Startseite Influence of Drawing and Temperature on the Optical and Structural Properties of Monofilament PP Sutures
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Influence of Drawing and Temperature on the Optical and Structural Properties of Monofilament PP Sutures

  • E. A. Seisa
Veröffentlicht/Copyright: 6. April 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 21 Heft 2

Abstract

The influence of drawing and temperature on the optical and structural properties of monofilament polypropylene sutures (PP) were investigated using interferometry. Two techniques have been used in this study: 1) the polarizing interference microscope, 2) multiple-beam Fizeau interferometry. The polarizing interference microscope is used to study the variation of refractive indices and birefringence of PP sutures at different draw ratios and stresses. The stress-strain diagram of PP sutures was studied. The resulting data was used to calculate the average work per chain, Poisson's ratio, strain optical coefficient, Young's modulus and optical orientation function. Multiple-beam Fizeau interferometry was used to study the temperature effect on optical properties of PP sutures with temperature ranging from 19 to 40°C. Relationships between the optical parameters at different temperatures are given. Calculation of the density, crystallinity, dielectric constant and dielectric susceptibility at different temperatures are done. The results obtained, clarify the effect of drawing and temperature on the structure of PP sutures. Microinterferograms are given for illustration.

∗ Mail address: E. A. Seisa, Physics Department, Faculty of Science, Mansoura University, Mansoura, Egypt. E-mail:

References

1Deng, M., Zhou, J., Ghen, G., Burkley, D., Jamiolkowski, Y., Xu, D., Barbolt, T.: Biomaterials26, p. 4327 (2005)10.1016/j.biomaterials.2004.09.067Suche in Google Scholar

2Wada, A., Kubota, H., Hatanaka, H., Miura, H., Iwamoto, Y.: J. Hand Surgery B26 p. 212 (2001)10.1054/jhsb.2000.0508Suche in Google Scholar

3Karaca Bayraktar, E., Sengönül Hockenberger, A.: Textile Res. J71 (5), p. 435 (2001)10.1177/004051750107100511Suche in Google Scholar

4Heward, A. G., Laing, R. M., Carr, D. J., Niven, B. E.: Textile Res. J. 74 (1), p. 83 (2004)10.1177/004051750407400115Suche in Google Scholar

5Peter, R. H.: Textile Chemistry, Elsevier, London (1963)Suche in Google Scholar

6De Vries, H.: J. Polym. Sci34, p. 761 (1959)10.1002/pol.1959.1203412750Suche in Google Scholar

7Ward, I. M.: Structure and Properties of Oriented Polymers, Applied Science, London (1975)10.1007/978-94-010-9803-8Suche in Google Scholar

8Barakat, N., Hamza, A. A.: Interferometry of Fibrous Materials, Bristol: Adam Hilger (1990)Suche in Google Scholar

9Barakat, N.: Text Res, J. 41, p. 167 (1971)10.1177/004051757104100213Suche in Google Scholar

10Hamza, A. A., Fouda, I. M., El-Farahaty, K. A., Seisa, E. A.: Polym. Test10, p. 195 (1991)10.1016/0142-9418(91)90032-SSuche in Google Scholar

11Hamza, A. A., Fouda, I. M., Sokkar, T. Z. N., Shahin, M. M., Seisa, E. A.: Polym. Test16, p. 233 (1992)10.1016/0142-9418(92)90054-FSuche in Google Scholar

12Hamza, A. A., Fouda, I. M., Sokkar, T. Z. N., Shahin, M. M., Seisa, E. A.: Polym. Test11, p. 297 (1992)10.1016/0142-9418(92)90024-6Suche in Google Scholar

13Hamza, A. A., Fouda, I. M., Kabeel, M. A., Seisa, E. A., El-Sharkawy, F. M.: Polym. Test11, p. 303 (1997)10.1016/S0142-9418(96)00051-7Suche in Google Scholar

14Hamza, A. A., Fouda, I. M., Kabeel, M. A., Seisa, E. A., El-Sharkawy, F. M.: J. Appl. Polym. Sci. 76, p. 1957 (1998)Suche in Google Scholar

15Hamza, A. A., Sokkar, T. Z. N., El-Farahaty, K. A., El-Dessouky, H. M.: Optics and Laser in Engineering41, p. 261 (2004)10.1016/S0143-8166(02)00199-9Suche in Google Scholar

16Hamza, A. A., Sokkar, T. Z. N., El-Bakary, M. A., Ali, A. M.: Polym. Test22, p. 83 (2003)10.1016/S0142-9418(02)00053-3Suche in Google Scholar

17Hamza, A. A., El-Farahaty, K. A., Helaly, S. A.: Optica Applicata18, p. 133 (1988)Suche in Google Scholar

