Article
Publicly Available
Frontmatter
Published/Copyright:
March 2, 2019
Published Online: 2019-03-02
Published in Print: 2019-03-26
©2019 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Editorials
- Editorial changes at Holzforschung
- Goodbye to Holzforschung
- Thanks to Oskar Faix
- Original Articles
- Orthotropic mechano-sorptive creep behavior of Chinese fir during the moisture adsorption process determined in tensile mode via dynamic mechanical analysis (DMA)
- Differences in the viscoelastic properties between earlywood and latewood in the growth rings of Chinese fir as analyzed by dynamic mechanical analysis (DMA) in the temperature range between −120°C and 120°C
- Failure conditions of solid wood on off-axis compression testing
- Effect of knots and holes on the modulus of elasticity prediction and mapping of sugi (Cryptomeria japonica) veneer using near-infrared hyperspectral imaging (NIR-HSI)
- Quantification of slip planes in the stem wood of Eucalyptus grandis
- DNA barcoding authentication for the wood of eight endangered Dalbergia timber species using machine learning approaches
- Chemical analysis and antioxidant activities of bark extracts from four endemic species of Hyrcanian forests in Iran
- Isolation of natural flavoring compounds from cooperage woods by pressurized hot water extraction (PHWE)
- Volatile organic compounds (VOCs) from lauan (Shorea ssp.) plyboard prepared with kraft lignin, soy flour, gluten meal and tannin: emissions during hot pressing and from panels as a function of time
- Plasma treatment of plastic film or decorative veneer and its effects on the peel strength and curling deformation of plastic film-reinforced pliable decorative sliced veneer (PR-RP-DSV)
Articles in the same Issue
- Frontmatter
- Editorials
- Editorial changes at Holzforschung
- Goodbye to Holzforschung
- Thanks to Oskar Faix
- Original Articles
- Orthotropic mechano-sorptive creep behavior of Chinese fir during the moisture adsorption process determined in tensile mode via dynamic mechanical analysis (DMA)
- Differences in the viscoelastic properties between earlywood and latewood in the growth rings of Chinese fir as analyzed by dynamic mechanical analysis (DMA) in the temperature range between −120°C and 120°C
- Failure conditions of solid wood on off-axis compression testing
- Effect of knots and holes on the modulus of elasticity prediction and mapping of sugi (Cryptomeria japonica) veneer using near-infrared hyperspectral imaging (NIR-HSI)
- Quantification of slip planes in the stem wood of Eucalyptus grandis
- DNA barcoding authentication for the wood of eight endangered Dalbergia timber species using machine learning approaches
- Chemical analysis and antioxidant activities of bark extracts from four endemic species of Hyrcanian forests in Iran
- Isolation of natural flavoring compounds from cooperage woods by pressurized hot water extraction (PHWE)
- Volatile organic compounds (VOCs) from lauan (Shorea ssp.) plyboard prepared with kraft lignin, soy flour, gluten meal and tannin: emissions during hot pressing and from panels as a function of time
- Plasma treatment of plastic film or decorative veneer and its effects on the peel strength and curling deformation of plastic film-reinforced pliable decorative sliced veneer (PR-RP-DSV)