photocatalytic Purification of Wastewater Polluted by Odorant Sulfur Compounds Using Titanium Oxide in a Continuous Photoreactor
- Adsorption Kinetics of Oxytetracycline onto Activated Carbon in a Closed-Loop Fixed Bed Reactor
- Catalytic Wet Peroxide Oxidation of Chlorophenol Over a Ce0.86Cu0.14–xO2 Catalyst
- Chemical Reaction Effect upon Gas–Liquid Interfacial Area in a Bubble Column Reactor
- Comparative Studies on Nitrophenol Removal byAdsorption and Simultaneous Adsorption-Biodegradation Processes
- Ultrasound-Assisted Enzymatic Synthesis of Poly-ε-Caprolactone: Kinetic Behavior and ReactorDesign