Startseite Numerical Simulation of Viscous Flow in a Partially filled Co-rotating Twin Screw Extruder
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Numerical Simulation of Viscous Flow in a Partially filled Co-rotating Twin Screw Extruder

  • G. Pokriefke
Veröffentlicht/Copyright: 26. März 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 22 Heft 1

Abstract

The free-surface flow of fully melted material in the conveying section of a co-rotating twin screw extruder has been simulated numerically with the Finite Volume Method and an Eulerian multiphase model. In this model the interface is captured in an implicit manner with the help of the local volume fraction in a cell.

The results presented here reveal the power and conveying characteristics of the twin screw configuration. Some interesting findings are discussed for the power characteristic in the fully filled state as well. The flow field and derived quantities are discussed with regards to the axial transport, symmetries in the flow field and locations of high energy dissipation. All results are compared to the fully filled state.

Additionally, a new term, the volume flux based “conveying degree”, is introduced in this paper. The difference to the volume-based degree of fill is pointed out.

∗ Mail address: G. Pokriefke, Helmut-Schmidt-University, University of the Federal Armed Forces Hamburg, Institute of Mechanics, D-22039 Hamburg, Germany. E-mail:

References

1Rauwendaal, C.: Polymer Extrusion. Hanser-Publishers, Munich (2001)Suche in Google Scholar

2Schuler, W., in: Der Doppelschneckenextruder. VDI-Verlag, Düsseldorf (1995)Suche in Google Scholar

3Hensen, F., Knappe, W., Potente, H. (Eds): Handbuch der Kunststoffextrusionstechnik. Hanser Publishers, Munich (1989)Suche in Google Scholar

4Werner, H.: Das Betriebsverhalten der zweiwelligen Knetscheibenpresse vom Typ ZKS bei der Verarbeitung von hochviskosen Flüssigkeiten. PhD Thesis, TU Munich (1976)10.1002/cite.330490427Suche in Google Scholar

5Böhme, G., Wünsch, O.: Archive of Appl. Mech. 67, p. 167 (1997)10.1007/s004190050109Suche in Google Scholar

6Wünsch, O., Kühn, R., Heidemeyer, P.: SPE ANTEC Tech. Papers, p. 338 (2003)Suche in Google Scholar

7Mours, M. et al.: Intern. Polym. Process. 15, p. 124 (2000)Suche in Google Scholar

8White, J. L.: Principles of Polymer Engineering Rheology. John Wiley & Sons, New York (1990)Suche in Google Scholar

9Wünsch, O., Böhme, G.: Forschung im Ingenieurwesen66, p. 224 (2001)10.1007/s100100100056Suche in Google Scholar

10Ishikawa, T., Kihara, S., Funatsu, K.: Polym. Eng. Sci., p. 357 (2000)10.1002/pen.11169Suche in Google Scholar

11Booy, M. L.: Polym. Eng. Sci. 20, p. 1220 (1980)10.1002/pen.760201808Suche in Google Scholar

12Tenge, S.: Dissipation und Wärmeübergang in der Meteringzone eines gleichläufigen Doppelschneckenextruders. PhD Thesis, University Munich (1998)10.1002/cite.330690924Suche in Google Scholar

13Secor, R. M.: Polym. Eng. Sci. 26, p. 969 (1986)10.1002/pen.760261402Suche in Google Scholar

14De Graaf, R. A., Woldringh, D. J., Janssen, L.: Advances in Polym. Techn. 18, p. 295 (1999)10.1002/(SICI)1098-2329(199924)18:4<295::AID-ADV1>3.0.CO;2-ZSuche in Google Scholar

15Seidl, V. et al.: Paper presented at the 5th World Conference on Applied Fluid Mechanics within SIM (2001)Suche in Google Scholar

16Ferziger, J. H., Peric, M.: Computational Methods for Fluid Dynamics, Springer-Verlag, Berlin (2002)10.1007/978-3-642-56026-2Suche in Google Scholar

17Harlow, F. H., Welsh, J. E.: Phys. Fluids8, p. 2182 (1965)10.1063/1.1761178Suche in Google Scholar

18Hirt, C. W., Nichols, B. D.: J. Comp. Phys. 39, p. 201 (1981)10.1016/0021-9991(81)90145-5Suche in Google Scholar

19Osher, S., Sethian, J. A.: J. Comp. Phys. 79, p. 12 (1988)10.1016/0021-9991(88)90002-2Suche in Google Scholar

20Raithby, G. D., Xu, W. X., Stubley, G. D.: Comp. Fluid Dynamics J. 4, p. 353 (1995)Suche in Google Scholar

21Muzaferija, S., Perić, M.: Num. Heat Transfer Part B32, p. 369 (1997)10.1080/10407799708915014Suche in Google Scholar

22The, J. L., Raithby, G. D., Stubley, G. D.: Num. Heat Transfer Part B26, p. 367 (1994)10.1080/10407799408914935Suche in Google Scholar

23Böhme, G.: Z. Angew. Math. Mech. 76, p. 55 (1996)10.1002/zamm.19960760809Suche in Google Scholar

