Article
Licensed
Unlicensed
Requires Authentication
Use of Soft Rot Cavities to Determine Microfibril Angles in Wood; Advantages, Disadvantages and Possibilities
-
J. Brändström
Published/Copyright:
June 1, 2005
Published Online: 2005-06-01
Published in Print: 2002-08-26
Copyright © 2002 by Walter de Gruyter GmbH & Co. KG
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Effect of Growth Rate on Fibre Characteristics in Norway Spruce (Picea abies (L.) Karst.)
- Techniques for Measuring Growth Stress on the Xylem Surface Using Strain and Dial Gauges
- Use of Soft Rot Cavities to Determine Microfibril Angles in Wood; Advantages, Disadvantages and Possibilities
- Surface Roughness and Color Change of Copper-Amine Treated Red Maple (Acer rubrum) Exposed to Artificial Ultraviolet Light
- Differences in Resin Acid Concentration between Brown-Rot Resistant and Susceptible Scots Pine Heartwood
- Antioxidant Activity of Abietane-Type Diterpenes from Heartwood of Taiwania cryptomerioides Hayata
- Hydrothermolysis of Flavonoids in Relation to Steaming of Japanese Larch Wood
- Impact of Pulping Conditions on FORMACELL Aspen Lignin: Investigation of Methoxyl and Ester Groups, Carbohydrates, Molar Mass and Glass Transition Temperatures
- Ethanol-Enhanced Alkaline Pulping of Arundo donax L. Reed: Influence of Solvent on Pulp Yield and Quality
- Reflectance FTIR Microspectroscopy for Studying Effect of Xylan Removal on Unbleached and Bleached Birch Kraft Pulps
- Structure of Thermally Modified Wood Studied by Liquid State NMR Measurements
- Detection on Incipient Fungal Attack in Wood Using Magnetic Resonance Parameter Mapping Wood Studied by Liquid State NMR Measurements
- Wood Density Determination by X- and Gamma-Ray Tomography
- The Influence of Wood Specimen Surface Coating on Moisture Movement during Drying
- Study of the System Wood – Coating Material. Part 2.Wood – Solid Coating Material
- Flake Drying Temperature Affects Mat Properties during Pressing
Articles in the same Issue
- Effect of Growth Rate on Fibre Characteristics in Norway Spruce (Picea abies (L.) Karst.)
- Techniques for Measuring Growth Stress on the Xylem Surface Using Strain and Dial Gauges
- Use of Soft Rot Cavities to Determine Microfibril Angles in Wood; Advantages, Disadvantages and Possibilities
- Surface Roughness and Color Change of Copper-Amine Treated Red Maple (Acer rubrum) Exposed to Artificial Ultraviolet Light
- Differences in Resin Acid Concentration between Brown-Rot Resistant and Susceptible Scots Pine Heartwood
- Antioxidant Activity of Abietane-Type Diterpenes from Heartwood of Taiwania cryptomerioides Hayata
- Hydrothermolysis of Flavonoids in Relation to Steaming of Japanese Larch Wood
- Impact of Pulping Conditions on FORMACELL Aspen Lignin: Investigation of Methoxyl and Ester Groups, Carbohydrates, Molar Mass and Glass Transition Temperatures
- Ethanol-Enhanced Alkaline Pulping of Arundo donax L. Reed: Influence of Solvent on Pulp Yield and Quality
- Reflectance FTIR Microspectroscopy for Studying Effect of Xylan Removal on Unbleached and Bleached Birch Kraft Pulps
- Structure of Thermally Modified Wood Studied by Liquid State NMR Measurements
- Detection on Incipient Fungal Attack in Wood Using Magnetic Resonance Parameter Mapping Wood Studied by Liquid State NMR Measurements
- Wood Density Determination by X- and Gamma-Ray Tomography
- The Influence of Wood Specimen Surface Coating on Moisture Movement during Drying
- Study of the System Wood – Coating Material. Part 2.Wood – Solid Coating Material
- Flake Drying Temperature Affects Mat Properties during Pressing
