Surface Roughness and Color Change of Copper-Amine Treated Red Maple (Acer rubrum) Exposed to Artificial Ultraviolet Light
-
D. P. Kamdem
Summary
UV absorbers were microwave-grafted onto copper-amine (Cu-MEA) treated maple. The so-treated wood was weathered with UV light for various periods of time. Two weathering cycles were used: one with only an irradiation step using a 175W medium pressure mercury lamp of wavelength higher than 300 nm and a second with irradiation and a water spray step. The surface color and the surface roughness were monitored and the biological performance of the UV absorbers grafted on copper amine-treated maple evaluated as well. ∆E, the total color change was measured and it increased from 0 to 14.7 after 317 h weathering for untreated maple. For Cu-MEA treated and UV absorbers grafted on the surface, the values of ∆E range from 0.7 to 5.7. The higher values of ∆E for both treated and untreated samples were associated with the weathering cycle with the water spray step, suggesting that water plays an important role in the wood discoloration. However, the microwave grafting of UV absorber on Cu-MEA treated maple did not prevent or reduce the formation of rough surface or inhibit the biological performance of Cu-MEA. This laboratory study indicates that phenolic UV absorbers can be microwave grafted on maple to improve the color stability.
Copyright © 2002 by Walter de Gruyter GmbH & Co. KG
Articles in the same Issue
- Effect of Growth Rate on Fibre Characteristics in Norway Spruce (Picea abies (L.) Karst.)
- Techniques for Measuring Growth Stress on the Xylem Surface Using Strain and Dial Gauges
- Use of Soft Rot Cavities to Determine Microfibril Angles in Wood; Advantages, Disadvantages and Possibilities
- Surface Roughness and Color Change of Copper-Amine Treated Red Maple (Acer rubrum) Exposed to Artificial Ultraviolet Light
- Differences in Resin Acid Concentration between Brown-Rot Resistant and Susceptible Scots Pine Heartwood
- Antioxidant Activity of Abietane-Type Diterpenes from Heartwood of Taiwania cryptomerioides Hayata
- Hydrothermolysis of Flavonoids in Relation to Steaming of Japanese Larch Wood
- Impact of Pulping Conditions on FORMACELL Aspen Lignin: Investigation of Methoxyl and Ester Groups, Carbohydrates, Molar Mass and Glass Transition Temperatures
- Ethanol-Enhanced Alkaline Pulping of Arundo donax L. Reed: Influence of Solvent on Pulp Yield and Quality
- Reflectance FTIR Microspectroscopy for Studying Effect of Xylan Removal on Unbleached and Bleached Birch Kraft Pulps
- Structure of Thermally Modified Wood Studied by Liquid State NMR Measurements
- Detection on Incipient Fungal Attack in Wood Using Magnetic Resonance Parameter Mapping Wood Studied by Liquid State NMR Measurements
- Wood Density Determination by X- and Gamma-Ray Tomography
- The Influence of Wood Specimen Surface Coating on Moisture Movement during Drying
- Study of the System Wood – Coating Material. Part 2.Wood – Solid Coating Material
- Flake Drying Temperature Affects Mat Properties during Pressing
Articles in the same Issue
- Effect of Growth Rate on Fibre Characteristics in Norway Spruce (Picea abies (L.) Karst.)
- Techniques for Measuring Growth Stress on the Xylem Surface Using Strain and Dial Gauges
- Use of Soft Rot Cavities to Determine Microfibril Angles in Wood; Advantages, Disadvantages and Possibilities
- Surface Roughness and Color Change of Copper-Amine Treated Red Maple (Acer rubrum) Exposed to Artificial Ultraviolet Light
- Differences in Resin Acid Concentration between Brown-Rot Resistant and Susceptible Scots Pine Heartwood
- Antioxidant Activity of Abietane-Type Diterpenes from Heartwood of Taiwania cryptomerioides Hayata
- Hydrothermolysis of Flavonoids in Relation to Steaming of Japanese Larch Wood
- Impact of Pulping Conditions on FORMACELL Aspen Lignin: Investigation of Methoxyl and Ester Groups, Carbohydrates, Molar Mass and Glass Transition Temperatures
- Ethanol-Enhanced Alkaline Pulping of Arundo donax L. Reed: Influence of Solvent on Pulp Yield and Quality
- Reflectance FTIR Microspectroscopy for Studying Effect of Xylan Removal on Unbleached and Bleached Birch Kraft Pulps
- Structure of Thermally Modified Wood Studied by Liquid State NMR Measurements
- Detection on Incipient Fungal Attack in Wood Using Magnetic Resonance Parameter Mapping Wood Studied by Liquid State NMR Measurements
- Wood Density Determination by X- and Gamma-Ray Tomography
- The Influence of Wood Specimen Surface Coating on Moisture Movement during Drying
- Study of the System Wood – Coating Material. Part 2.Wood – Solid Coating Material
- Flake Drying Temperature Affects Mat Properties during Pressing
