Modeling of imaging fiber bundles and adapted signal processing for fringe projection
-
Steffen Matthias
Steffen Matthias is a research associate at the Institute of Measurement and Automatic Control at Leibniz Universität Hannover.
,
Markus Kästner
Markus Kästner is the head of the department for production metrology at the Institute of Measurement and Automatic Control at Leibniz Universität Hannover.
Eduard Reithmeier is the head of the Institute of Measurement and Automatic Control at Leibniz Universität Hannover.
Abstract
Fringe projection profilometry is an established technique for capturing three-dimensional (3-D)-geometry data with high-point densities in short time. By combining fringe projection with endoscopy techniques, it is possible to perform inline inspection of industrial manufacturing processes. A new fringe projection system is presented, which uses flexible image fiber bundles to achieve versatile positioning of a compact sensor head. When measuring specimens with highly varying reflectivity, such as technical surfaces on tool geometries, measurement errors increase especially due to the crosstalk between individual fibers in the bundle. A detailed analysis of the transmission properties of the utilized fiber bundles is presented. It is shown that aliasing is avoided due to the non-regular grid structure of a bundle. Different techniques are demonstrated to reduce the effect of crosstalk on the phase evaluation. Measurements of highly reflective technical surfaces with different geometrical properties are shown.
Funding source: Deutsche Forschungsgemeinschaft
Award Identifier / Grant number: SFB/TR 73
Funding statement: Funding: Deutsche Forschungsgemeinschaft, (Grant/Award Number: ‘SFB/TR 73’).
About the authors
Steffen Matthias is a research associate at the Institute of Measurement and Automatic Control at Leibniz Universität Hannover.
Markus Kästner is the head of the department for production metrology at the Institute of Measurement and Automatic Control at Leibniz Universität Hannover.
Eduard Reithmeier is the head of the Institute of Measurement and Automatic Control at Leibniz Universität Hannover.
Acknowledgment
The authors would like to thank the German Research Foundation (DFG) for funding the project B6 “Endoscopic geometry inspection” within the Collaborative Research Center (CRC)/TR 73. Thanks to Dominic Stangier from TU Dortmund for providing the coated specimens used for the measurements in this article.
References
[1] H. Schwenke, U. Neuschaefer-Rube, T. Pfeifer and H. Kunzmann, CIRP Ann. Manuf. Techn. 51, 685 (2002).10.1016/S0007-8506(07)61707-7Suche in Google Scholar
[2] E. Savio, L. de Chiffre and R. Schmitt, CIRP Ann. Manuf. Techn. 56, 810 (2007).10.1016/j.cirp.2007.10.008Suche in Google Scholar
[3] S. Matthias, A. Loderer, S. Koch, M. Gröne, M. Kästner, et al, Prod. Engineer. 10, 51 (2016).10.1007/s11740-015-0647-2Suche in Google Scholar
[4] J. Gamo, O. Demuynck, Ó. Esteban, J. L. Lázaro and A. Cubillo, Proc. IADAT (IADAT, Bilbao, Spain, 2005).Suche in Google Scholar
[5] C. Winter, S. Rupp, M. Elter, C. Munzenmayer, H. Gerhauser and T. Wittenberg, IEEE Trans. Biomed. Eng. 53, 2035 (2006).10.1109/TBME.2006.877110Suche in Google Scholar PubMed
[6] M. A. Z. Dippé and E. H. Wold, ACM Siggraph Computer Graphics 19, 69 (1985).10.1145/325165.325182Suche in Google Scholar
[7] R. Drougard, J. Opt. Soc. Am. 54, 907 (1964).10.1364/JOSA.54.000907Suche in Google Scholar
[8] X. Chen, K. L. Reichenbach and C. Xu, Opt. Express 16, 21598 (2008).10.1364/OE.16.021598Suche in Google Scholar PubMed
[9] K. L. Reichenbach and C. Xu, Opt. Express 15, 2151 (2007).10.1364/OE.15.002151Suche in Google Scholar
[10] O. Coquoz, Opt. Eng. 34, 2092 (1995).10.1117/12.204737Suche in Google Scholar
