Home Microstructural characterisation of oxide layer developed by sulphuric anodisation on 2017A alloys
Article
Licensed
Unlicensed Requires Authentication

Microstructural characterisation of oxide layer developed by sulphuric anodisation on 2017A alloys

  • Chahinez Fares , Achraf Boudiaf , Mohamed El Amine Belouchrani and Taoufik Boukharouba
Published/Copyright: November 5, 2013
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 104 Issue 11

Abstract

In this paper, the characteristics of the oxide film formed on the surface of 2017A aluminium alloy by sulphuric oxidation are investigated. Morphological features on the oxide film are studied using scanning electron microscopy. Crystallographic details are obtained using X-ray diffraction. The composition of the oxide layer is estimated using wavelength dispersive X-ray spectrometry and Raman spectroscopy. Through systematic structure–property studies, the microstructure of the oxide layer is identified providing the incorporation of the alloying elements in the inner layer with a copper enrichment at the interface.

Keywords: Aluminium alloys; Anodisation; Characterisation; Oxide layer
* Correspondence address, Dr. Achraf Boudiaf, Laboratoire Génie des Matériaux, Ecole Militaire Polytechnique, BP 17, BordjEl-Bahri, 16111 Algeria, Tel.: +21321863469, Fax: +21321863204, E-mail:

References

[1] X.Wu, K.Hebert: J. Electrochem. Soc.143 (1996) 83–91. 10.1149/1.1836390.Search in Google Scholar

[2] H.Habazaki, K.Shimizu, M.A.Paez, P.Skeldon, G.E.Thompson, G.C.Wood, X.Xhou: Surf. Interface Anal.23 (1995) 892–898. 10.1002/sia.740231307.Search in Google Scholar

[3] H.Habazaki, M.Paez, K.Shimizu, P.Skeldon, G.Thompson, G.Wood, X.Zhou: Corros. Sci.38 (1996) 1033–1042. 10.1016/0010-938X(96)00184-9.Search in Google Scholar

[4] H.H.Strehblow, C.M.Melliar-Smith, W.M.Augustyniak: J. Electrochem. Soc.125 (1978) 915–919. 10.1149/1.2131590.Search in Google Scholar

[5] H.Habazaki, K.Shimizu, P.Skeldon, G.Thompson, G.Wood, X.Zhou: Trans. Inst. Met. Finish.75 (1997) 18–23.10.1080/00202967.1997.11871137Search in Google Scholar

[6] M.Páez, T.Foong, C.Ni, G.Thompson, K.Shimizu, H.Habazaki, P.Skeldon, G.Wood: Corros. Sci.38 (1996) 59–72. 10.1016/0010-938X(96)00102-3.Search in Google Scholar

[7] Y.Liu, E.Sultan, E.Koroleva, P.Skeldon, G.Thompson, X.Zhou, K.Shimizu, H.Habazaki: Corros. Sci.45 (2003) 789–797. 10.1016/S0010-938X(02)00126-9.Search in Google Scholar

[8] X.Zhou, G.Thompson, P.Skeldon: Electrochim. Acta53 (2008) 5684–5691. 10.1016/j.electacta.2008.03.034.Search in Google Scholar

[9] Y.Liu, F.Colin, P.Skeldon, G.Thompson, X.Zhou, H.Habazaki, K.Shimizu: Corros. Sci.45 (2003) 1539–1544. 10.1016/S0010-938X(02)00249-4.Search in Google Scholar

[10] X.Zhou, G.Thompson, P.Skeldon, K.Shimizu, H.Habazaki, G.Wood: Corros. Sci.47 (2005) 1299–1306. 10.1016/j.corsci.2004.07.026.Search in Google Scholar

[11] S.Garcia-Vergara, P.Skeldon, G.Thompson, P.Bailey, T.Noakes, H.Habazaki, K.Shimizu: Appl. Surf. Sci.205 (2003) 121–127. 10.1016/S0169-4332(02)01040-1.Search in Google Scholar

[12] S.Garcia-Vergara, K.E.Khazmi, P.Skeldon, G.Thompson: Corros. Sci.48 (2006) 2937–2946. 10.1016/j.corsci.2005.10.017Search in Google Scholar

[13] Y.Liu, M.Arenas, S.Garcia-Vergara, T.Hashimoto, P.Skeldon, G.Thompson, H.Habazaki, P.Bailey, T.Noakes: Corros. Sci.50 (2008) 1475–1480. 10.1016/j.corsci.2008.01.021.Search in Google Scholar

