Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
Dynamic behaviour of cork and cork-filled aluminium tubes: Numerical simulation and innovative applications
-
Celina Pires Gameiro
Veröffentlicht/Copyright:
12. Juni 2007
Abstract
Cork is a unique and complex natural cellular material with many industrial applications. The purpose of this paper is to explore a new application field for the use of micro-agglomerate cork as an energy-absorbing medium. A numerical study on the energy absorption capabilities of square and circular cork-filled aluminium tubes with a width or diameter of 80 mm, length of 300 mm and variable thickness was performed with the finite element method code LS-DYNA™. The tubes were impacted uniaxially at 10 and 15 m s-1. The same analysis was carried out on aluminium foam-filled tubes. The results demonstrate that cork filling leads to a considerable increase in the energy absorbed for both section geometries, and that tube thickness plays an important role in the deformation modes and energy absorption. The investigation revealed better results for aluminium foam-filled structures, but demonstrated that micro-agglomerate cork has high potential as an energy-absorbing medium in crash protection applications.
Keywords: agglomerate cork; aluminium foam; dynamic behaviour; energy absorption; finite element method
Received: 2006-7-14
Accepted: 2007-2-7
Published Online: 2007-06-12
Published in Print: 2007-6-1
©2007 by Walter de Gruyter Berlin New York
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- Meetings
- Micromechanical modeling of solid-type and plate-type deformation patterns within softwood materials. A review and an improved approach
- Failure mechanisms in wood-based materials: A review of discrete, continuum, and hybrid finite-element representations
- Morphological lattice models for the simulation of softwood failure and fracture
- Experimental and numerical investigation of wood fracture mechanisms at different humidity levels
- Material point method simulations of transverse fracture in wood with realistic morphologies
- Simulation of cracks in wood using a coupled material model for interface elements
- Preliminary tests to evaluate the mechanical properties of young trees with small diameter
- Characterization and strength modeling of parallel-strand lumber
- Dynamic behaviour of cork and cork-filled aluminium tubes: Numerical simulation and innovative applications
- A numerical study of the transverse modulus of wood as a function of grain orientation and properties
- Effects of ring characteristics on the compressive strength and dynamic modulus of elasticity of seven softwood species
- Experimental device for the accurate determination of wood-water relations on micro-samples
- Evaluating the suitability of hybrid poplar clones for the manufacture of oriented strand boards
- Finely milled kenaf core as a natural plywood binder
- Alkaline peroxide treatment of ECF bleached softwood kraft pulps. Part 1. Characterizing the effect of alkaline peroxide treatment on carboxyl groups of fibers
- Alkaline peroxide treatment of ECF bleached softwood kraft pulps: Part 2. Effect of increased fiber charge on refining, wet-end application, and hornification
- Molar mass determination of lignins by size-exclusion chromatography: towards standardisation of the method
Schlagwörter für diesen Artikel
agglomerate cork;
aluminium foam;
dynamic behaviour;
energy absorption;
finite element method
Artikel in diesem Heft
- Meetings
- Micromechanical modeling of solid-type and plate-type deformation patterns within softwood materials. A review and an improved approach
- Failure mechanisms in wood-based materials: A review of discrete, continuum, and hybrid finite-element representations
- Morphological lattice models for the simulation of softwood failure and fracture
- Experimental and numerical investigation of wood fracture mechanisms at different humidity levels
- Material point method simulations of transverse fracture in wood with realistic morphologies
- Simulation of cracks in wood using a coupled material model for interface elements
- Preliminary tests to evaluate the mechanical properties of young trees with small diameter
- Characterization and strength modeling of parallel-strand lumber
- Dynamic behaviour of cork and cork-filled aluminium tubes: Numerical simulation and innovative applications
- A numerical study of the transverse modulus of wood as a function of grain orientation and properties
- Effects of ring characteristics on the compressive strength and dynamic modulus of elasticity of seven softwood species
- Experimental device for the accurate determination of wood-water relations on micro-samples
- Evaluating the suitability of hybrid poplar clones for the manufacture of oriented strand boards
- Finely milled kenaf core as a natural plywood binder
- Alkaline peroxide treatment of ECF bleached softwood kraft pulps. Part 1. Characterizing the effect of alkaline peroxide treatment on carboxyl groups of fibers
- Alkaline peroxide treatment of ECF bleached softwood kraft pulps: Part 2. Effect of increased fiber charge on refining, wet-end application, and hornification
- Molar mass determination of lignins by size-exclusion chromatography: towards standardisation of the method