[11] S. K. Park, R. Schowengerdt and M.-A. Kaczynski, Appl. Opt. 23, 2572 (1984).10.1364/AO.23.002572Suche in Google Scholar
[12] J. H. McClellan, in ‘Proc. 7th Annu. Princeton Conf. Information Sciences and Systems’ (1973) pp. 247–251.Suche in Google Scholar
[13] S. Matthias, M. Kästner and E. Reithmeier, in ‘SPIE Photonics Europe, SPIE Proceedings’, Ed. By F. Berghmans and A. G. Mignani (SPIE, 2016) p. 989905.10.1117/12.2225601Suche in Google Scholar
[14] S. S. Gorthi and P. Rastogi, Opt. Lasers Eng. 48(IMAC-REVIEW-2009-001), 133–140 (2010).10.1016/j.optlaseng.2009.09.001Suche in Google Scholar
[15] W. H. Richardson, J. Opt. Soc. Am. 62, 55 (1972).10.1364/JOSA.62.000055Suche in Google Scholar
[16] S. Prasad, J. Opt. Soc. Am. A 19, 1286 (2002).10.1364/JOSAA.19.001286Suche in Google Scholar
[17] J.-H. Han, J. Lee and J. U. Kang, Opt. Express 18, 7427 (2010).10.1364/OE.18.007427Suche in Google Scholar PubMed PubMed Central
[18] S. Rupp, C. Winter and M. Elter, in ‘Annual International Conference of the IEEE Engineering in Medicine and Biology Society’, (2009) pp. 3677–3680.Suche in Google Scholar
[19] J. M. Huntley and H. Saldner, Appl. Opt. 32, 3047 (1993).10.1364/AO.32.003047Suche in Google Scholar PubMed
[20] H. P. Stahl, in ‘San Diego – DL Tentative, SPIE Proceedings’, Ed. By C. P. Grover (SPIE, 1990) p. 704.10.1117/12.51121Suche in Google Scholar
[21] W. Tillmann, D. Stangier and P. Schröder, Surf. Coat. Technol. (2016). DOI: 10.1016/j.surfcoat.2016.07.110 (in press).10.1016/j.surfcoat.2016.07.110Suche in Google Scholar
©2016 THOSS Media & De Gruyter
Artikel in diesem Heft
- Cover and Frontmatter
- Community
- Conference Notes
- Conference Calendar
- News from the European Optical Society EOS
- Topical Issue: Optical 3D Sensing
- Review Articles
- High-speed optical 3D sensing and its applications
- Infrared deflectometry for the inspection of diffusely specular surfaces
- Multi-scale referencing and coordinate unification of optical sensors in multi-axis machines
- Research Articles
- 3D shape measurement with thermal pattern projection
- A new form measurement system based on subaperture stitching with a line-scanning interferometer
- Evaluation of pixel-wise geometric constraint-based phase-unwrapping method for low signal-to-noise-ratio (SNR) phase
- Single-shot phase-measuring deflectometry for cornea measurement
- Modeling of imaging fiber bundles and adapted signal processing for fringe projection
- Noncontact three-dimensional quantitative profiling of fast aspheric lenses by optical coherence tomography
- Tutorial
- Aspherics in spectacle lenses
- Research Article
- Structural noise tolerance of photonic crystal optical properties
Artikel in diesem Heft
- Cover and Frontmatter
- Community
- Conference Notes
- Conference Calendar
- News from the European Optical Society EOS
- Topical Issue: Optical 3D Sensing
- Review Articles
- High-speed optical 3D sensing and its applications
- Infrared deflectometry for the inspection of diffusely specular surfaces
- Multi-scale referencing and coordinate unification of optical sensors in multi-axis machines
- Research Articles
- 3D shape measurement with thermal pattern projection
- A new form measurement system based on subaperture stitching with a line-scanning interferometer
- Evaluation of pixel-wise geometric constraint-based phase-unwrapping method for low signal-to-noise-ratio (SNR) phase
- Single-shot phase-measuring deflectometry for cornea measurement
- Modeling of imaging fiber bundles and adapted signal processing for fringe projection
- Noncontact three-dimensional quantitative profiling of fast aspheric lenses by optical coherence tomography
- Tutorial
- Aspherics in spectacle lenses
- Research Article
- Structural noise tolerance of photonic crystal optical properties
