Startseite The Effect of Post-extrusion Conditions in Ribbon Extrusion of Polymer Blends
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

The Effect of Post-extrusion Conditions in Ribbon Extrusion of Polymer Blends

  • D. Ramirez-Arreola , H. Padilla-López , R. González-Núñez und D. Rodrigue
Veröffentlicht/Copyright: 6. April 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 21 Heft 2

Abstract

Blends of high density polyethylene and polystyrene were produced via ribbon extrusion to study the effect of post-extrusion conditions on the ribbon final dimensions and morphology. An experimental setup was designed to measure the stretching force as a function of draw ratio and water contact distance for blends of 3, 6 and 9% PS in HDPE. Numerical simulations of the non-isothermal process using Matlab were in good agreement with the experimental data only when both viscous and elastic effects are included. The results show that both draw ratio and water contact distance have a definite influence on the final dimensions of the ribbon and the stretching force. It was found that deformation of the dispersed phase increases with draw ratio, but decreases with water contact distance.

∗ Mail address: R. González-Núñez, Departamento de Ingeniería Química, Universidad de Guadalajara, Blvd. Gral. Marcelino García Barragán #1451, Guadalajara, Jalisco, 44430, Mexico. E-mail:

References

1Pearson, J. R. A.: Mechanical Principles of Polymer Melt Processing. Pergamon Press, New York (1966)Suche in Google Scholar

2Acierno, D., Di Maio, L., Ammirati, C. C.: Polym. Eng. Sci. 40, p. 108 (2000)10.1002/pen.11143Suche in Google Scholar

3Lamberti, G., Titomanlio, G., Brucato, V.: Chem. Eng. Sci. 56, p. 5749 (2001)10.1016/S0009-2509(01)00286-XSuche in Google Scholar

4Cotto, D., Saillard, P., Agassant, J. F., Haudin, J. M.: Interrelations between Processing Structure and Properties of Polymeric Materials. Elsevier Science Publishers, Amsterdam (1984)Suche in Google Scholar

5Smith, S., Stolle, D.: Polym. Eng. Sci. 40, p. 1870 (2000)10.1002/pen.11319Suche in Google Scholar

6Sollogoub, C., Demay, Y., Agassant, J. F.: Intern. Polym. Proc. 18, p. 80 (2003)10.3139/217.1725Suche in Google Scholar

7Iyengar, V. R., Co, A.: Chem. Eng. Sci. 51 (9), p. 1417 (1996)10.1016/0009-2509(95)00316-9Suche in Google Scholar

8Silagy, D., Demay, Y., Agassant, J. F.: Polym. Eng. Sci. 36, p. 2614 (1996)10.1002/pen.10661Suche in Google Scholar

9Satoh, N., Tomiyama, H., Kajiwara, T.: Polym. Eng. Sci. 41, p. 1564 (2001)10.1002/pen.10855Suche in Google Scholar

10Acrivos, A.: 4th Int. Conf. Phys. Hyd. Acad. Sci., New York, p. 404 (1983)Suche in Google Scholar

11Rallison, J. M.: Ann. Rev. Fluid Mech. 16, p. 45 (1984)10.1146/annurev.fl.16.010184.000401Suche in Google Scholar

12Stone, H. A.: Ann. Rev. Fluid Mech. 26, p. 65 (1994)10.1146/annurev.fl.26.010194.000433Suche in Google Scholar

13Wu, S.: Polym. Eng. Sci. 27, p. 335 (1987)10.1002/pen.760270506Suche in Google Scholar

14Stone, H. A., Leal, L. G.: J. Fluid Mech. 220, p. 161 (1990)10.1017/S0022112090003226Suche in Google Scholar

15Almusallam, A. S., Larson, R. G., Solomon, M. J.: J. Rheol. 44, p. 1055 (2000)10.1122/1.1287288Suche in Google Scholar

16Hooper, R. W., de Almeida, V. F., Macosko, C. W., DerbyJ. J.: JNNFM98, p. 141 (2001)10.1016/S0377-0257(01)00112-4Suche in Google Scholar

17Tretheway, D. C., Leal, L. G.: JNNFM99, p. 81 (2001)10.1016/S0377-0257(01)00123-9Suche in Google Scholar

18Van Puyvelde, P., Velankar, S., Mewis, J., Moldenaers, P.: Polym. Eng. Sci. 42, p. 1956 (2002)10.1002/pen.11088Suche in Google Scholar

19Guido, S., Simeone, M., Greco, F.: JNNFM114, p. 65 (2003)10.1016/S0377-0257(03)00118-6Suche in Google Scholar

20Chen, H. B., Sundararaj, U., Nandakumar, K.: Polym. Eng. Sci. 44, p. 1258 (2004)10.1002/pen.20121Suche in Google Scholar

21Lerdwijitjarud, W., Sirivat, A., Larson, R. G.: J. Rheol. 48, p. 843 (2004)10.1122/1.1753275Suche in Google Scholar

22Maffettone, P. L., Greco, F.: J. Rheol. 48, p. 83 (2004)10.1122/1.1626675Suche in Google Scholar

