Two Component Injection Molding of Phase Separating Blends
-
B. J. Keestra
Abstract
A partially miscible polymer PMMA/SAN blend is used in two component injection molding to produce a sandwich structure with a heterogeneous skin layer. Two different strategies are explored to obtain the desired structure either via sequential injection molding or via the use of the fountain flow. Both cases are studied with scanning electron microscopy to visualize the structure in the skin layer. In addition, numerical modelling examples are presented to improve understanding of the morphologies that have been created with injection molding.
References
1Anderson, D. M., McFadden, G. B., Wheele, A. A.: Annu. Rev. Fluid Mech. 30, p. 139 (1998)10.1146/annurev.fluid.30.1.139Suche in Google Scholar
2Bogaerds, A. C. B.: PhD Thesis, Eindhoven University of Technology, Eindhoven, The Netherlands (2002)Suche in Google Scholar
3Cahn, J. W., Hilliard, J. E.: J. Chem. Phys. 28 (2), p. 258 (1958)10.1063/1.1744102Suche in Google Scholar
4Chen, S. C., Chen, N. T., Hsu, K. S., Hsu, K. F.: AIChE journal42 (6), p. 706 (1996)10.1002/aic.690420622Suche in Google Scholar
5de Graaf, M. A.: PhD Thesis, Eindhoven University of Technology, Einhoven, The Netherlands (2002)Suche in Google Scholar
6Janeschitz-Kriegl, H.: Rheol. Acta18, p. 693 (1979)10.1007/BF01533343Suche in Google Scholar
7Keestra, B. J., van Puyvelde, P. C. J., Anderson, P. D., Meijer, H. E. H.: Phys. Fluids15 (9), p. 2567 (2003)10.1063/1.1597454Suche in Google Scholar
8Naumann, E. B., He, D. Q.: Chem. Eng. Sci. 56, p. 1999 (2001)10.1016/S0009-2509(01)00005-7Suche in Google Scholar
9Snijder, A.: PhD Thesis, Eindhoven University of Technology, Eindhoven, The Netherlands (2002)Suche in Google Scholar
10Turng, L. S., Kharbas, H.: Int. Polym. Process. 19, p. 77 (2004)10.3139/217.1806Suche in Google Scholar
11van Duijnhoven, F. G. H.: PhD Thesis, Eindhoven University of Technology, Eindhoven, The Netherlands (1999)Suche in Google Scholar
12Venderbosch, R. W., Meijer, H. E. H., Lemstra, P. J.: Polymer35 (20), p. 4349 (1994)10.1016/0032-3861(94)90092-2Suche in Google Scholar
13Venderbosch, R. W., Meijer, H. E. H., Lemstra, P. J.: Polymer36 (15), p. 2903 (1995)10.1016/0032-3861(95)94339-USuche in Google Scholar
14Watanabe, D., Ishiaku, U. S., Nagaoka, T., Tomari, K., Hamada, H.: Int. Polym. Process. 18, p. 405 (2003)10.3139/217.1787Suche in Google Scholar
15Zoetelief, W. F., Peters, G. W. M., Meijer, H. E. H.: Int. Polym. Process. 12 p. 216 (1997)10.3139/217.970216Suche in Google Scholar
© 2006, Hanser Publishers, Munich
Artikel in diesem Heft
- Contents
- Contents
- Regular Contributed Articles
- Pressure and Temperature Dependence of LDPE Viscosity and Free Volume: The Effect of Molecular Structure
- Correlations between Injection Molding Parameters, Morphology and Mechanical Properties of PPS Using Artificial Neural Networks
- Investigations into Kinematic Reversal in Non-isothermal Flows in Single-screw Machines
- The Effect of Post-extrusion Conditions in Ribbon Extrusion of Polymer Blends
- Effect of the Chemical and Morphological Conditions of the Die Wall on the Extrusion of Linear Polyolefins
- Investigation of the Heat Affected Zone of Hot-gas Welded PP Joints
- Method for the Optimisation of Screw Elements for Tightly Intermeshing, Co-rotating Twin Screw Extruders
- Rheology and Processing of Molten Poly(methyl methacrylate) Resins
- PLLA Morphology Controlled by Dry-cast Process
- Two Component Injection Molding of Phase Separating Blends
- A Low Force Valve for Dynamic Control of Molten Plastics in a Mold
- Influence of Drawing and Temperature on the Optical and Structural Properties of Monofilament PP Sutures
- Mechanical Properties of Rubber-toughened Post-industrial Glass-fiber-reinforced PA66
- Thermal Flow Instability in Metal Injection Molding: Experiment and Simulation
- Review Paper
- State of the Art: Recycling of EPDM Rubber Vulcanizates
- PPS News
- PPS News
- Seikei-Kakou Abstracts
- Seikei-Kakou Abstracts
Artikel in diesem Heft
- Contents
- Contents
- Regular Contributed Articles
- Pressure and Temperature Dependence of LDPE Viscosity and Free Volume: The Effect of Molecular Structure
- Correlations between Injection Molding Parameters, Morphology and Mechanical Properties of PPS Using Artificial Neural Networks
- Investigations into Kinematic Reversal in Non-isothermal Flows in Single-screw Machines
- The Effect of Post-extrusion Conditions in Ribbon Extrusion of Polymer Blends
- Effect of the Chemical and Morphological Conditions of the Die Wall on the Extrusion of Linear Polyolefins
- Investigation of the Heat Affected Zone of Hot-gas Welded PP Joints
- Method for the Optimisation of Screw Elements for Tightly Intermeshing, Co-rotating Twin Screw Extruders
- Rheology and Processing of Molten Poly(methyl methacrylate) Resins
- PLLA Morphology Controlled by Dry-cast Process
- Two Component Injection Molding of Phase Separating Blends
- A Low Force Valve for Dynamic Control of Molten Plastics in a Mold
- Influence of Drawing and Temperature on the Optical and Structural Properties of Monofilament PP Sutures
- Mechanical Properties of Rubber-toughened Post-industrial Glass-fiber-reinforced PA66
- Thermal Flow Instability in Metal Injection Molding: Experiment and Simulation
- Review Paper
- State of the Art: Recycling of EPDM Rubber Vulcanizates
- PPS News
- PPS News
- Seikei-Kakou Abstracts
- Seikei-Kakou Abstracts