24CFX-5.7 Documentation (2005)Suche in Google Scholar

25Chhabra, R. P., Richardson, J. F.: Non-Newtonian Flow in the Process Industries. Butterworth-Heinemann, Oxford (1999)Suche in Google Scholar

26Patankar, S. V.: Numerical Heat Transfer and Fluid Flow. McGraw-Hill, New York (1980)Suche in Google Scholar

27Barth, T. J., Jesperson, D. C.: AIAA-Paper 89-0366 (1989)Suche in Google Scholar

28Zwart, P. J., Scheuerer, M., Bogner, M.: Paper presented at the ASTAR International Workshop on Advanced Numerical Methods for Multidimensional Simulation of Two-Phase-Flow, Germany (2003)Suche in Google Scholar

29Pokriefke, G.: Proc. Appl. Math. Mech. 3, p. 418 (2003)10.1002/pamm.200310480Suche in Google Scholar

30Pawlowski, J.: Transportvorgänge in Einwellenschnecken. Otto-Salle-Verlag, Frankfurt (1990)Suche in Google Scholar

31Böhme, G., Pokriefke, G.: Acta Mechanica176, p. 197 (2005)10.1007/s00707-004-0207-xSuche in Google Scholar

32Pokriefke, G.: Numerische Analyse reibungsbehafteter Strömungen in teilgefüllten Extrudern. PhD Thesis, Helmut-Schmidt-University Hamburg (2005)Suche in Google Scholar

33Böhme, G.: Strömungsmechanik nicht newtonscher Fluide, Teubner-Verlag, Stuttgart (2000)10.1007/978-3-322-80140-1Suche in Google Scholar

34Böhme, G., Wünsch, O.: Z. Angew. Math. Mech. 81, p. 459 (2001)10.1002/zamm.20010811509Suche in Google Scholar

35Wünsch, O., Böhme, G.: Archive of Appl. Mech. 70, p. 91 (2000)10.1007/s004199900042Suche in Google Scholar

Received: 2005-8-24
Accepted: 2006-9-19
Published Online: 2013-03-26
Published in Print: 2007-03-01

© 2007, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. International Polymer Processing Special Issue: European Coating Symposium 2005, University of Bradford, UK
  5. Invited Papers
  6. Coating and Polymer Processing
  7. Practical Limitations to Carrier Layer Formation on Inclined Planes
  8. Simulation of 3D Crystallization of Colloidal Nanoparticles on a Substrate during Drying
  9. Asymmetric Surface Roughness Formationon Moving Non-isothermal Liquid Coatings
  10. Inkjet Printing of Conductive and Resistive Coatings
  11. Moisture Sorption and Transport in Polylactide
  12. 10.3139/217.0992
  13. Review Article
  14. Welding of Plastics: Fundamentals and New Developments
  15. Regular Contributed Articles
  16. Numerical Simulation of Viscous Flow in a Partially filled Co-rotating Twin Screw Extruder
  17. Invited Papers
  18. A New Calculation Model and Optimization Method for Maddock Mixers in Single Screw Plasticising Technology
  19. Regular Contributed Articles
  20. Residual Wall Thickness Distribution at the Transition and Curve Sections of Water-assisted Injection Molded Tubes
  21. Numerical Simulation of Extrusion Coating
  22. Correlation between Injection Molding Parameters, Morphology and Mechanical Properties of PPS/SEBS Blend Using Artificial Neural Networks
  23. PPS News
  24. PPS News
  25. Seikei-Kakou Abstracts
  26. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.0104

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. International Polymer Processing Special Issue: European Coating Symposium 2005, University of Bradford, UK
  5. Invited Papers
  6. Coating and Polymer Processing
  7. Practical Limitations to Carrier Layer Formation on Inclined Planes
  8. Simulation of 3D Crystallization of Colloidal Nanoparticles on a Substrate during Drying
  9. Asymmetric Surface Roughness Formationon Moving Non-isothermal Liquid Coatings
  10. Inkjet Printing of Conductive and Resistive Coatings
  11. Moisture Sorption and Transport in Polylactide
  12. 10.3139/217.0992
  13. Review Article
  14. Welding of Plastics: Fundamentals and New Developments
  15. Regular Contributed Articles
  16. Numerical Simulation of Viscous Flow in a Partially filled Co-rotating Twin Screw Extruder
  17. Invited Papers
  18. A New Calculation Model and Optimization Method for Maddock Mixers in Single Screw Plasticising Technology
  19. Regular Contributed Articles
  20. Residual Wall Thickness Distribution at the Transition and Curve Sections of Water-assisted Injection Molded Tubes
  21. Numerical Simulation of Extrusion Coating
  22. Correlation between Injection Molding Parameters, Morphology and Mechanical Properties of PPS/SEBS Blend Using Artificial Neural Networks
  23. PPS News
  24. PPS News
  25. Seikei-Kakou Abstracts
  26. Seikei-Kakou Abstracts
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 8.9.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.0104/html
Button zum nach oben scrollen