23Yu, W., Bousmina, M., Zhou, C. X., Tucker, C. L.: J. Rheol. 48, p. 417 (2004)10.1122/1.1647559Suche in Google Scholar

24Duffo, P., Monasse, B., Haudin, J. M.: J. Polym. Eng. 10, p. 151 (1991)10.1515/POLYENG.1991.10.1-3.151Suche in Google Scholar

25Perry, R. H.: Perry's Chemical Engineer's Handbook, Chap.10, 6th Ed.McGraw-Hill, New York (1984)Suche in Google Scholar

26Muke, S., Connell, H., Sbarski, I., Bhattacharya, S. N.: JNNFM116, p. 113 (2003).10.1016/j.jnnfm.2003.09.002Suche in Google Scholar

27Padilla-López, H., Vázquez, M., González-Núñez, R., Rodrigue, D.: Polym. Eng. Sci. 43, p. 1646 (2003)10.1002/pen.10138Suche in Google Scholar

28Bourry, D., Godbille, F., Khayat, R. E., Luciani, A., Picot, J., Utracki, L. A.: Polym. Eng. Sci. 39, p. 1072 (1999)10.1002/pen.11495Suche in Google Scholar

29Macosko, C. W.: Rheology: Principles, Measurements, and Applications. VCH Publishers, New York (1994)Suche in Google Scholar

30Schlatter, G., Serra, C., Bouquey, M., Muller, R., Terrisse, J.: Polym. Eng. Sci. 42, p. 1965 (2002)10.1002/pen.11089Suche in Google Scholar

31Cho, Y. G., Kamal, M. R.: Polym. Eng. Sci. 42, p. 2005 (2002)10.1002/pen.11092Suche in Google Scholar

32Vázquez, M. O., Gloria Bello, O., González-Núñez, R., Arellano, M., Moscoso, F. J.: SPE ANTEC Tech. Papers398, p. 2097 (2004)Suche in Google Scholar

Received: 2005-4-18
Accepted: 2005-11-21
Published Online: 2013-04-06
Published in Print: 2006-05-01

© 2006, Hanser Publishers, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Pressure and Temperature Dependence of LDPE Viscosity and Free Volume: The Effect of Molecular Structure
  5. Correlations between Injection Molding Parameters, Morphology and Mechanical Properties of PPS Using Artificial Neural Networks
  6. Investigations into Kinematic Reversal in Non-isothermal Flows in Single-screw Machines
  7. The Effect of Post-extrusion Conditions in Ribbon Extrusion of Polymer Blends
  8. Effect of the Chemical and Morphological Conditions of the Die Wall on the Extrusion of Linear Polyolefins
  9. Investigation of the Heat Affected Zone of Hot-gas Welded PP Joints
  10. Method for the Optimisation of Screw Elements for Tightly Intermeshing, Co-rotating Twin Screw Extruders
  11. Rheology and Processing of Molten Poly(methyl methacrylate) Resins
  12. PLLA Morphology Controlled by Dry-cast Process
  13. Two Component Injection Molding of Phase Separating Blends
  14. A Low Force Valve for Dynamic Control of Molten Plastics in a Mold
  15. Influence of Drawing and Temperature on the Optical and Structural Properties of Monofilament PP Sutures
  16. Mechanical Properties of Rubber-toughened Post-industrial Glass-fiber-reinforced PA66
  17. Thermal Flow Instability in Metal Injection Molding: Experiment and Simulation
  18. Review Paper
  19. State of the Art: Recycling of EPDM Rubber Vulcanizates
  20. PPS News
  21. PPS News
  22. Seikei-Kakou Abstracts
  23. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.0055

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Pressure and Temperature Dependence of LDPE Viscosity and Free Volume: The Effect of Molecular Structure
  5. Correlations between Injection Molding Parameters, Morphology and Mechanical Properties of PPS Using Artificial Neural Networks
  6. Investigations into Kinematic Reversal in Non-isothermal Flows in Single-screw Machines
  7. The Effect of Post-extrusion Conditions in Ribbon Extrusion of Polymer Blends
  8. Effect of the Chemical and Morphological Conditions of the Die Wall on the Extrusion of Linear Polyolefins
  9. Investigation of the Heat Affected Zone of Hot-gas Welded PP Joints
  10. Method for the Optimisation of Screw Elements for Tightly Intermeshing, Co-rotating Twin Screw Extruders
  11. Rheology and Processing of Molten Poly(methyl methacrylate) Resins
  12. PLLA Morphology Controlled by Dry-cast Process
  13. Two Component Injection Molding of Phase Separating Blends
  14. A Low Force Valve for Dynamic Control of Molten Plastics in a Mold
  15. Influence of Drawing and Temperature on the Optical and Structural Properties of Monofilament PP Sutures
  16. Mechanical Properties of Rubber-toughened Post-industrial Glass-fiber-reinforced PA66
  17. Thermal Flow Instability in Metal Injection Molding: Experiment and Simulation
  18. Review Paper
  19. State of the Art: Recycling of EPDM Rubber Vulcanizates
  20. PPS News
  21. PPS News
  22. Seikei-Kakou Abstracts
  23. Seikei-Kakou Abstracts
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 6.9.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.0055/pdf
Button zum nach oben scrollen