[14] H.Habazaki, X.Zhou, K.Shimizu, P.Skeldon, G.Thompson, G.Wood: Electrochim. Acta42 (1997) 2627–2635. 10.1016/S0013-4686(96)00454-9.Search in Google Scholar

[15] H.Habazaki, H.Konno, K.Shimizu, S.Nagata, P.Skeldon, G.Thompson: Corros. Sci.46 (2004) 2041–2053. 10.1016/j.corsci.2003.10.027.Search in Google Scholar

[16] C.Fares, M.A.Belouchrani, S.Bellayer, T.Boukharouba, A.Britah: J. Tribol. Surf. Eng.2 (2011) 121–132.Search in Google Scholar

[17] P.Thomas, V.Ramakrishnan, V.Vaidyan: Thin Solid Films170 (1989) 35–40. 10.1016/0040-6090(89)90619-6.Search in Google Scholar

[18] S.Ram: Infrared Phys. Technol.42 (2001) 547–560. 10.1016/S1350-4495(01)00117-7.Search in Google Scholar

[19] L.I.McCann, K.Trentelman, T.Possley, B.Golding: J. Raman Spectrosc.30 (1999) 121–132. 10.1002/(SICI)1097-4555(199902)30:2<121::AID-JRS355>3.0.CO;2-L.Search in Google Scholar

Received: 2013-01-08
Accepted: 2013-06-03
Published Online: 2013-11-05
Published in Print: 2013-11-14

© 2013, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Solubility of nitrogen in ferrite; the Fe–N phase diagram
  5. The Li–C phase equilibria
  6. Experimental study of phase equilibria in the “SnO”–SiO2–“FeO” system at silica saturation, and fixed oxygen partial pressures at 1473 K
  7. The evolution of Y distribution during the processing route of mechanically alloyed iron studied by means of atom probe tomography
  8. Oscillative surface morphology in peritectic NiAl using phase-field modeling
  9. Microstructural characterisation of oxide layer developed by sulphuric anodisation on 2017A alloys
  10. Wear and corrosion behaviour of AISI 310 and AISI 316 stainless steels in synthetic mine water
  11. Superplasticity of coarse-grained Ti-13V-11Cr-3Al alloy
  12. Research on the creep fracture mechanism of FGH95 Ni-based superalloy
  13. Hot pressing of Al2O3 matrix ceramic materials improved by diopside additive
  14. Tungsten heavy alloy as a filler metal for repair welding of dies for high pressure die casting
  15. A one-pot synthesis of Ag/α-Fe2O3 nanoplates with gelatin and their photocatalytic activity
  16. Short Communications
  17. Effects of coating solution concentration on the interlaminar shear strength of carbon fiber/epoxy/nano-CaCO3 composites
  18. People
  19. Dr.-Ing. Christa Blank
  20. DGM News
  21. DGM News
https://doi.org/10.3139/146.110962
Keywords for this article
Aluminium alloys; Anodisation; Characterisation; Oxide layer

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Solubility of nitrogen in ferrite; the Fe–N phase diagram
  5. The Li–C phase equilibria
  6. Experimental study of phase equilibria in the “SnO”–SiO2–“FeO” system at silica saturation, and fixed oxygen partial pressures at 1473 K
  7. The evolution of Y distribution during the processing route of mechanically alloyed iron studied by means of atom probe tomography
  8. Oscillative surface morphology in peritectic NiAl using phase-field modeling
  9. Microstructural characterisation of oxide layer developed by sulphuric anodisation on 2017A alloys
  10. Wear and corrosion behaviour of AISI 310 and AISI 316 stainless steels in synthetic mine water
  11. Superplasticity of coarse-grained Ti-13V-11Cr-3Al alloy
  12. Research on the creep fracture mechanism of FGH95 Ni-based superalloy
  13. Hot pressing of Al2O3 matrix ceramic materials improved by diopside additive
  14. Tungsten heavy alloy as a filler metal for repair welding of dies for high pressure die casting
  15. A one-pot synthesis of Ag/α-Fe2O3 nanoplates with gelatin and their photocatalytic activity
  16. Short Communications
  17. Effects of coating solution concentration on the interlaminar shear strength of carbon fiber/epoxy/nano-CaCO3 composites
  18. People
  19. Dr.-Ing. Christa Blank
  20. DGM News
  21. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 31.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.110962/html
Scroll to top button