Time dependent synthesis of crystalline Bi2S3 and its application as a sensitizer in SnO2 based solar cells
-
Anil N. Kulkarni
Abstract
In the present study, thin films of Bi2S3 with hollow morphology were deposited by chemical bath deposition at room temperature. The structural, morphological and optical properties of Bi2S3 films were investigated as a function of deposition time. To study the photovoltaic properties, sensitization of SnO2 photoanode with Bi2S3 was achieved successfully via chemical bath deposition. The solar cell fabricated using SnO2–Bi2S3 photoanode showed an open circuit voltage (VOC) of 357 mV, short circuit current density of (JSC) 740.16 μA cm−2 and fill factor (F.F.) of 31%.
References
[1] P.Yang: Nature425 (2003) 244. 10.1038/425243aSearch in Google Scholar
[2] S.Panda, S.Chaudhari: J. Colloid Interface Sci.313 (2007) 344. 10.1016/j.jcis.2007.04.032Search in Google Scholar
[3] X.W.D.Lou, L.A.Archer, Z.Yang: Adv. Mater.20 (2008) 4019. 10.1002/adma.200702379Search in Google Scholar
[4] C.D.Lokhande, B.R.Sankpal, R.S.Mane, H.M.Pathan, M.Muller, M.Giersig, H.Tributsch, V.Ganeshan: Appl. Surf. Sci.187 (2002) 108. 10.1016/S0169-4332(01)00813-3Search in Google Scholar
[5] R.S.Mane, B.Sankpal, C.D.Lokhande: Thin Solid Films359 (2000) 136. 10.1016/S0040-6090(99)00532-5Search in Google Scholar
[6] R.Suarez, P.K.Nair, P.V.Kamat: Langmuir14 (1998) 3241. 10.1021/la9801662Search in Google Scholar
[7] E.J.Mittemeijer, U.Welzel: Z. Kristallogr.223 (2008) 552–560. 10.1524/zkri.2008.1213Search in Google Scholar
[8] C.Suryanarayana, M.GrantNorton: X-ray Diffraction – A Practical Approach, Plenum Press, NewYork and London (1988).Search in Google Scholar
[9] X.B.Cao, L.Gu, L.J.Zhuge, W.H.Qian, C.Zhao, X.M.Lan, W.J.Sheng, D.Yao: Colloids Surf., A297 (2007) 183. 10.1016/j.colsurfa.2006.10.042Search in Google Scholar
[10] H.F.Bao, X.Q.Cui, C.M.Li, Y.Gan, J.Zhang, J.Guo: J. Phys. Chem. C111 (2007) 12279. 10.1021/jp066871ySearch in Google Scholar
[11] J.H.Rhee, C.-C.Chung, E.W.-G.Diau: NPG Asia Materials5 (2013) e68. 10.1038/am.2013.53Search in Google Scholar
© 2015, Carl Hanser Verlag, München
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- Phase equilibria studies of the “MnO”–Al2O3–SiO2 system in equilibrium with metallic alloy. Part 2: phase equilibria
- X-ray stress measurement from an imperfect Debye–Scherrer ring
- Effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy
- Quantification of roping in aluminium sheet alloys for car body applications by combining 3D surface measurements with Fourier analysis
- Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
- Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
- Corrosion performance and microstructural response of A380 matrix alloy reinforced with sol–gel TiO2-coated SiC particles: a perspective on previous studies
- Role of chloride in the electrochemical behaviour of AZ31B Mg alloy
- Implications of solute super-saturation in growth of vaporisation-induced recrystallised grains during heat treatment in Ni-base superalloys
- Rapid synthesis of Mn3O4 powder from pyro-synthesis of ethylene glycol–metal nitrate precursor assisted by nitric acid
- Production of bioactive glass-derived scaffolds using citric acid porogen
- Short Communications
- Microstructure and mechanical properties of deformed Mg–Mn–Sn alloys
- Fast microwave synthesis and characterization of MgTi2O5
- Time dependent synthesis of crystalline Bi2S3 and its application as a sensitizer in SnO2 based solar cells
- Synthesis of cobalt-doped CdS (CdS:Co) by a simple and rapid microwave activated method and investigating optical properties
- People
- In Memoriam Volker Schumacher
- DGM News
- DGM News
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- Phase equilibria studies of the “MnO”–Al2O3–SiO2 system in equilibrium with metallic alloy. Part 2: phase equilibria
- X-ray stress measurement from an imperfect Debye–Scherrer ring
- Effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy
- Quantification of roping in aluminium sheet alloys for car body applications by combining 3D surface measurements with Fourier analysis
- Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
- Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
- Corrosion performance and microstructural response of A380 matrix alloy reinforced with sol–gel TiO2-coated SiC particles: a perspective on previous studies
- Role of chloride in the electrochemical behaviour of AZ31B Mg alloy
- Implications of solute super-saturation in growth of vaporisation-induced recrystallised grains during heat treatment in Ni-base superalloys
- Rapid synthesis of Mn3O4 powder from pyro-synthesis of ethylene glycol–metal nitrate precursor assisted by nitric acid
- Production of bioactive glass-derived scaffolds using citric acid porogen
- Short Communications
- Microstructure and mechanical properties of deformed Mg–Mn–Sn alloys
- Fast microwave synthesis and characterization of MgTi2O5
- Time dependent synthesis of crystalline Bi2S3 and its application as a sensitizer in SnO2 based solar cells
- Synthesis of cobalt-doped CdS (CdS:Co) by a simple and rapid microwave activated method and investigating optical properties
- People
- In Memoriam Volker Schumacher
- DGM News
- DGM News