18Angad Gaur, H., De Vries, H.: J. Polym. Sci. 13, p. 835 (1975)10.1002/pol.1975.180130415Suche in Google Scholar

19Williams, D. J.: Polymer Science and Engineering, Prentice-Hall, Englewood Cliffs, NJ (1971)Suche in Google Scholar

20Pluta, M.: Optica Acta18, p. 661 (1971)10.1080/713818490Suche in Google Scholar

21Pluta, M.: J. Microsc. 96, p. 309 (1972)10.1111/j.1365-2818.1972.tb01061.xSuche in Google Scholar

22Huijts, R. A., Peters, S. M.: Polymer35, p. 3119 (1994)10.1016/0032-3861(94)90429-4Suche in Google Scholar

23Hermans, P. H.: Contribution to the Physics of Cellulose Fibre, North-Holland; Amsterdam (1946)Suche in Google Scholar

24De Vries, H.: Z. Colloid, Polym. Sci. 257, p. 226 (1979)10.1007/BF01382363Suche in Google Scholar

25Cunningham, A., Davies, G. R., Ward, I. M.: Polymer15, p. 743 (1976)10.1016/0032-3861(74)90027-5Suche in Google Scholar

26Griskey, R. G.: Polymer Process Engineering, Chapman & Hall (1995)10.1007/978-94-011-0581-1Suche in Google Scholar

27Born, M., Wolf, E.: Principles of Optics; Pergamon: New York (1989)Suche in Google Scholar

Received: 2005-9-3
Accepted: 2005-11-7
Published Online: 2013-04-06
Published in Print: 2006-05-01

© 2006, Hanser Publishers, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Pressure and Temperature Dependence of LDPE Viscosity and Free Volume: The Effect of Molecular Structure
  5. Correlations between Injection Molding Parameters, Morphology and Mechanical Properties of PPS Using Artificial Neural Networks
  6. Investigations into Kinematic Reversal in Non-isothermal Flows in Single-screw Machines
  7. The Effect of Post-extrusion Conditions in Ribbon Extrusion of Polymer Blends
  8. Effect of the Chemical and Morphological Conditions of the Die Wall on the Extrusion of Linear Polyolefins
  9. Investigation of the Heat Affected Zone of Hot-gas Welded PP Joints
  10. Method for the Optimisation of Screw Elements for Tightly Intermeshing, Co-rotating Twin Screw Extruders
  11. Rheology and Processing of Molten Poly(methyl methacrylate) Resins
  12. PLLA Morphology Controlled by Dry-cast Process
  13. Two Component Injection Molding of Phase Separating Blends
  14. A Low Force Valve for Dynamic Control of Molten Plastics in a Mold
  15. Influence of Drawing and Temperature on the Optical and Structural Properties of Monofilament PP Sutures
  16. Mechanical Properties of Rubber-toughened Post-industrial Glass-fiber-reinforced PA66
  17. Thermal Flow Instability in Metal Injection Molding: Experiment and Simulation
  18. Review Paper
  19. State of the Art: Recycling of EPDM Rubber Vulcanizates
  20. PPS News
  21. PPS News
  22. Seikei-Kakou Abstracts
  23. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.0107

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Pressure and Temperature Dependence of LDPE Viscosity and Free Volume: The Effect of Molecular Structure
  5. Correlations between Injection Molding Parameters, Morphology and Mechanical Properties of PPS Using Artificial Neural Networks
  6. Investigations into Kinematic Reversal in Non-isothermal Flows in Single-screw Machines
  7. The Effect of Post-extrusion Conditions in Ribbon Extrusion of Polymer Blends
  8. Effect of the Chemical and Morphological Conditions of the Die Wall on the Extrusion of Linear Polyolefins
  9. Investigation of the Heat Affected Zone of Hot-gas Welded PP Joints
  10. Method for the Optimisation of Screw Elements for Tightly Intermeshing, Co-rotating Twin Screw Extruders
  11. Rheology and Processing of Molten Poly(methyl methacrylate) Resins
  12. PLLA Morphology Controlled by Dry-cast Process
  13. Two Component Injection Molding of Phase Separating Blends
  14. A Low Force Valve for Dynamic Control of Molten Plastics in a Mold
  15. Influence of Drawing and Temperature on the Optical and Structural Properties of Monofilament PP Sutures
  16. Mechanical Properties of Rubber-toughened Post-industrial Glass-fiber-reinforced PA66
  17. Thermal Flow Instability in Metal Injection Molding: Experiment and Simulation
  18. Review Paper
  19. State of the Art: Recycling of EPDM Rubber Vulcanizates
  20. PPS News
  21. PPS News
  22. Seikei-Kakou Abstracts
  23. Seikei-Kakou Abstracts
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 6.9.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.0107/pdf
Button zum nach oben scrollen